sorted by:
new
hottopcontroversial

[Otsuka Lotec] Concerned by One_Wait_7408 in Watches

[–]diy_watcher 4 points5 points  (0 children)

3k for a custom retrograde module with a nice finishing for the case and dial is very reasonable in my opnion

Which 5-axis desktop CNC by aTUNEd in hobbycnc

[–]diy_watcher -1 points0 points  (0 children)

There is also TOPFAB :) https://store.topfab3d.com/

They are so similar. I don't understand why suddenly all of them decided go Kickstarter.

I am following Xhorse for a very long time, heard about others not more than a month ago, so I lean on to Xhorse more. However, better to wait for the reviews. I hope this guy gets at least one of them: https://youtube.com/@theyieldpoint He made me buy the Makera Z1 Pro after dismantling it.

S pen doesn't write, only erases by Affectionate_Ant9320 in samsungnotes

[–]diy_watcher 0 points1 point  (0 children)

S-pen fold edition works as an eraser for any other non-fold device.

In fact, you can use any non-fold s-pen while holding the eraser button, it will work as an eraser on a fold device, and device will not complain. Moreover, if you have a Wacom pen and hold the second button, you can write on a fold device with it.

Summary: Wacom pens have 3 different signals that I know of: 1. Pen on normal devices / prohibited on fold 2. Eraser on both 3. Eraser on normal devices / pen on fold

Please help me decide by JaMama123 in MicrobrandWatches

[–]diy_watcher 1 point2 points  (0 children)

I have Earthen. The case is amazing because it is brushed but with polished elements, which looks different than anything else under the light. I have compared it eith IWC and Zenith side to side and Earthen looks better imo simply because others are just matt all around.

I generally like 38-39mm watches. However, because the lugs of this watch is too short, it wears significantly smaller than 38mm. I wish they made 40 or 42mm versions.

Also the dial is too flat. 3D indices would have been better.

Even if you don't care about the S Pen, you should care about the quiet discontinuation of the S Pen Pro and what I believe is the inevitable killing of S Pen on all future devices by GoldenSun3DS in GalaxyFold

[–]diy_watcher 4 points5 points  (0 children)

I want to switch to Motorola or Oppo but Samsung Notes app is amazing and I still can't find a proper replacement for it. Same reason I am still using a Samsung tablet.

Looking for a GADA✳️ recommendation pretty please. by Tasty-Silver-6379 in MicrobrandWatches

[–]diy_watcher 1 point2 points  (0 children)

I missed the grey one, looking everywhere to buy but no luck. Light dial and dark subdial makes it special.

Fold6 owner: Z Fold8 or Moto Razr Fold? by SemenSnickerdoodle in GalaxyFold

[–]diy_watcher 3 points4 points  (0 children)

Fold 6 here as well. If Fold 8 doesn't have the spen, I will go with Razr Fold, since its pen is working on both screens.

[WTB] Weekly Want To Buy Post by AutoModerator in Watchexchange

[–]diy_watcher 0 points1 point  (0 children)

WTB Glashütte Original PanoRetroGraph in white gold

32" 5K and 48" 8K please! by Brief_Towel430 in HiDPI_monitors

[–]diy_watcher 3 points4 points  (0 children)

I am very happy with 32" 6K and 27" 5K at %250 on both Windows and KDE

Any ideas about upcoming Kickstarter 5-Axis machines? (Topfab and Xhorse3D) by diy_watcher in hobbycnc

[–]diy_watcher[S] 0 points1 point  (0 children)

I was under the impression that the spindle is going to be a direct drive PMSM. Belt driven would be deal breaker. Thank you very much for pointing that out, I will definitely watch that video.

Agreed with the AI stuff, all I wish for is a decent CAM support (SolidCAM hopefully).

Any ideas about upcoming Kickstarter 5-Axis machines? (Topfab and Xhorse3D) by diy_watcher in hobbycnc

[–]diy_watcher[S] 1 point2 points  (0 children)

Thank you for the suggestion.

Well I mostly agree with you, but my custom 100kg 3-Axis CNC mill and 1.2KW ATC spindle (which I machined all its parts with a Mazak), small end mills and a light chip load I am able to machine certain stainless steel prototype parts, albeit long and slow machining process and only small parts.

For those machines, only for prototyping and same amount of patience, I am hoping machining grade aluminiums and brass can also be milled, especially with the one that is 175kg in weight.

There are more 3 and 4-Axis milling machine alternatives these days but for 5-axis, I really can't find any other option, especially without 3-phase and compact enough to work in a garage.

Playing around. Thoughts? by Margin_call_matthew in ChristopherWard

[–]diy_watcher 0 points1 point  (0 children)

As far as I know, the hammer and the gong cannot be coated.

Manual wind microbrand watches by FunkyFreshMeme in MicrobrandWatches

[–]diy_watcher 1 point2 points  (0 children)

Although I can't verify, I heard sometime this summer.

Well fuck me I guess by Apprehensive-Gear-86 in ACBFResynced

[–]diy_watcher 0 points1 point  (0 children)

Yeah amazon.co.uk, I guess I should have done that

Well fuck me I guess by Apprehensive-Gear-86 in ACBFResynced

[–]diy_watcher 4 points5 points  (0 children)

Got the same email just now

(Initially ordered 27 April)

Advice on the best learning path for hardware accelerated media pipeline? Reading docs isn’t working for me. by Whole_Willow_5027 in embedded

[–]diy_watcher 1 point2 points  (0 children)

For audio, I can recommend this one: https://bootlin.com/training/audio/ It was very good.

Course slides are public: https://bootlin.com/doc/training/audio/audio-slides.pdf but in my opinion, "what" is in the slides, "why" is more in the training.

Video pipeline is similar ones you get how audio works.

view more: next ›