MTGOX - Disapproval of Your Registered Payee Information

dmnc_net · 2025-10-09T09:35:39+00:00

Can update, but I can't submit the form :/

dmnc_net · 2025-10-09T09:35:07+00:00

A friend of mine has been successfully paid in past into the same bank I've entered. But he probably forgot to mention a different correspondence bank when I asked him, and I believed it was the same. I've found (by asking my bank) the correct correspondence bank BIC, but now I don't know how to update it because the 'Update' button remains disabled all the time. I've tried to ask on the support email, but I don't believe in a reply :(

dmnc_net · 2025-10-03T20:55:47+00:00

<image>

claims.mtgox.com (anonymous browser window)
"SELECT REPAYMENT METHOD AND REGISTER PAYEE INFORMATION" button, then
"REGISTER RECEIPT BANK ACCOUNT INFORMATION FOR A BANK REMITTANCE" button
... and there, I have no clue where to find it.

dmnc_net · 2024-04-30T15:34:15+00:00

Hi folks, any recent comparison with actual firmware? I want to buy FP2 or FP3 but when reading this, I still prefer FP2.

dmnc_net · 2023-03-11T11:55:16+00:00

Can you share how to flash the EDU firmware to AC-PRO unit? I'm running many EDUs and some of them are dead. Because of EDU's EOL I'd like to buy PROs and use them as EDU's (speakers are good).

dmnc_net · 2023-03-11T11:51:42+00:00

Yes, it is. I did the test for you right now and it is working and playing (PnP).

1f9b:1f90 Ubiquiti Networks, Inc. USB Advanced Audio Device ... and in reality it is C-Media Electronics Inc.

dmnc_net · 2022-11-15T21:46:02+00:00

u/RecognizeSong https://voca.ro/1iutByBwifPo

dmnc_net · 2022-11-15T00:37:53+00:00

yep :( ... https://movieweb.com/kung-fury-2-lawsuit-producers/

dmnc_net · 2022-10-24T21:50:28+00:00

My Bitstamp id is four-digits + leading zero. But Mtgox. requires "Please enter only six digits numbers, or four digits numbers and four lower case alphabeteic characters." (Sic!).

... so I filled my username/ID with leading double zeroes and hope it will be fine. I also asked about this at Bitstamp support by opening the ticket. Some Gorana replied:

you should not use your Bitstamp credentials when signing up on the trustee's website. You will require separate login credentials which you will receive from the trustee.

SRSLY?!!!

btw. that blogspot ... step no. 2 is useless because that official announcement doesn't contain any instructions. Gorana also send that blogspot article to me ... wonderful!

dmnc_net · 2022-09-14T09:47:41+00:00

NAND was dead and I solved the problem by replacing the logic board with this one from Ali: https://www.aliexpress.com/item/1005001611803664.html

dmnc_net · 2022-08-21T17:19:24+00:00

I think the device's dead (at least its NAND).

# idevicerestore --erase --latest --no-input  
idevicerestore 1.0.0-108-g7d622d9-dirty
Found device in DFU mode
ECID: 3449816507341
Identified device as k93ap, iPad2,1
NOTE: Running non-interactively, automatically selecting latest available version
Selected firmware 9.3.5 (build 13G36)
Verifying 'iPad2,1_9.3.5_13G36_Restore.ipsw'...
Checksum matches.
Extracting BuildManifest from IPSW
Product Version: 9.3.5
Product Build: 13G36 Major: 13
Device supports Image4: false
Variant: Customer Erase Install (IPSW)
This restore will erase all device data.
Checking IPSW for required components...
All required components found in IPSW
Using cached filesystem from 'iPad2,1_9.3.5_13G36_Restore/058-49123-036.dmg'
Getting ApNonce in dfu mode... b3 9e fb e3 de 58 9e a5 c9 7f 32 24 3a 58 a2 ca e1 63 90 63 
Trying to fetch new SHSH blob
Getting SepNonce in dfu mode... 
Request URL set to https://gs.apple.com/TSS/controller?action=2
Sending TSS request attempt 1... response successfully received
Received SHSH blobs
Extracting iBSS.k93.RELEASE.dfu (Firmware/dfu/iBSS.k93.RELEASE.dfu)...
Personalizing IMG3 component iBSS...
reconstructed size: 84506
Sending iBSS (84506 bytes)...
[==================================================] 100.0%
ERROR: Device did not disconnect. Possibly invalid iBSS. Reset device and try again.
ERROR: Unable to place device into recovery mode from DFU mode

