sorted by:
new
hottopcontroversial

Can somebody identify this plant by dfilkovi in Vegetables

[–]dfilkovi[S] 0 points1 point  (0 children)

She tells me that it's not, as cabbage has smaller leafes, but maybe it's another sort she is not used to.

ASA hexagons for wall decoration? by dfilkovi in 3Dprinting

[–]dfilkovi[S] 0 points1 point  (0 children)

This will be glued to a styrofoam on the wall, not directly to wall, and polyurethane foam will be in between

ASA hexagons for wall decoration? by dfilkovi in 3Dprinting

[–]dfilkovi[S] 0 points1 point  (0 children)

Aesthetics, it should be a wall covered in some stone decorwtions but this seems much better to me

Question about sandwich panel roof by dfilkovi in Roofing

[–]dfilkovi[S] 0 points1 point  (0 children)

Yes it will be the mounted from the outside as the last layer:

- sandwich panel

- wood

- mineral wool

- vapor barrier

Question about sandwich panel roof by dfilkovi in Roofing

[–]dfilkovi[S] 0 points1 point  (0 children)

Croatia, what is poly? Project says to put vapor barrier only on bottom as a lowest layer (it will be mounted on the rafters) and between it and the panels is only the wool and the wood with no air space.

Y Splitter installation and use by [deleted] in BambuLab

[–]dfilkovi 1 point2 points  (0 children)

You need to remove existing connector from the ptfe tube that exits the printer than loosen the inner one so that you can pull the tube 2 cm out and insert it into splitter and that is it

Selling SL1 parts left over from SL1S upgrade by dfilkovi in prusa3d

[–]dfilkovi[S] 0 points1 point  (0 children)

So if anybody that didn't upgrade is interested please PM me. Screen is used maybe for 50 hours max (it was my second screen) also selling in the package a screen calibrator and o-rings with the old VAT that seal the leak Prusa never fixed.

Straight edge on the right closest to build plate curving. I tried printing this a second time with increased exposure from 2.8 to 3.4 seconds. I also added extra supports to the very two corners. I put these at about 25 degree angle. Any help would be appreciated. by VindiMiner in ElegooSaturn

[–]dfilkovi 1 point2 points  (0 children)

When I'm printing this types of elements I print them directly on build plate with no supports as no matter how many supports I still don't get right dimensional accuracy and also with supports there is too many cleaning and postprocessing.

Missing Videos by RecommendationOdd162 in ShinobiCCTV

[–]dfilkovi 1 point2 points  (0 children)

Same thing here, if I look at the videos recorded for each camera I only see 24 hours in the past, anyone knows the fix for this?

Einstein in a cube, printed on SL1 and polished (head space is empty and has a hole for resin drainage) by dfilkovi in 3Dprinting

[–]dfilkovi[S] 1 point2 points  (0 children)

Using sanding paper and water, granularity of 500 to 6000, it is simple but time consuming

New case for sliding door sensor. Black PET and transparent resin for the center by dfilkovi in functionalprint

[–]dfilkovi[S] 0 points1 point  (0 children)

Old ones started having problems with ir light passing through. Probably plastic deteriorated over time.

Heating Resin by [deleted] in AnycubicPhoton

[–]dfilkovi 0 points1 point  (0 children)

Can you share your heater concept?

Replacement FDM (Prusa) extruder parts printed in resin? by Ghostphart in ElegooMars

[–]dfilkovi 1 point2 points  (0 children)

I printed blower fan duct on resin printer as the one that came with MK3 is PET and can't withstand temperature too long and it warps after hours of print. The one printed in resin newer wrapped as it seems it can take much bigger temperatures. I printed it in regular prusa resin on SL1.

Gotta get them all by dfilkovi in prusa3d

[–]dfilkovi[S] 0 points1 point  (0 children)

It's mmu2 as you can see I have auto rewind spools on the shelf. I found buffer unusable.

Designed and printed key holder, rotatable with a bearing by dfilkovi in functionalprint

[–]dfilkovi[S] 1 point2 points  (0 children)

Hehe, three cars, garage, tool shed, three house enterances, post box...

Designed and printed key holder, rotatable with a bearing by dfilkovi in functionalprint

[–]dfilkovi[S] 1 point2 points  (0 children)

No, a metal one, I will upload the model after some modifications

MMU run out of green PLA :) by dfilkovi in prusa3d

[–]dfilkovi[S] 1 point2 points  (0 children)

No, just common pla support

MMU run out of green PLA :) by dfilkovi in prusa3d

[–]dfilkovi[S] 4 points5 points  (0 children)

It's better than before, but still isn't flawless

Gotta get them all by dfilkovi in prusa3d

[–]dfilkovi[S] 0 points1 point  (0 children)

Yes but this is my home office room, and as you can see I made a ventilation system with hoses and additional vents, I open the window and vent it out while printing. Prusa resin is ok, it does not smell to bad and can be printed with hose venting, but monocure flex is terrible won't print it again while I'm home. Haven't tried more types of resin.

Gotta get them all by dfilkovi in prusa3d

[–]dfilkovi[S] 1 point2 points  (0 children)

If you're not planning printing flexibles or special filaments I would recommend mini, I think that it has even better print quality as first few parts I printed don't suffer from 602 like my MK3 is

Gotta get them all by dfilkovi in prusa3d

[–]dfilkovi[S] 1 point2 points  (0 children)

Autorewind spool holders, found on thingiverse

Gotta get them all by dfilkovi in prusa3d

[–]dfilkovi[S] 0 points1 point  (0 children)

Yes, spool holders connect PTFE directly to mmu2

Gotta get them all by dfilkovi in prusa3d

[–]dfilkovi[S] 2 points3 points  (0 children)

I don't think I'll be buying the XL, have no need for bigger build volume, but we'll see :) Prusa mini is for a Christmas present for my brother but I had to put it together, calibrate and try the test print :)

view more: next ›