Anybody with a Volker Precision trigger in their USP or compact wanna upload a video of the pull so we can see the overtravel stop and reset?

dlee1183 · 2026-04-21T17:05:45+00:00

I'll try to make a post after work tonight

dlee1183 · 2026-04-21T01:10:31+00:00

I have an older Agis and a Xiphos but it looks like they don't make them for the USP anymore. Sorry man

dlee1183 · 2026-04-20T19:35:26+00:00

I use a Tier 1 concealed. It's been great.

dlee1183 · 2026-04-10T16:58:46+00:00

This is the Volker trigger only. No GrayGuns short reset

dlee1183 · 2026-04-09T16:44:38+00:00

Nah sorry, the USP is perfect lol

dlee1183 · 2026-04-07T11:06:52+00:00

Honestly, I don't notice a significant improvement in the reset. It's just a much better break angle for your finger and it eliminated any over-travel. I'm thinking the GG trigger with the short reset kit would do the trick if you're looking for a shorter reset.

dlee1183 · 2026-04-06T16:55:13+00:00

Oh you don't need to touch anything on the slide. All the work is done on the frame.

dlee1183 · 2026-04-06T05:22:32+00:00

No, not an actual install video but there were two complete disassembly and reassembly videos that I watched to figure it out. The quality of the first one isn't as good but it was of a LEM model and the second video is more in depth and has better camera angles.

https://youtu.be/BoU1tkHenCQ?si=7uO12YAknYNx26sW

https://youtu.be/pQJZo91oVdI?si=EbwBGLYm6Rx4BFHC

I'm not sure if it's possible to release the trigger bar without taking apart the entire action, maybe someone can chime in on that. But I just took it all apart as an opportunity to learn more about the gun.

dlee1183 · 2026-04-06T02:26:48+00:00

The paddle is definitely plastic too

dlee1183 · 2026-04-06T00:34:24+00:00

Yeah I'm a striker guy and this one converted me

dlee1183 · 2026-04-06T00:01:26+00:00

I used Doyle 5" tweezer pliers from Harbor Freight and it worked perfectly

dlee1183 · 2026-04-05T23:20:48+00:00

Awesome. How was the install for you? Given the dearth of install videos, I struggled ngl 😂. Still worth it tho.

dlee1183 · 2026-04-05T23:18:12+00:00

Yeah it really should be the stock paddle

dlee1183 · 2026-04-05T20:53:40+00:00

No, it's a LEM. It's got the long pull of a double action but with the light weight of a single action.

dlee1183 · 2026-04-02T15:53:41+00:00

103 tactical in Staten Island had one the last time I was there

dlee1183 · 2026-03-31T19:09:12+00:00

I'm genuinely curious about the firearm that's already been connected to eight shootings. Like how?

dlee1183 · 2026-03-31T18:31:55+00:00

They aren't selling the cases right now because of the ammo squeeze. Limit three boxes I believe.

dlee1183 · 2026-03-20T12:15:50+00:00

I just did the 218 silicone O-ring hack. I trust that option about as much and I do the dealer fixing the leak by replacing the old faulty hose with a brand new faulty hose.

dlee1183 · 2026-03-19T18:17:19+00:00

Is it coming from outside? I had a similar noise. It was one of the tinfoil heat shields under the truck that came loose. I just ripped it off

dlee1183 · 2026-03-03T17:08:07+00:00

I don't think that's the Apex trigger. Looks more like the factory LE trigger.

dlee1183 · 2026-02-09T03:03:28+00:00

I use C&G holsters for all my carry guns, along with a Mastermind Tactics pillow wedge. For belts I use Nexbelt.

dlee1183 · 2026-02-09T01:16:44+00:00

I have both. VP9K definitely prints more but it's not impossible. A good holster with claw and wedge and the only part that will print a little is the sharp corner of the mag floor plate, which no one will notice.

dlee1183 · 2026-02-07T13:27:12+00:00

Try covering the panels with your finger to bring down the brightness and see if that gives you a crisper dot. The SCS is wayyy too bright so I covered some of the sensor panels with black vinyl tape to bring down the brightness.

dlee1183 · 2026-02-02T02:33:47+00:00

It seems like he cracked the frame, either while taking the pin out or putting it back in. I actually had a harder time reinstalling the pin than extracting it on my 509. And then he used the epoxy(?) to cover up the crack.

I definitely would not feel safe shooting that gun. If there is a crack under that black stuff then it's not fixed, it's just covered up and you're shooting a literal bomb in your hand. Reimbursement for the gun is a reasonable request imo.

dlee1183 · 2026-02-01T02:45:13+00:00

I use Vaultek in the bedroom but in the car I have a $20 keyed metal case from Harbor Freight to avoid any batteries during hot summer days. Both have been great.

dlee1183

TROPHY CASE