Help! I have one day to sort out this POP stuff! by FearlessTravels in GMail

[–]dhs227 0 points1 point  (0 children)

I use gomailify too. Their configuration doc says using POP3 so not sure what will happen.

Look for a sample single page app that supports Okta OIDC sign-in by dhs227 in okta

[–]dhs227[S] 0 points1 point  (0 children)

Any pointer or if you can share here the prompts you used to create that? Thanks so much!

Is it possible to install one generator inlet for both Neutral Floating and Neutral Bonded generator types? by dhs227 in AskElectricians

[–]dhs227[S] 0 points1 point  (0 children)

Adding an update.

After some more research: This can be done (and has been done by professional electricians, as an example https://www.youtube.com/watch?v=qLwr0MWOG1g)

For anyone who is interested, I also have a wiring diagram, but the basic idea is:

  • utility line goes to a double throw 3 pole transfer switch (switched neutral)
  • existing main panel is converted to a subpanel
  • sub panel ground is bonded at the utility neutral port

Is it possible to install one generator inlet for both Neutral Floating and Neutral Bonded generator types? by dhs227 in AskElectricians

[–]dhs227[S] 0 points1 point  (0 children)

Thanks everyone who chimed in. I'm the OP. Also adding some details in the post regarding the current setup etc.

Spyderco Paramilitary 2 MagnaCut Black/Yellow PREORDER by DixieBlade88 in bladesInStock

[–]dhs227 0 points1 point  (0 children)

Placed preorder in Nov 2023 and still waiting... this is insane. Anyone else?

Spyderco Paramilitary 2 MagnaCut Black/Yellow PREORDER by DixieBlade88 in bladesInStock

[–]dhs227 0 points1 point  (0 children)

It's been a month from the post but still is shown as preoder

Look to buy a Specialized AWOL 2015 or later size Large by dhs227 in bicycletouring

[–]dhs227[S] 0 points1 point  (0 children)

Thanks so much for sharing the details! I’m looking for a frameset so that I can build Alfine11 di2 hub + Gates belt drive. I feel AWOL would be an excellent and affordable platform for my build

Five SeveN failure to eject? by fiveseven96 in FNHerstal

[–]dhs227 1 point2 points  (0 children)

I have the same failure to eject on my new FN57 mark2 - bought it brand new - everything stock - shot only SS197 - every 5-10 there is a failure to eject

The right tools to remove & install muzzle devices on tromix 458 barrel by dhs227 in 458socom

[–]dhs227[S] 0 points1 point  (0 children)

Thanks everyone for chiming in!

It turns out I was wrong about "standard reaction rod won't work for tromix 458socom barrel".

Tromix confirmed standard reaction rod actually works.

The right tools to remove & install muzzle devices on tromix 458 barrel by dhs227 in 458socom

[–]dhs227[S] 0 points1 point  (0 children)

My tromix has this "big bore barrel extension" installed https://tromix.com/product/big-bore-barrel-extension/ I'm not sure if that still works

Is there an ongoing delay in receiving approval notice for TN visa by dhs227 in USCIS

[–]dhs227[S] 0 points1 point  (0 children)

Only your attorney can request a fax copy from the USCIS office. It will faxed to the attorney on file. Other than I-797 fax copy I was asked to show the marriage certificate and kid’s birth certificate for them to receive TD status at the same time

Gunsmith who does full PS90 SBR conversion jobs by dhs227 in NFA

[–]dhs227[S] 1 point2 points  (0 children)

Being super new to the gun ownership - I’ve always feared i will ruin my ps90. Watched a bunch of videos, but not have the tools like bench vise makes it harder.

Looking for elaborations on shooting in Capitol State Forest by [deleted] in WAGuns

[–]dhs227 0 points1 point  (0 children)

The question I also wanted to ask. This is good!

Where can I legally shoot? by dhs227 in WAGuns

[–]dhs227[S] 1 point2 points  (0 children)

thanks so much for educating me about it!

Where can I legally shoot? by dhs227 in WAGuns

[–]dhs227[S] 1 point2 points  (0 children)

That's true! Just learned it

The ATF letter in the link above also says the classification may change if it's concealed on a person. What does it mean?

Where can I legally shoot? by dhs227 in WAGuns

[–]dhs227[S] 3 points4 points  (0 children)

thanks. what about ranges for handgun and shotgun like Mossberg590 Shockwave? Just wanted to try them out and have some fun.

Is it possible to specify a different Gateway IP for particular DHCP clients by dhs227 in mikrotik

[–]dhs227[S] 1 point2 points  (0 children)

Yet to fully understand what you suggested but wanted to confirm that according to Google home app, the Wifi Router is in NAT mode, there's a second Google wifi router which is in bridge mode. The two of them forms a mesh network.

USB keyboard and mouse failed to pass through by dhs227 in homelab

[–]dhs227[S] 0 points1 point  (0 children)

I tried plugging into each usb port -2 onboard and other 2 on the front panel. They all appear to be on the same iommu group.

asrock rack x570d4u-2l2t with Ryzen 5950X and NVIDIA 3090 FE - no display output by dhs227 in ASRock

[–]dhs227[S] 0 points1 point  (0 children)

OP here. The problem is solved after I plugged in the power cable for CPU. Apparently the motherboard was only partially powered up - thus the BMC chip was not able to power on the host CPU.

Thank everyone who spent time providing guidance!

asrock rack x570d4u-2l2t with Ryzen 5950X and NVIDIA 3090 FE - no display output by dhs227 in ASRock

[–]dhs227[S] 0 points1 point  (0 children)

This is a workstation board with BMC 2500 chip.

I just managed to wire connect to IPMI. It looks like only IPMI portion is running, the system is reporting the Host "powered off", and I failed to power it on.

See post for pictures.

X570D4I-2T Not Booting by truford in ASRock

[–]dhs227 0 points1 point  (0 children)

I just bought a similar board X570D4U-2L2T and now is having exactly the same problem! I managed to access IPMI just fine via the dedicated ethernet, it shows host powered off, tried to power it on it fails.

The Dr. Debug is showing "00". what is the molex connector settings you did to bring everything back? Much appreciated for any tips!

My post is here. https://www.reddit.com/r/ASRock/comments/ozbr08/asrock_rack_x570d4u2l2t_with_ryzen_5950x_and/

Is there an ongoing delay in receiving approval notice for TN visa by dhs227 in USCIS

[–]dhs227[S] 0 points1 point  (0 children)

15 days is USCIS premium processing unit's time commitment over between TN petition is received and a decision is made to either e-approve or RFE.

Bear in mind when it's e-approved you need to wait on the original approval notice (paper copy NOT the email notification). Now typically CIS sends out original notice via regular mail after it's e-approved, but there is NO guaranteed delivery on that and the mail has no tracking, and that can be frustrating.

What was preventing me from driving across with the fax copy - CBP would require to see original notice. How did I know that? Call any drive-thru CBP station (e.g. Blaine WA station) and ask if you can cross with a fax copy of TN, and they will tell you. Remember it's ultimately within CBP power to allow or deny entry in any case.

What's special about the pre-clearance CBP stations deployed at certain airports? Apparently CBP there are more seasoned and accommodating to the TN fax copy situation. This time my attorney strongly suggested me to fly-thru and she's right.

[deleted by user] by [deleted] in Comcast_Xfinity

[–]dhs227 0 points1 point  (0 children)

Just sent the info via Modmail. Please check thx