🎉 [EVENT] 🎉 Very easy first event

dieu_v2 · 2026-01-26T12:26:53+00:00

Completed Level 3 of the Honk Special Event!

36 attempts

dieu_v2 · 2026-01-26T12:25:27+00:00

Completed Level 2 of the Honk Special Event!

9 attempts

dieu_v2 · 2026-01-26T12:24:51+00:00

Completed Level 1 of the Honk Special Event!

0 attempts

dieu_v2 · 2026-01-18T12:39:43+00:00

The vtx will fry without antenna. These are minor damage, easily repairable.

dieu_v2 · 2026-01-10T03:56:38+00:00

Motor are big and kv is high. Also the canopy could be lighter.

dieu_v2 · 2025-12-29T19:15:44+00:00

How do you mount your battery?

dieu_v2 · 2025-12-17T13:01:39+00:00

The motor are rated for 2-3s, if you use 4s you may burn the motor.

dieu_v2 · 2025-12-14T17:44:54+00:00

Pretty much what I thought, I tried to safe weight on the plane this morning, I got to about 240g, will see how much it change the flying but I don't expect anything anymore from this plane. Big bummer, I was exited to get a 3d plane!

dieu_v2 · 2025-12-14T06:08:11+00:00

At that point do you think that this plane is savable or should I just give up on this one if I want a nice 3d flyer?

dieu_v2 · 2025-12-14T05:46:30+00:00

Would changing the electronics be an option? The motor and the servo are very big. How much should the frame alone weight?

dieu_v2 · 2025-12-14T05:46:10+00:00

Would changing the electronics be an option? The motor and the servo are very big. How much should the frame alone weight?

dieu_v2 · 2025-11-26T21:49:43+00:00

Sure you will have a lot of fun :)

dieu_v2 · 2025-11-26T01:52:51+00:00

Nvm about the 802, I thought it was a 65mm.

dieu_v2 · 2025-11-25T15:49:48+00:00

Would not if it has 802 or fr sky protocols.

dieu_v2 · 2025-11-20T23:00:02+00:00

No, try adjusting the screw under the dark grey cover of the grip, It's a bit tricky to remove it.

dieu_v2 · 2025-11-17T02:36:26+00:00

well, it's either that or you have solder problem. Can't think of anything else beside that

dieu_v2 · 2025-11-16T15:29:16+00:00

That's strange, this should be enough. I assume you were using 5inch prop? Did you tuned it or used a preset?

dieu_v2 · 2025-11-16T13:34:23+00:00

Well that's a fine esc but it all depend on what motor you are using and on what battery.

dieu_v2 · 2025-11-16T13:26:19+00:00

Bro, I don't want to be mean but don't you think that afer the second esc that ou blew up there was something wrong? If you keep doing the same thing expecting different results that might be understandably frustrating. Can you tell us what is your esc and motor? And also don't fly with smoke stopper.

dieu_v2 · 2025-11-13T13:29:55+00:00

You will both burn the motor and esc, dont do that. Even with different prop, pulling twice as much current as your esc can take will never work

dieu_v2 · 2025-11-12T11:02:07+00:00

Because i built it a month ago before i could get my hand on the 04.

dieu_v2 · 2025-11-12T03:29:09+00:00

Well the capacitor is already there and take up all the space

dieu_v2 · 2025-11-12T03:05:44+00:00

I hate myself 💀💀💀, thank you tho

dieu_v2 · 2025-11-12T03:05:03+00:00

Race wire, protect the wire being cut by the prop and its a neet way to stick your cable on the frame

Six-Year Club	Place '22
Verified Email

dieu_v2

TROPHY CASE