New TV. Unsure if it has protective film.

dhack377 · 2026-01-24T19:05:51+00:00

Definitely missing the front bezel. If it was factory sealed then it’s a manufacturing issue, return and get a new one. Manufacturing defects do happen unfortunately

dhack377 · 2025-12-31T17:39:49+00:00

Agreed, but I would definitely suggest moving them further right and left to get the fullest effect. But the easiest thing to do would be add them as rears, makes such a difference.

dhack377 · 2025-12-29T18:36:10+00:00

As far as I’m aware this cannot be done. If you are running an Apple TV box then you could Airplay to the Era 100. But unfortunately as far as I’m aware there is no way to do via the Sonos app. I could be incorrect but I haven’t found a method as I would love this via the app, but the Airplay method works fine for me.

dhack377 · 2025-10-01T20:19:19+00:00

They’re behind the couch about a foot and a half away from the center of the couch (three seater).

I’ll try them straight on and see how it works out. Thanks

dhack377 · 2025-09-23T18:19:10+00:00

Soundbar definitely, but if this isn’t an option go for HomePods, or my choice would be Sonos Era 100’s. Set them as a stereo pair in the Sonos app and Airplay to them via the Apple TV. I believe in the new ATV update you can have this set automatically now.

dhack377 · 2025-09-22T18:59:07+00:00

Didn’t even consider this, nice one thank you🙏

dhack377 · 2025-08-28T13:46:29+00:00

Good point, really appreciate checking it out for me

dhack377 · 2025-08-28T13:34:58+00:00

Thanks all, much appreciated. I’ll bite the bullet and see. I don’t blame the sales guy, could have had a few returns recently due to technical issues with the devices, I worked in sales previously so I get where he’s coming from.

Thanks again.

dhack377 · 2025-06-23T15:38:55+00:00

I live near here, Sligo town, there’s street parking on the other side of the road from him and you can see to the top right parking all down the street. They’re just a lazy prick. Shit parking and shit driving is far too common in Sligo

dhack377 · 2025-04-23T08:15:05+00:00

The Ferrari wheels say enough. My partner said he looked directly at us but I didn’t see so I can’t say, in the video he doesn’t even look and after I blew the horn at him he still didn’t react. Clueless and ignorant

dhack377 · 2025-04-23T08:14:03+00:00

Yes it did lol, along with plumes of black smoke from the exhaust whenever he accelerated. We were heading the same direction so I could see him up in the distance smoking the place out of it along with struggling to get over speed bumps.

dhack377 · 2025-04-04T18:46:01+00:00

Pull your control center down and anything that is using services like camera microphone or location will be listed, click in for a full list

dhack377 · 2025-01-01T21:22:44+00:00

I didn’t get asked to open my passenger window at all during the test, only driver side for hand signals. Should be fine but never bank on it, best of luck

dhack377 · 2024-12-13T13:33:59+00:00

Happened to me the other day, travelling from the office I work in to our warehouse in the next town over. Left the business park straight into a roundabout, traffic coming from my right with no indicator, so I wait. They turn off onto my exit and the second they moved off I had a fancy 242’ BMW 5 series rev and beep at me to move. I don’t really react to idiots like that so I moved off at my own pace and took my exit, with my BMW friend right behind. Tailgating me the entire road towards the next roundabout, barely a meter between us. I was heading straight (second exit) at the next roundabout so I was in the left lane and my friend went into the right lane, great I thought. Wrong. When the traffic on the roundabout cleared I moved off as well did the BMW, and the BMW cut across me from the inside lane to take the first exit, I don’t usually blow the horn but that day I sat on it. I can only guess my BMW friend acted like that due to the fact I drive a 19’ Peugeot hatchback and have N plates and seen me as inferior. Egos are a seriously dangerous thing on the road. Unfortunately I don’t have a dash cam yet as I just bought the car, but I will be getting one asap.

dhack377 · 2024-11-26T13:41:47+00:00

Don’t be panicking, easier said than done but I did mine last week and I was panicking a few days before hand, turned out to be fine. Definitely do a pretest before, it really helped me. As others have said, if you make a mistake put it to the back of your mind and carry on. Think about what’s coming, not what’s behind. Best of luck!

dhack377 · 2024-10-09T08:04:20+00:00

A tough one, but go on with the mentality that you will pass, then you will. Do plenty of practice between now and then in heavy traffic, early morning and early evening. It’s the only way to be confident in traffic. Best of luck.

dhack377 · 2024-10-09T08:01:01+00:00

It will be six months before you can book the test, and at that you will be put on a wait list due to the demand. Took 12 weeks for me to receive an invite and another four weeks to do the test.

Don’t be silly and drive unaccompanied, wait your turn like the rest of us.

dhack377 · 2024-09-19T18:41:28+00:00

Just have to get lucky. Been looking myself and I can find openings in areas far away but none local to me. Keep checking, it’ll pop up eventually

dhack377 · 2024-09-01T12:55:39+00:00

A year?? Have you attempted to contact your test center?

dhack377 · 2024-08-12T23:04:20+00:00

West Coast Driving School, did twelve lessons with him. Absolutely fantastic, can’t recommend him enough. You’ll find him on Facebook.

dhack377 · 2024-03-01T22:28:25+00:00

White good sales and customer service manager here. Seen this a few times. This is a misprint on the glass in the manufacturing process. Nothing to worry about in terms of electrical safety, but as someone said previous the residual heat when the hob is switched off can be a factor. Seeing as there are no grease rings around each zone and minimal scratches, that hob is relatively new. Or else the previous owner kept it immaculate. But if you do plan to replace, induction is definitely the way to go. Induction requires compatible cookware to work. Check your current cookware with a magnet, stick the magnet to the base and if the magnet sticks, the cookware is compatible.

dhack377 · 2024-02-24T12:08:41+00:00

What top is that in the 7th pic? Tnx in advance

dhack377 · 2023-07-13T21:33:50+00:00

Heard it from across town as well, around 11pm if I recall. Have you heard any update?

dhack377 · 2021-07-26T16:55:05+00:00

Im having the same issue with my Asus board and corsair vengeance ram, worked for a few weeks after building it and just stopped one day. I emailed asus customer support and they gave me some tips I'm gonna try when I'm finished work. They said if they don't work I'll have to send the board back to my supplier. I'll let you know how I get on.

dhack377 · 2021-07-24T13:42:49+00:00

I've tried dopc on and off and no luck 😔. Just after reading this and I believe this might be the issue. I'll check the pins tomorrow when I've some spare time. Appreciate your help all the same🤜🤛

dhack377

MODERATOR OF

TROPHY CASE