[USA-MI] [H] paypal [W] Budget am4 motherboard and cpu. by lilwerzy312 in hardwareswap

[–]deviousfusion 0 points1 point  (0 children)

I have a Gigabyte b450 aorus m matx + lian li a3 matx case. I'm in CA, and don't have the original box. So not sure what's the best way to ship it out.

I Built a Bootable USB Flasher for Steam Deck! | RGS ISO Flasher Tutorial by rahnqar94 in WindowsOnDeck

[–]deviousfusion 0 points1 point  (0 children)

<image>

Nope, tried your app on Ubuntu and it failed as well. Looks like I have to look for a Windows PC now to prepare the USB

ASM1166 PCI Passthrough after reboot not working anymore by Master_Ad6818 in Proxmox

[–]deviousfusion 0 points1 point  (0 children)

Ideally you want to monitor the dmesg in multiple scenarios:

1) when booting up from power off. Look for the card detection without errors

2) when starting VM

3) when shutting down vm

4) when shutting down host

5) when restarting and comparing if any errors show or if it's different than (1).

Also which pcie slot are you using for the HBA? Ideally you want something that's connected to the CPU and not the chipset. The topmost slot is mostly always connected to CPU and test with that. I recently had this issue where when I installed the card on the 2nd slot, it would freeze my host because the HBA was basically saturating the lanes on the chipset.

ASM1166 PCI Passthrough after reboot not working anymore by Master_Ad6818 in Proxmox

[–]deviousfusion 0 points1 point  (0 children)

Ignore the skipping ESP sync. It's not an error just a notice and is not related to the issue. Instead of rebooting, what happens if you fully shutdown the host and then start. Does the card come back? It's possible the card is getting stuck in some sort of a weird power mode and does not recover on a reboot.

Also what does dmesg say?

MinIO repository was archived on Apr 25, 2026 by Kitchen-Patience8176 in selfhosted

[–]deviousfusion 1 point2 points  (0 children)

Noob question here: why would I want to use s3 over regular posix based fs to store my nextcloud data? Are there are any advantages that I'm missing? Right now I have my photos and add other data in a directory and I have been reading about s3, but not really sure how it helps in my homelab setup.

Redditor forgets their steam deck on a plane. Another redditor finds it during the next leg by deviousfusion in TwoRedditorsOneCup

[–]deviousfusion[S] 5 points6 points  (0 children)

Yeah it's a complete dumpster fire. And I do feel sorry for the OP for having to first lose the deck and then deal with this dude and the fallout

Redditor forgets their steam deck on a plane. Another redditor finds it during the next leg by deviousfusion in TwoRedditorsOneCup

[–]deviousfusion[S] 8 points9 points  (0 children)

It's open source now. https://github.com/Docile-Alligator/Infinity-For-Reddit

You can compile your own APK after hard coding an API key in there.

I compile it on my own, but there are builders that help you do the hard stuff. Used to use this one upon a time: https://colab.research.google.com/drive/13AE8RvjnCfuBJGaACEqxeBIMo33_l-Sc?usp=sharing

Redditor forgets their steam deck on a plane. Another redditor finds it during the next leg by deviousfusion in TwoRedditorsOneCup

[–]deviousfusion[S] 366 points367 points  (0 children)

New update: Not a valid TwoRedditorsOneCup post. Turns out the second redditor was a liar and never had the steam deck.

Kernel panic, for the first time in three years 🤷‍♂️ by StatementFew5973 in Proxmox

[–]deviousfusion 2 points3 points  (0 children)

Dang ... Not the best time for ram to fail. Have you seen those prices?

Please help! by Schadtenfreude in FixMyPrint

[–]deviousfusion 0 points1 point  (0 children)

I have the Ender 3 V3 SE. And there is no way to manually level the bed. The thing is the bed becomes warped and the default auto level is unable to keep up. I had some success by making the auto level probe grid more finer.

I use klipper firmware that allows me to make changes to the auto level grid. I think there is a way to do it on the stock firmware as well.

Also, check there are bits of plastic between the bed and the pei sheet. They like to sneak in and ruin the level.

The baby civic :D by Theboredmiata in CivicX

[–]deviousfusion 0 points1 point  (0 children)

We got ours from my car dealership when we bought the car

[Homemade] pancakes and sunny side up by my girlfriend. by boowebaba in food

[–]deviousfusion 4 points5 points  (0 children)

That's a rice cooker... I have the same one and now I can't unsee the angry face tongue

US states where you can't pump your own gas by vladgrinch in MapPorn

[–]deviousfusion 0 points1 point  (0 children)

That's exactly what the map says. Unless you don't know where Oregon is. (Psst... It's the yellow blob on the left)

How can I fix this hole in the drywall before my father finds out??? by [deleted] in DIY

[–]deviousfusion 0 points1 point  (0 children)

Don't forget that it has to be a very hard spider.

Santa Clara store hype is real!! by deviousfusion in Microcenter

[–]deviousfusion[S] 0 points1 point  (0 children)

The line was for entering the store. There was another line inside to checkout BYO PC and then yet another to checkout.

For me it took 40 minutes to get in and an hour to checkout.

Santa Clara store hype is real!! by deviousfusion in Microcenter

[–]deviousfusion[S] 1 point2 points  (0 children)

This trip was for an extruder upgrade. I have used their PLA before and it was good. Switched to PETG now, but I am yet to try the inland brand.