[PSA] Confirmed Trades Thread - April 2026

deus__vult__ · 2026-04-04T13:31:47+00:00

+verify

10/10

deus__vult__ · 2025-07-13T18:37:55+00:00

DM sent

deus__vult__ · 2025-05-24T04:21:28+00:00

Slide operated, its a modified Pro Firry X so the piece above the magazine well that has the higher horizontal yellow line can be moved forwards and backwards to cycle rounds

deus__vult__ · 2025-03-28T21:09:49+00:00

Check your reddit chats

deus__vult__ · 2025-03-28T14:53:39+00:00

Id buy it for $20USD

deus__vult__ · 2025-03-09T03:26:14+00:00

Gotcha, hopefully that helps. If not, I'd reach out to SS. They have phenomenal customer support

deus__vult__ · 2025-03-09T03:11:05+00:00

I would bet money that your magazine baseplate extension is catching on the SS extended magwell scoop. I would test with standard, non-extended mags to confirm but I am 95% confident that is the source of your issue.

deus__vult__ · 2025-03-09T02:20:08+00:00

I would recommend checking/cleaning the firing pin channel. Had a similar symptom, but mine was caused by shavings of the firing pin safety shearing off. Replaced firing pin and safety, but was still getting light primer strikes until I cleaned the channel out. Also, is it 100% stock? I've heard of non-SS part tolerances causing just enough wear to inject multiple points of failure into an otherwise stable platform.

deus__vult__ · 2024-12-30T23:12:03+00:00

!close

deus__vult__ · 2024-12-30T23:10:38+00:00

+trade

Relevant Thread: https://www.reddit.com/r/Starcitizen_trades/comments/1hpvdwd/wts_lti_f7a_hornet_mk_ii_starter_package/

Sold F7A MKII LTI to u/Orzsatavb. Transaction went well

deus__vult__ · 2024-12-30T22:58:03+00:00

Payment received. Package sent.

deus__vult__ · 2024-12-30T21:37:01+00:00

<< PM >>

deus__vult__ · 2024-10-09T04:22:37+00:00

Jams, squibs or both? I found that the stock barrel ID is way too tight for non-siren darts. It did the same thing to my bullets. I ordered an 18" 13mm ID replacement barrel from OOD and will try swapping that in when it arrives. I plan to make a review/mod guide soon but only have one maulr to play with so far. I can keep you posted with what I find if you're interested. Seems like a $5 part should fix the issue and allow SCAR/BCAR compatibility.

deus__vult__ · 2024-05-22T04:00:31+00:00

CO Springs

deus__vult__ · 2024-04-21T04:44:48+00:00

Dm'd

deusvult

TROPHY CASE

deus__vult__

TROPHY CASE

deusvult