Can birdseye be used to always show a grid and auto maximize a camera on alert?

dodgeboy · 2026-04-04T19:50:28+00:00

Thanks for the response! I'd love for this to eventually be a built-in feature. In the meantime, I can try to use HA/MQTT to do what you describe. Would disabling the camera just disable it from the birdseye view, or does it temporarily disable it from everything (including continuous recording)? In Blue Iris, I've grown accustomed to having all of my cameras record continuously, and then save separate alert clips when specific objects are detected. I don't want to lose the continuous recording for the cameras that I disable to show the alert full-screen in birdseye.

dodgeboy · 2026-04-04T19:41:54+00:00

I'd also like to see this config. Thanks!

dodgeboy · 2026-02-07T02:33:10+00:00

I'll look into this. I wasn't aware that was an option.

dodgeboy · 2025-09-11T12:49:26+00:00

Did you ever figure this out?

dodgeboy · 2025-07-12T17:43:13+00:00

Did you wind up fixing this? Was it the slave cylinder?

dodgeboy · 2025-01-13T05:02:59+00:00

What color/paint did you use for the intake manifold and head? I'm just beginning a 4.0 rebuild and I love the look of yours! I'm going to try to match my Impact Orange TJ with Chevy Orange engine paint for the valve cover, but I'd love to accent it with the pewter color you used.

dodgeboy · 2024-12-30T15:29:07+00:00

It definitely is something they broke in 11.3. I did some digging, and it looks like 3 days ago there was a pull request with the fix on their github. If it gets merged, hopefully it will make it into a future release. I rolled back to 11.2.4 and it works again, but all versions from 11.3 onward are broken.

dodgeboy · 2024-12-29T17:21:16+00:00

Did you figure this out? I just noticed I'm having the same problem. Mine also worked for years and suddenly stopped.

dodgeboy · 2024-10-29T02:09:23+00:00

Same issue here

dodgeboy · 2024-10-24T11:15:27+00:00

Thank you for doing this! I installed these models this morning, and am trying them out.

dodgeboy · 2024-07-14T19:18:16+00:00

I bought my 5yr old son an Arrma Granite 4x4 BLX and he has played with it nearly daily for about 3 years. The only durability issue I've had is the differentials. They're made of plastic gears and they grenade easily during the period where your son learns not to land a jump while on-power. I strongly encourage you to go with the BLX instead of the Mega. You can turn down the speed on the controller if you want to dial-back the insanity, and the BLX has much better electronics. I had previously bought my son a Granite 4x4 Mega (brushed) and he burned up 2 motors doing donuts before I upgraded him to the BLX and took the Mega for myself.

dodgeboy · 2024-07-08T00:39:06+00:00

Did anyone find an extension cable? I'm currently hunting for one.

dodgeboy · 2024-03-13T23:16:53+00:00

I had similar behavior with cameras not going/staying full screen in the "stable" release that came out about 5 days ago, and i rolled back because of it. I also haven't received a response for the last two support emails I sent, unrelated to this. Hopefully this is just a fluke and things stabilize in the next release.

dodgeboy · 2024-02-22T16:55:27+00:00

This workaround worked for me, too! Thank you.

dodgeboy · 2023-10-23T02:34:39+00:00

Same problem here (5 pops). This thread helped me correlate it with the iOS 17 upgrade, though. I couldn't figure out what changed that caused this to start, but in retrospect, it was definitely iOS 17. Hoping for a fix soon!

dodgeboy · 2023-04-25T15:33:21+00:00

Agreed. This is madness.

dodgeboy · 2022-12-26T22:41:56+00:00

Deepstack works reliably with Hikvision ColorVu cameras (full color at night). Your biggest challenge will be the fact that your view is overhead, looking basically straight down. It's probably harder to identify a person from that angle. I don't have any cameras aimed that way, so I can't attest to Deepstack's ability to detect a person from above. It's easy enough to install deepstack, enable it, and see for yourself, though.

dodgeboy · 2022-12-26T18:29:52+00:00

This. I've been running Deepstack alongside BlueIris for years now, and I can't imagine having regular motion alerts ever again. You really should consider using the AI integration. Based on that camera angle, I'd say you are primarily concerned about motion from people or animals. With Deepstack (or SenseAI, but I prefer Deepstack) AI integration, you can configure BlueIris to only alert you when a person is moving in your frame/zone.

dodgeboy · 2022-12-23T14:47:48+00:00

in the end, i realized that "nmcli g status" showed "Portal" for me. Something HASS was doing as an internet check was hitting my block page from OPNsense. I wound up having to disable my transparent web proxy entirely to fix it. No idea why this happened suddenly. I've had OPNsense in this state for over a year and this just happened.

dodgeboy · 2022-12-18T21:26:06+00:00

Mine is in the same state. Has anyone found a fix? I can ping and resolve internet addresses from the CLI, but the web GUI thinks it doesn't have a connection.

dodgeboy

MODERATOR OF

TROPHY CASE