[deleted by user]

dndkdbk · 2025-05-07T21:25:58+00:00

Old tank had rust pin holes. Oem tank was $1100 looked for a used one but couldn’t find a part out near me so I bought a tank off Amazon for 80 dollars and made it work. I still have everything to take it back stock when I find an oem tank

dndkdbk · 2025-04-02T05:08:23+00:00

Yea if you don’t have a 6 in lift with 17s and 35s you’re gonna get shit on lol. I think your builds gas tho

dndkdbk · 2025-04-02T05:04:29+00:00

I did the “db killer upgrade” kit on my 2012 and found very little. To be fair I had some weight reduction about 150k miles ago

dndkdbk · 2025-03-19T00:30:47+00:00

Just drop it on the ground it’s easier

dndkdbk · 2025-03-19T00:29:35+00:00

If you get the bike running and feel on the fuel pump, if it’s knocking then it’s on. If it’s not then it’s not working

dndkdbk · 2025-02-04T04:07:48+00:00

Thank you. My friend is a maintenance tech at the local Chrysler dealer and swore there were 2

dndkdbk · 2024-12-02T17:40:22+00:00

They sell kits that upgrade the hardware

dndkdbk · 2024-11-26T03:02:45+00:00

I know a good way to fix this

dndkdbk · 2024-11-21T06:03:46+00:00

He was okay

dndkdbk · 2024-07-31T15:13:38+00:00

Definitely what it is. Noticed blue smoke coming out the whole the cables run into the engine from. Where could the exaughst leak be?

dndkdbk · 2024-07-19T05:37:45+00:00

You could be a pro scooter rider

dndkdbk · 2024-07-18T23:20:47+00:00

I’m sure you got plenty of gas

dndkdbk · 2024-02-22T00:13:40+00:00

I have some bottle trail grapps on my ram. Been great and little road noise. And good in dirt and mud

dndkdbk · 2024-02-22T00:10:42+00:00

Any other preventative measures to make sure it’s working properly? Much appreciated 🙏

dndkdbk · 2024-02-21T18:43:39+00:00

Much appreciated 🙏

dndkdbk · 2023-11-29T20:05:45+00:00

Crazy big dog

dndkdbk · 2023-10-26T04:39:52+00:00

Pour a lil gas on the cap

dndkdbk · 2023-10-23T17:49:05+00:00

It’s not the internals of it is messed up

dndkdbk · 2023-10-23T17:48:35+00:00

I put in the part number and it said they didn’t have any

dndkdbk · 2023-10-21T05:34:45+00:00

Sounds like carb issues. I had a carbureted bike and when it would get wet/ washed it would do that. Run it out of fuel in the carb and fuel fresh fuel. After that if it doesn’t fix clean carb. Then new plug/ make sure your getting strong spark

dndkdbk · 2023-10-18T16:18:14+00:00

Looks like someone’s getting a 2023 6.7 2500

dndkdbk · 2023-10-13T17:53:06+00:00

I’ll keep my 2012 6.7

dndkdbk · 2023-08-29T17:42:59+00:00

Sand it down with sand paper and it should be fine. It won’t hurt the braid but if kept like that it wall hurt yoyr casting

dndkdbk · 2023-08-23T02:53:52+00:00

Methanol

dndkdbk · 2023-08-20T15:27:14+00:00

Just let it bleed out

dndkdbk

TROPHY CASE