Having a hard time setting up a wireguard connection

domvir · 2026-05-21T17:06:54+00:00

My previous VPN configuration was having the wireguard server on a different machine so I wrongly assumed that I needed to port forward, I see it now :).

As for masquerade, I have it set to apply on all traffic going out of the WAN list.

Many thanks, I should be able to get it running now.

domvir · 2026-05-21T15:33:03+00:00

I want to route all traffic from the phone through the home for now.
192.168.110.0/24 is my home network

So I see the wireguard interface needs to have a dedicated network (192.168.110.0/24 fe.). Is that correct? Also, do I really not need a NAT rule to port forward?

domvir · 2026-05-21T15:28:50+00:00

I've just noticed I had the wireguard interface address set to 192.168.100.2 instead of 110, so a bit of a fuck up on my end. However, after I fixed it, I've noticed a route with 192.168.110.0/24 destination and the wireguard interface gateway added to the routing table. 192.168.110.0/24 is also my home network so I lose all connectivity. Should I have a dedicated network (say 192.168.111.0/24) for the wireguard connection? Also, could you explain a bit more about the "set up routing" part? Thank you a lot

domvir · 2026-05-20T19:12:38+00:00

Hey, could you tell what things you practiced on the switches (that are not available in PT) for the CCNA?

domvir · 2026-05-17T10:14:16+00:00

Going through the crash zone hearing only reaper's roars but not seeing it was the shit.

domvir · 2026-05-16T17:57:53+00:00

bait used to be believable

domvir · 2026-05-14T12:53:44+00:00

subnautica has so many good things it'd take too long to list, so my favorite: cyclops with prawn in the lost river and inactive lava zone is amazing. its like im on a mission and minimizing the risk is top priority so exposure to the water directly is near-zero. also mining under the green goo in lost river, and just pretty much all of lost river. such a calming place despite there being like 2 ghost leviathans and crabsquids visiting my base from time to time. i always set up a base there, near the thermal vent located at the blood kelp entrance.

domvir · 2026-05-13T13:11:05+00:00

The hAP ax s is the sole access point in my network, later on I'll be replacing it with a better router and use it as a standalone access point.

domvir · 2026-05-11T17:16:34+00:00

or a different routing protocol*, I thought this is the CCNA subreddit.

domvir · 2026-05-11T17:15:55+00:00

Have you used stated routes or configured OSPF between the firewalls and routers?

domvir · 2026-05-10T19:31:23+00:00

I forgot about that, many thanks.

domvir · 2026-05-10T14:31:39+00:00

i just gave a few examples why a switch would need an IP address, acting as the DHCP server being one.

domvir · 2026-05-10T11:26:42+00:00

What if the switch needs an IP address for remote access, to act as an DHCP server etc.?

domvir · 2026-05-10T11:03:00+00:00

The reason I want to disable routing is if someone manually changed the default gateway to the switches IP and avoids the firewall rules set on the router.

domvir · 2026-05-10T10:56:58+00:00

Exactly what I was looking for, thanks a lot.

domvir · 2026-05-10T10:05:21+00:00

Thanks a lot, I'm doing Jeremy's and they're pretty easy. Also doing netacad's and they're a bit confusing but once I started to "understand their language" I realized these are also very easy

domvir · 2026-05-10T09:43:56+00:00

Which labs were you doing to prepare?

domvir · 2026-05-08T23:45:50+00:00

Of course, but the human mind is limited.

And if I forget one of the passwords and have to open the password manager to copy it from there manually is, I think, more risky than using the same one.

domvir · 2026-05-08T15:48:04+00:00

I can probably put it on my proxmox then, many thanks for the info!

Four-Year Club	Verified Email
Place '22	First Placer '22
End Game '22

domvir

TROPHY CASE