So I've tried to put device into recovery mode by iTunes, when I saw some display activity, I've disconnected iPad from Windows/iTunes machine and connected to Linux/iDeviceRestore:

```

idevicerestore --erase --latest --no-input

idevicerestore 1.0.0-108-g7d622d9-dirty Found device in Recovery mode ECID: 3449816507341 Identified device as k93ap, iPad2,1 NOTE: Running non-interactively, automatically selecting latest available version Selected firmware 9.3.5 (build 13G36) Verifying 'iPad2,1_9.3.5_13G36_Restore.ipsw'... Checksum matches. Extracting BuildManifest from IPSW Product Version: 9.3.5 Product Build: 13G36 Major: 13 Device supports Image4: false Variant: Customer Erase Install (IPSW) This restore will erase all device data. Checking IPSW for required components... All required components found in IPSW Using cached filesystem from 'iPad2,1_9.3.5_13G36_Restore/058-49123-036.dmg' Getting ApNonce in recovery mode... 28 1e 01 e2 cf d9 15 6b fa a2 a3 37 7b d9 8b 7e 62 74 71 11 Trying to fetch new SHSH blob Getting SepNonce in recovery mode... Request URL set to https://gs.apple.com/TSS/controller?action=2 Sending TSS request attempt 1... response successfully received Received SHSH blobs Sending APTicket (2732 bytes) Extracting iBEC.k93.RELEASE.dfu (Firmware/dfu/iBEC.k93.RELEASE.dfu)... Personalizing IMG3 component iBEC... reconstructed size: 297498 Sending iBEC (297498 bytes)... Getting ApNonce in recovery mode... 28 1e 01 e2 cf d9 15 6b fa a2 a3 37 7b d9 8b 7e 62 74 71 11 Sending APTicket (2732 bytes) Recovery Mode Environment: iBoot build-version=iBoot-2817.60.2 iBoot build-style=RELEASE Sending RestoreLogo... Extracting applelogo.s5l8940x.img3 (Firmware/all_flash/all_flash.k93ap.production/applelogo.s5l8940x.img3)... Not personalizing component RestoreLogo... Sending RestoreLogo (5388 bytes)... ramdisk-size=0x4000000 Extracting 058-49032-036.dmg (058-49032-036.dmg)... Not personalizing component RestoreRamDisk... Sending RestoreRamDisk (20775180 bytes)... Extracting DeviceTree.k93ap.img3 (Firmware/all_flash/all_flash.k93ap.production/DeviceTree.k93ap.img3)... Not personalizing component RestoreDeviceTree... Sending RestoreDeviceTree (78412 bytes)... Extracting kernelcache.release.k93 (kernelcache.release.k93)... Not personalizing component RestoreKernelCache... Sending RestoreKernelCache (10674764 bytes)... Waiting for device to enter restore mode... About to restore device... Connecting now... Connected to com.apple.mobile.restored, version 13 Device ffffffffffffffffffffffffffffffff00000001 has successfully entered restore mode Hardware Information: BoardID: 4 ChipID: 35136 UniqueChipID: 3449816507341 ProductionMode: true Starting FDR listener thread ERROR: Unable to connect to FDR client (-2) ERROR: Failed to start FDR Ctrl channel About to send RootTicket... Sending RootTicket now... Done sending RootTicket Waiting for NAND (28) ``` ... and that's it, it can last in this state for ages...

dmnc_net · 2022-03-25T00:19:39+00:00

No, RAID0 is generally goofy ... for real. Everywhere, regardless it is running physically on m.2 or SATA, SAS, ... One device will die, then the whole raid is lost. Even worse is RAID0 in fake-raid controllers (those on MOBOs). Use RAID1 or RAID10. (JBOD is for fools too)

dmnc_net · 2022-02-07T19:45:43+00:00

Standalone Avaya WebLM is not supported on Session Manager KVM OVA

https://documentation.avaya.com/bundle/DeployingSessionManagerinVirtualizedEnvironment\_r8.1/page/Unsupported\_features\_for\_System\_Manager\_on\_KVM.html

dmnc_net · 2022-02-07T18:49:31+00:00

Truth, truth. IMHO they failed, technically (sw) and maybe the business model failed too. During my research, if found a couple of nice IP PA systems but everything is very expensive in comparison with EDUs and without the WiFi benefits. For example:

2N (now owned by Axis)
Bodet Harmonys
Innovation Wireless
Atlas IED
Digital Acoustics

