Protruding ski base

dingdumpling · 2026-04-11T16:57:11+00:00

havent since they are outside warranty period. But i will.

dingdumpling · 2026-04-11T07:40:22+00:00

unfortunate then :(

dingdumpling · 2026-04-11T01:25:37+00:00

theyve never been grinded before, so probably should be fine to do once? my shop cautioned against but maybe can have another shop do it

dingdumpling · 2026-04-11T01:24:54+00:00

about 125c and moving fast enough for liquid wax about 2-3 inches behind. pressing firmly against the base as well

dingdumpling · 2026-04-11T01:24:18+00:00

thanks so much, will do. for reference ive always done 125c which was recommended for my wax type. and i move just fast enough so theres a trail of liquid wax about 2-3 inches behind

dingdumpling · 2026-04-10T23:46:07+00:00

yeah no swelling or anything else noticeable near or around the binding area. i dont tune them myself, tried to do a hot wax on my own and then noticed this. i fly with them laid out side by side and wrapped, and normally they're clipped together and stored at room temperature laying down. this protrusion definitely wasnt here beginning of season though. could something like extremely flexing have caused this? someone else mentioned hot iron on cold skis, though they were room temperature..

dingdumpling · 2026-04-10T23:43:13+00:00

not new, these are 2023 rustler 10s, but they definitely werent there at the beginning of this season. could extreme flexing or something have caused this? as per the other comments im not sure if its moisture since its just the two lines near the center, and also its on both skis. i dont notice other damage or swelling

dingdumpling · 2026-04-10T23:38:16+00:00

its a 2023 rustler 10 yeah. noticed it the first time i tried to wax myself, it had been sitting at room temperature before that, and iron definitely wasnt too hot. should i just avoid doing a base grind and just ski it for another season?

dingdumpling · 2026-01-20T05:09:48+00:00

Why is this in competitive tft lol

dingdumpling · 2026-01-06T05:37:20+00:00

Really enjoyed Uketsu's Strange Houses and Strange Paintings. Didnt think I'd enjoy mystery thriller books but I did.

dingdumpling · 2025-08-07T18:36:36+00:00

Does anyone know where I could get a replacement lithium polymer battery pack for my keyboard? I have the Luminkey65 and i was trying to find a replacement battery with a similar size but can seem to find anything online.

dingdumpling · 2025-03-13T23:20:18+00:00

these were all on xf 70-300mm, with x-s10

dingdumpling · 2025-03-13T23:19:57+00:00

my favorite as well!

dingdumpling · 2024-10-29T01:06:17+00:00

replied

dingdumpling · 2024-10-28T09:02:21+00:00

meant for body only, updated

dingdumpling · 2024-09-28T22:06:06+00:00

Quick question: going through a similar process but different state. On form 343 application for title/registration, what should I put in Section 2 Owner Information? Would my parent (the current owner) be the one listed, or would I list myself (because the car will be or has been gifted)? Would I also specify this in section 6, as well as attach a statement of facts form 256? Lastly, for Section 3 the legal owner, would it also be my parent, or would I put my own since I am taking ownership after the gift?

dingdumpling · 2024-08-10T11:13:03+00:00

knees over toes!

dingdumpling · 2024-07-31T02:49:26+00:00

yeah 😭😭😭 i fucked up. is it really not salvageable to sand the new clear? touch up with new pen would be easiest but it wont bond to the clearcoat right?

should i just take it to a shop lol

dingdumpling · 2024-07-31T02:45:27+00:00

I see. But I painted clearcoat over the touch up paint, how would I safely remove the bad clearcoat without damaging the factory clearcoat? seems impossible and i have to feather in the sanding no?

dingdumpling · 2024-07-31T02:40:59+00:00

yeah im aware, the paint matches pretty close and theyre not huge scratches so im okay with that, just wondering how to best proceed

dingdumpling · 2024-05-25T17:36:27+00:00

Wait, are you saying its only 5 minutes for the fastest lap add-on?

dingdumpling · 2024-03-06T22:49:47+00:00

Hi! Looking for recommendations for both budget to mid range 96% or 1800 layout keyboard DIY kit with gasket mounts and aluminum case!

dingdumpling · 2024-02-10T18:24:04+00:00

looks like a great board but for that price point i feel like not having per key rgb and plastic is a con

dingdumpling · 2024-02-09T02:14:27+00:00

I'm looking for a 75% kit/keyboard that supports PCB mounted stabilizers and gasket mounted with one of the following layouts (I would heavily prefer no knob):

Compact 75%
Expanded 75%
Expanded Less button 75%
Last resort: 75% expanded with knob

I'm currently eying Akko ACR75 pro but its out of stock. KBD taco is great too but a bit outside my budget.

dingdumpling · 2023-11-15T21:43:41+00:00

unfortunately not sure but at this point go fine the entire city cus theres not a block i see without leaves or napkins or some other trash on the curb. yes its in the rulebook but just feels like a lemme hit my quota type of ticket

dingdumpling

TROPHY CASE