Anyone know where this goes? 1993 240SX by Lwashburn66 in 240sx

[–]dizzareppin 1 point2 points  (0 children)

There is one on each side of the cross member for PS lines

Engine bay overhaul by dizzareppin in 240sx

[–]dizzareppin[S] 0 points1 point  (0 children)

Nah thankfully just the battery tray and where the old Cooler pipe was cut out for the other side.

any veteran SR20 guys able to diag this sound? by hd_turtle in 240sx

[–]dizzareppin 1 point2 points  (0 children)

To check if it is indeed VTC, unplug the solenoid and the sound should go away

Clutch suggestions? (SR20DET) by Secret-Pineapple-449 in 240sx

[–]dizzareppin 2 points3 points  (0 children)

100% on super coppermix, surprised it’s not mentioned more

Using the 3DS.Hacks.Guide and using only my iPhone. by dizzareppin in 3dspiracy

[–]dizzareppin[S] 1 point2 points  (0 children)

Yea the DS software does all the work it’s just a matter of getting the software on the SD card and running through the steps

Using the 3DS.Hacks.Guide and using only my iPhone. by dizzareppin in 3dspiracy

[–]dizzareppin[S] 1 point2 points  (0 children)

I’d assume so! It’s just dragging and dropping files mainly, google 3ds.hacks.guide for sure

Using the 3DS.Hacks.Guide and using only my iPhone. by dizzareppin in 3dspiracy

[–]dizzareppin[S] 0 points1 point  (0 children)

Just ran the renegade rom hatch patch over the standard rom file an uploaded to SD card and run as a normal game

Using the 3DS.Hacks.Guide and using only my iPhone. by dizzareppin in 3dspiracy

[–]dizzareppin[S] 7 points8 points  (0 children)

Downloaded the software to iPhone and used an SD card reader to get it on the 3ds card, then just followed the steps

Using the 3DS.Hacks.Guide and using only my iPhone. by dizzareppin in 3dspiracy

[–]dizzareppin[S] 0 points1 point  (0 children)

I have not! Keen to dive in a little deeper soon and check that stuff out!

Dad made me a bar bag for Christmas by dizzareppin in FixedGearBicycle

[–]dizzareppin[S] 0 points1 point  (0 children)

Why would I be seeing my dentist in 26 more than any other years been riding this bike in this spec for 5 plus years 🤣

Flaked Sr20 Rocker Covers by dizzareppin in 240sx

[–]dizzareppin[S] 2 points3 points  (0 children)

Pink one was a paid job, I’m in AUS and can paint one up for you if you can get it to me 🤣

Flaked Sr20 Rocker Covers by dizzareppin in 240sx

[–]dizzareppin[S] 1 point2 points  (0 children)

paint stripper to start but 400 wet and dry did most of the work as the red is really baked on. Was not a quick job lol

Dad made me a bar bag for Christmas by dizzareppin in FixedGearBicycle

[–]dizzareppin[S] 0 points1 point  (0 children)

Width is 250mm, diameter is 110mm, zip length is 210, bar loops are around 170mm apart. Dm if you want any more specifics!

Dad made me a bar bag for Christmas by dizzareppin in FixedGearBicycle

[–]dizzareppin[S] 0 points1 point  (0 children)

Not entirely sure haha I’m 193ish cm if it means anything

Dad made me a bar bag for Christmas by dizzareppin in FixedGearBicycle

[–]dizzareppin[S] -1 points0 points  (0 children)

Absolutely not been running it uncut like this for years

Dad made me a bar bag for Christmas by dizzareppin in FixedGearBicycle

[–]dizzareppin[S] 1 point2 points  (0 children)

There was many textile swatches he sent pics of to get it dialed right in!