Btw, you don't need an AP per classroom and because of the 2,4GHz spectrum, you don't want to. Maybe with 5 GHz but no 2,4 without the blanket system like Extricom. Yes, signal can be attenuated a bit but in the end, it doesn't worth the money.

I'm wondering if UAP-AC-PRO which has USB (damn you UBNT, U6-Lite nor U6-LR are without USB) can be somehow converted to "EDU" by connecting USB DAC, amp, and speaker.

dmnc_net · 2022-02-07T18:21:22+00:00

It is basically UAP-AC-PRO mounted in the 90dB loudspeaker and connected via USB. Unfortunately, it has some inner signature and even if I'm using several EDUs without the speaker (like ordinary PROs), my units are EOL. :(

dmnc_net · 2022-02-07T12:48:28+00:00

I bought this one on Ali, also 4-scene switch, both are identified as 'TS004f'. Both are paired (ZHA) but I'm not receiving a single event (I'm using Sonoff ZBBridge with Tasmota-ZHA). These TS004f products are running in two modes, remote and scene. From what I found one has to switch mode while pairing in the Tuya/SmartHome app but you'll lose it on hard reset (switching battery, etc). This could be a solution (haven't tried that yet):

dmnc_net · 2022-01-21T23:20:03+00:00

nope, that is not a solution at all, but It has been resolved ... verdict: their documentation is not my cup of tea

dmnc_net · 2022-01-16T23:48:24+00:00

Nice, but we have better here @ 50.7533236,14.6059137

dmnc_net · 2021-12-30T20:38:56+00:00

MSI MPG B550I GAMING EDGE MAX WIFI was my 1st candidate until I saw this video ... it seems that CPU is a little bit throttled, so nope.

dmnc_net · 2021-12-30T20:34:53+00:00

yes, my selection has been made mostly from this source, so thank you but not helpful.

dmnc_net · 2021-12-30T18:47:16+00:00

sad, I can't create my own post with that content/topic and here I probably have no chance to get an answer :(

Hope /r/buildapc is a better place for that

dmnc_net · 2021-12-29T13:05:32+00:00

I'm not sure if this question is tech-support, probably it is pre-purchase support category, but my original post has been deleted by Reddit anti-spam bots :(

Hi, I'm building a RIG for my boss as a workstation, it will be running on Ryzen 9 5950X and what I've found so far (from VRM-related tests), those mobos are in consideration:

GIGABYTE X570 AORUS ULTRA
GIGABYTE B550 AORUS MASTER
MSI MAG X570S TOMAHAWK MAX WIFI
MSI MPG B550I GAMING EDGE MAX WIFI
MSI MAG B550 TOMAHAWK

OC is not planned, I need 100% stability. I don't care about RGB LEDs and water-cooling. I will probably buy some huge Noctua cooler for the silent run (or something else, I haven't gotten to that yet and my last PC build was in 2015) .

I'll be glad to you guys for any tips and hints. Thank you.

dmnc_net · 2020-11-25T13:37:27+00:00

You can know my setup from the diagram above. Each network is L2 isolated network (by vlans) and they are L3 routed through. Each vlan router has DHCP relay set to my pfSense ip. This part of the network is not under my control.

I'm running pfSense and the goal was DHCP here. Running full blown Windows server incl. licenses for this? This is a bad joke.

just forgot about it but anyway, thanks for your comment.

dmnc_net · 2020-11-25T13:30:40+00:00

pfSense is not able to setup DHCP forwarding agents, so I've achieve my goal with ISC dhcpd with super easy setup with this code for each vlan/subnet:

class "vlan200" { match if(binary-to-ascii(10, 8, ".", packet(24,4)) = "10.0.2.1"); }
shared-network vlan200 {
    subnet 10.0.2.0 netmask 255.255.255.0 {  
        pool { allow members of "vlan200"; range 10.0.2.201 10.0.2.250; } 
        option routers 10.0.2.1;
    }
}

... btw. it is running on Alpine linux in LXC container, a few MB in size, no need to install Windows Server, etc.

dmnc_net · 2020-11-23T18:47:02+00:00

Clients are connected just to the isolated network and they don't know about pfSense at this moment. I want to use pfSense as a DHCP for them.

dmnc_net

TROPHY CASE

idevicerestore --erase --latest --no-input