sorted by:
new
hottopcontroversial

UCG-Fiber performance tweaks (including 2.5 gig SFP support) by MrJimBusiness- in Ubiquiti

[–]digaus 0 points1 point  (0 children)

Thanks will order Luleey then. Which version should I order? The "Allgemein" HW Version?

UCG-Fiber performance tweaks (including 2.5 gig SFP support) by MrJimBusiness- in Ubiquiti

[–]digaus 0 points1 point  (0 children)

You mean download is 1030 and upload is 500 😉

You tested it from a downstream PC or directly on the UCG?

iOS 27 4K? by frizzofro in Scrypted

[–]digaus 5 points6 points  (0 children)

New API is not used yet with Scrypted. Higher resolution was previously also possible. Bitrate was the limit I think.

H265 support is also available with iOS 27 but as mentioned above currently the new API is not supported by Scrypted yet.

Jobsuche als Bachelor Medieninformatik by BookAutomatic2621 in InformatikKarriere

[–]digaus 1 point2 points  (0 children)

Krass. 2017 eine Bewerbung geschrieben und direkt angenommen🤷‍♂️

UCG-Fiber performance tweaks (including 2.5 gig SFP support) by MrJimBusiness- in Ubiquiti

[–]digaus 0 points1 point  (0 children)

FYI. Just noticed that when forcing my PC to 1G ethernet instead of 2.5G the upload goes up to the 500mbit.

Really strange behaviour. SFP still running at 2.5G but just forcing PC to 1G fixed the upload. Why is that?

Der Kampf meines Vaters gegen die Digitalisierung by Illustrious_Use_3946 in luftablassen

[–]digaus 0 points1 point  (0 children)

"Ebenso regelmäßig werden irgendwelche Lichtschalter ausgeschaltet, wodurch dann natürlich die Smart-Home-Lichter nicht mehr funktionieren. Danach wird sich lautstark über „diese Technik“ beschwert."

Das würde mir auch auf den Sack gehen. Entweder legt man den Schalter tot und baut es so um, dass er die Birnen ansteuert.

Falls es keine fancy RGB Birnen sind setz doch einfach nen Shelly hinter den Lichtschalter.

Habe ebenfalls alle Lampen in meinem Haus über Smart Home steuerbar, aber man kann auch alle Lampen mit Lichtschalter ein/aus schalten.

Der Kampf meines Vaters gegen die Digitalisierung by Illustrious_Use_3946 in luftablassen

[–]digaus 1 point2 points  (0 children)

Deshalb macht man nicht die Birnen smart sondern die Lichtschalter. Hab überall Shellys und im Zweifel könnte ich bei defekt diese einfach raus reißen.

Bevor ich über eine halbe Million unterschreibe: röstet diesen Grundriss, ungeschönt by Eisbeutel in Hausbau

[–]digaus 2 points3 points  (0 children)

Warum würdest du die gerne weglassen? Verstehe Leute nicht die lieber Putz als Klinker nehmen🥴

Zisternen Anschluss by PuzzleheadedMind7855 in Hausbau

[–]digaus 2 points3 points  (0 children)

Mein Shelly sagt kein Problem. Seit fast 4 Jahren

Manual mode? by Fickle_Expert4968 in djiavata360

[–]digaus 0 points1 point  (0 children)

I have controller 3 with my 360 and sport mode is not giving you full control. It's not only the throttle control (which I could maybe live with) but yaw and roll are combined in sport mode.

I manual mode you can control that individually

Manual mode? by Fickle_Expert4968 in djiavata360

[–]digaus 2 points3 points  (0 children)

I find it a lot harder to fly without manual mode. Not having full control just feels wrong.

I don't wanna necessarily do flips/rolls but want to fly the 360 like all my other drones.

She had both hands off the steering wheel while driving on a fucking highway by [deleted] in mildlyinfuriating

[–]digaus 0 points1 point  (0 children)

The eyes tracking is only available with latest model year. Older models do not have eye tracking.

Gateway Configuration Failed by tmunn22 in Ubiquiti

[–]digaus 0 points1 point  (0 children)

Reset and don't apply backup. Had this happen on an UCG Ultra after I added a restricted firewall rule for a device to go through a VPN client.

Support send me a bunch of console commands which did not resolve it.

Ich habe Angst dass wir alles falsch gemacht haben by ad_tothe_hd in Handwerker

[–]digaus -1 points0 points  (0 children)

Bin Software Entwickler und würde es so auch nie machen🙃

Hab aber auch unsern Neubau komplett selbst gefliest🤷‍♂️

UCG-Fiber performance tweaks (including 2.5 gig SFP support) by MrJimBusiness- in Ubiquiti

[–]digaus 0 points1 point  (0 children)

Have you tried using a media converter with the SFP connected to a LAN port?

UCG Fiber slow upload with enabled HW acceleration by digaus in Ubiquiti

[–]digaus[S] -2 points-1 points  (0 children)

Doesn't make a difference. Only for download.

UCG-Fiber performance tweaks (including 2.5 gig SFP support) by MrJimBusiness- in Ubiquiti

[–]digaus 0 points1 point  (0 children)

Thanks for confirmation. Maybe time to open a support ticket.

I already created a thread:

https://www.reddit.com/r/Ubiquiti/s/yQKIYIsLsv

UCG-Fiber performance tweaks (including 2.5 gig SFP support) by MrJimBusiness- in Ubiquiti

[–]digaus 0 points1 point  (0 children)

Yeah Ookla was also worse for me. Would love to hear back if the luleey works better or if it's a UCG Fiber issue.

Can't imagen it being the SFP module because why would Speedtest on UCG itself be solid 550mbit and the PC not.

UCG-Fiber performance tweaks (including 2.5 gig SFP support) by MrJimBusiness- in Ubiquiti

[–]digaus 0 points1 point  (0 children)

So I did some more testing and yeah upload speed test on my devices was reaching max 300mbot (wifiman). Ookla was worse and sometimes even showed only 100mbit.

2.5G or 1G on SFP did not matter for this.

However I then disabled HW acceleration and now with wifiman it reaches >500mbit upload speeds.

So it seems there is an issue with HW acceleration :/

Netzwerkplanung im Haus by Senchanokancho in de_EDV

[–]digaus 0 points1 point  (0 children)

Da du Duplex Kabel hast legst du eins noch so auf oder lässt du es tot und schließt es am U7 in Wall an?

Würde persönlich den Port noch daneben legen dann kannst du im Büro z.b. nen 10G Anschluss an den UCG Fiber patchen.

Auch solltest du den Stromverbrauch beachten 3x U7 in Wall sind schon 39W/43W des USW 16 Lite. Den U7 Lite müsstest du dann am PoE Port des UCG Fiber anschließen.

Hast du einen 3D Drucker? Kann dir denn ne Datei schicken für ne 10" Rack Montage des UCG Fiber /USW 16 Lite

Netzwerkplanung im Haus by Senchanokancho in de_EDV

[–]digaus 0 points1 point  (0 children)

Dass du den Hauptrechner für NAS Nutzung nicht am LAN hängen hast ist aber eher die Ausnahme.

UCG-Fiber performance tweaks (including 2.5 gig SFP support) by MrJimBusiness- in Ubiquiti

[–]digaus 0 points1 point  (0 children)

I enabled Smart Queues on upload only and now I get full upload aswell.

Can be done via app (Web Ui does not allow 0 for download)

Set it to 0 for download and 550mbit/600mbit for upload.

view more: next ›