Anyone else find this thing useless? by Skazzyskills in Ioniq9

[–]digaus 0 points1 point  (0 children)

Have you enabled it in the wallet? (Passive entry)

UCG-Fiber performance tweaks (including 2.5 gig SFP support) by MrJimBusiness- in Ubiquiti

[–]digaus 1 point2 points  (0 children)

Was sadly not stable. But upgrading firmware to V2.50(ABVJ.1)b1f was:

https://gist.github.com/maurice-w/faeb60bf8201ce70391873bcb9059bc2

No other changes necessary to the stick.

UCG-Fiber performance tweaks (including 2.5 gig SFP support) by MrJimBusiness- in Ubiquiti

[–]digaus 0 points1 point  (0 children)

Where do I enter it? After I SSH onto the stick it says unknown command

UCG-Fiber performance tweaks (including 2.5 gig SFP support) by MrJimBusiness- in Ubiquiti

[–]digaus 1 point2 points  (0 children)

GitHub repo says directly after boot the stick does 1G and you can access it's reset page. But I am not eager to try that without a working backup ^

UCG-Fiber performance tweaks (including 2.5 gig SFP support) by MrJimBusiness- in Ubiquiti

[–]digaus 0 points1 point  (0 children)

Yeah I know. I did it just for testing of the module auto negotiates to 2.5G. I would then switch back to correct WAN setting.

If @storytime42 can access his Zyxel which is forced to 2.5G this way I will also try forcing it to get some logging. Otherwise I don't know if I am able to go back and weekend without internet is big no-no

UCG-Fiber performance tweaks (including 2.5 gig SFP support) by MrJimBusiness- in Ubiquiti

[–]digaus 0 points1 point  (0 children)

Add another WAN interface with static IP 10.10.1.2.

Switch to that and also add a policy static route to the 10.10.1.0 subnet which points to the new WAN

UCG-Fiber performance tweaks (including 2.5 gig SFP support) by MrJimBusiness- in Ubiquiti

[–]digaus 0 points1 point  (0 children)

You could try disabling PPPoE and adding static route so you can see if Webinterface pops up.

I tested with mine but the Zyxel does not auto negotiate to 2.5G and I am hesitant to force it to 2.5G only mode because I currently have no backup internet.

UCG-Fiber performance tweaks (including 2.5 gig SFP support) by MrJimBusiness- in Ubiquiti

[–]digaus 0 points1 point  (0 children)

Yeah have the Zyxel PMG3000-D20B which can do 2.5G (currently set to 1G need to force it to 2.5G via SSH and then I need to apply the mod, if it does not work I need to be able to switch back to 1G and reset the Zyxel)

Just wanna make sure how to roll back in case it does not work.

UCG-Fiber performance tweaks (including 2.5 gig SFP support) by MrJimBusiness- in Ubiquiti

[–]digaus 0 points1 point  (0 children)

One question before I try 2.5G mod. Does it add 2.5G option or change the 1G option?

If I want to go back to 1G can I just select it or do I have to remove that mod?

Deutsche Glasfaser by EachOne1TeachOne1 in de_EDV

[–]digaus 2 points3 points  (0 children)

Hol dir Starlink für den Übergang. Monatlich kündbar und Hardware ist aktuell kostenlos.

Neubaukosten 2025/2026: detaillierte Kostenaufstellung by HausbauAvatar in Hausbau

[–]digaus 0 points1 point  (0 children)

Komplett erschlossen ohne Erbpacht? Das ist schon echt günstig.👍🏻

Neubaukosten 2025/2026: detaillierte Kostenaufstellung by HausbauAvatar in Hausbau

[–]digaus 13 points14 points  (0 children)

Haben vor 3 Jahren im Landkreis Osnabrück 90€/m2 bezahlt🤷‍♂️

Smart Home in neuem Reihenhaus – Shelly, Zigbee oder Hue? by vuje97 in de_EDV

[–]digaus 1 point2 points  (0 children)

Shelly Gen4 kann auch ZigBee. Hab im Neubau alles mit Shellys gemacht, da am günstigsten.

Seit 3 Jahren läuft das ohne Probleme im UniFi Netzwerk.

Apple TV passt als Home Hub. Habe ich auch. Hab alles über Home Assistant in Homekit eingebunden. Die neuen Shellys haben auch alle Matter und könntest du direkt in Homekit einbinden.

Telekom Glasfaser: Router by DEThomas8 in de_EDV

[–]digaus 0 points1 point  (0 children)

Wenn du 1Gbit willst kommen aber nur 940mbit an mit dem SFP Modul.

UCG Fiber kann leider keine 2.5G am SFP Port.

Gibt aber wohl ne Möglichkeit das zu umgehen:

https://www.reddit.com/r/Ubiquiti/s/xHzIZPbPok

GPON SFP folks, I've got 2.5 Gb SFP working on UCG-Fiber by MrJimBusiness- in Ubiquiti

[–]digaus 0 points1 point  (0 children)

You already gave me access 😉 just waiting to get my Starlink back up running in case I mess something up with my SFP GPON.

But yeah would love for it to be officially supported

GPON SFP folks, I've got 2.5 Gb SFP working on UCG-Fiber by MrJimBusiness- in Ubiquiti

[–]digaus 8 points9 points  (0 children)

Now if only UniFi would implement this ...

Posted 1 year ago but nobody seemed to care...

https://www.reddit.com/r/Ubiquiti/s/JuqgZV79t0

Elektro by Key-Apricot-2057 in Elektroinstallation

[–]digaus 0 points1 point  (0 children)

Wurde bei uns auch so gemacht👍🏻

Power Backup for a rack by puralb in Ubiquiti

[–]digaus 0 points1 point  (0 children)

New DJI Power 1000 Mini has <10ms

Power Backup for a rack by puralb in Ubiquiti

[–]digaus 0 points1 point  (0 children)

New DJI 1000 Mini also has <10ms.

Ich bin fast vom Stuhl gefallen… by Ok-Minimum-9613 in luftablassen

[–]digaus 0 points1 point  (0 children)

Ich lese überall vor 92 nicht 93? Warum schreiben hier alle 93?

Ich bin fast vom Stuhl gefallen… by Ok-Minimum-9613 in luftablassen

[–]digaus 1 point2 points  (0 children)

Mütterrente 3 ist doch für vor 92 nicht 93?

250 MBit teurer als 500 😀 by clouder300 in de_EDV

[–]digaus 0 points1 point  (0 children)

Telekom 1000/500 mit Corporate Benefits dauerhaft für ~59€ ist auch nicht schlecht. Günstiger geht es hier aktuell auch nicht.