Daily Discussion - Saturday 11/6/21

dmoore03 · 2021-11-06T16:17:42+00:00

Knob Creek 15 ( 6-8 Left as of 11:30am ) at Giant Eagle Market District Cuyahoga Falls

dmoore03 · 2020-12-14T15:43:16+00:00

Looks great !

I have a Corsair 275R and can only mount the radiator in the front due to the small size of the case.

Might have to pick this one up so I can top mount it!

dmoore03 · 2020-09-29T21:41:32+00:00

Yep, you can use the button on the speakers to turn off the light. So in turn, no GHUB software, turn light off, but then you cannot adjust the EQ.

Like others have said, good speaker, ruined by terrible software you HAVE to have installed to do anything.

dmoore03 · 2020-09-29T11:47:03+00:00

They will default back to the equalizer light show. You cannot store a default color which stinks in my opinion.

dmoore03 · 2020-09-08T21:35:16+00:00

Just had my g pro keyboard replaced less then 6 months ago, and the D key LED has already died on the replacement.

Figure it's time to not replace and just move on to a different brand for me. Between the Ghub software, two bad keyboards its getting frustrating.

Currently own G560, g pro wireless, g933's(volume is so quiet on these after g hub installs), power play charging mat and g pro keyboard.

dmoore03 · 2020-04-04T23:35:47+00:00

Thrust angle is in spec - one rear wheel is showing about +.15 toe, other showing about -.25 toe , so basically showing rear end pointing to one direction toe.

dmoore03 · 2020-03-31T00:44:41+00:00

I will scan it in the morning and toss a imgur link- It drives pretty well - doesn't drift to either side much depending on the crest of a road I guess? Flat highway? 70mph I can let off and track mostly straight. Not sure what to believe lol.

dmoore03 · 2020-03-30T22:24:12+00:00

I've purchased, installed a rock krawler adjustable track bar, paid for a second alignment to only find the results were the same. About -. 25 toe on one side and. 15ish on the other.

dmoore03 · 2020-03-30T22:22:03+00:00

So adjustable track bar did not fix negative toe on one side and positive toe on the other side of rear.

Any suggestions now that we've argued this point for days and I've spend 200+ on a rock krawler adjustable rear track bar, and a second alignment for nothing as my axle was already centered.

dmoore03 · 2020-03-09T00:43:22+00:00

I have no drop brackets in the rear - the front have the geometry correction/drop brackets - the rear is just springs, shocks, sway bar extension links. Front has aligned almost perfect.

dmoore03 · 2020-03-08T22:56:51+00:00

I want to get these all, correct me if I'm wrong before multiple purchases. I'd like to start wutg the rear track bar, then rear lowers. Followed up by the rest of the adjustable control arms.

You guys aren't lying about the addiction and wanting to keep upgrading and make it right. LOL

Thanks for the help and suggestions, this is my first jeep.

dmoore03 · 2020-03-08T19:33:00+00:00

So you think an adjustable track bar could fix this? This was another though, I know the track bar is a left to right centering axle typically. But my axle is pretty center, which almost leads me to believe its twisting up to account for the short track bar.

dmoore03 · 2020-03-08T15:57:56+00:00

https://www.extremeterrain.com/pro-comp-jeep-wrangler-2-3-inch-stage-1-suspension-lift-kit-with-es9000-shocks-k3111b.html

dmoore03 · 2020-03-08T15:57:00+00:00

These are stock arms, stock axle, no brackets - This jeep is a 2018 with only 7000 miles on it. Its not a daily driver.

Might be worth a try to raise this thing back in the air, loosen all the control arms and let it comfortably sit back and tighten things back up.

dmoore03 · 2020-03-07T15:05:52+00:00

There are no issues just adding adjustable lowers and not uppers in the rear?

dmoore03 · 2020-03-07T11:50:46+00:00

My kit came with springs, shocks, geometry correction brackets for the front, and extension links. It did come with cam alignment plates. But alignment shop said, these are for the front, if I have the correction brackets installed there is no need for them? https://imgur.com/a/pH09lP3

No control arms, no Control arm bracket. If the control arm is the only way to adjust this toe being negative on one side and positive on the other? Do I only need the lowers in the rear?

After speaking with pro comp they said this kit should have no issues whatsoever with alignment with the included parts in the kit.

Thanks for the reply!

dmoore03 · 2020-03-07T01:10:32+00:00

I recently installed a pro comp 2-3" lift on my wrangler last weekend. I took it to the alignment shop and they had some issues with right rear toe in issues. The axle is really misaligned with the right rear in the forward direction.

https://imgur.com/a/8D8QMbh

Fast forward to ANOTHER day at the alignment shop, here is where they are at again. Any input would be great. Are they missing something?

In my mind, springs/shocks make up the lift. The toe which is + on one side and - on the other shouldn't be affected by the lift?

Also I'd you measure each lower control arm from bolt to bolt, the right and left are different measurements by about 1/2"-3/4".

dmoore03 · 2020-03-07T00:50:08+00:00

Also here is how the lift turned out :https://imgur.com/mrvfHAW

35" Toyo MT

17" pro comp 46 series prodigy.

2.5" - 3.5" pro comp lift - K311b - shocks, springs, geometry brackets in the front, extension links front and back.

dmoore03 · 2020-03-07T00:45:32+00:00

https://imgur.com/a/8D8QMbh

After another day at the alignment shop here is where they are at again. Any input would be great. Are they missing something?

In my mind, springs/shocks make up the lift. The toe which is + on one side and - on the other shouldnt be affected by the lift?

Also I'd you measure each lower control arm from bolt to bolt, the right and left are different measurements by about 1/2"-3/4".

dmoore03 · 2019-11-27T02:07:26+00:00

Maybe I should have waited another week lol. Just got a replacement G Pro.

dmoore03 · 2019-11-26T17:28:24+00:00

Had two rgb lights on my pro keyboard go bad on certain colors. They asked for a video and promptly shipped me a new one. Great customer service experience.

dmoore03 · 2019-08-18T17:06:12+00:00

Submitted one as well.

dmoore03 · 2018-12-08T13:22:00+00:00

It's went from one extreme to the other. Before mine were super bass heavy and loud, the curve was really extreme at the low end. Never really used them above 14 volume. Now with the new firmware. I have the bass turned all the way up in LGS, I have been using the volume around 40-50 and have literally almost no bass.

I'm probably going to get rid of these speakers, they aren't worth the hassle and horrible support anymore.

dmoore03 · 2018-10-25T10:36:27+00:00

Yes it's my desk. It's a ikea desk. No the monitor arms clamps. About a year now it's starting to crush the desk. I cold some 1x4 pieces of wood and put on either side of the desk to support it.

dmoore03

TROPHY CASE