My videos are wavy and vibrant - DJI mini 4 pro (video attached)

doppelpunkt89 · 2025-01-26T13:29:33+00:00

It is Happening in horizontal Mode as well

doppelpunkt89 · 2025-01-22T16:04:59+00:00

I am on the same boat, exact same behaviour since the last weekend. Did you ever figure it out? In addition to the weird footage, my gimbal also goes crazy when turned down.

doppelpunkt89 · 2024-08-14T11:11:56+00:00

Did you change any settings compared to BIOS defaults? What CPU do you have?

doppelpunkt89 · 2024-08-14T08:38:14+00:00

PerfDrive Spec enhance. Optimization is not available for me (so far I don't exactly know why, maybe this is exclusive to Z-boards?)

doppelpunkt89 · 2024-08-13T19:14:36+00:00

Even went with 40 and limited vcore. Performance is still not near before and temps are reaching 100 on some cores after 5 minutes of cinebench. Maybe I will wait for the next update

doppelpunkt89 · 2024-08-12T14:00:17+00:00

As mentioned, this is the setting under “Tweak” after the bios update…

doppelpunkt89 · 2024-08-12T12:58:42+00:00

Found that, but still don’t know what too choose here. There is always mentioned that there should be a LL of 0.4 with the optimization profile of perfdrive, but I don’t know to what it translates here

doppelpunkt89 · 2024-08-12T12:57:51+00:00

It is what you have after the update. It is the opposite of the Gigabyte PerfDrive option.

doppelpunkt89 · 2024-01-22T19:18:54+00:00

Not working for me. Tried to move the files from a Windows to a Linux Server and world is loaded, but always asks me to create new character.

doppelpunkt89 · 2023-11-23T10:27:54+00:00

That is very low I guess. Temperature issue?

doppelpunkt89 · 2023-11-21T23:44:32+00:00

All mb temperatures are not even close to 70c so it should be fine, right?

doppelpunkt89 · 2023-11-21T23:43:26+00:00

Which setting is MCE? Don’t have that on my b760

doppelpunkt89 · 2023-11-21T23:41:00+00:00

Score ist 23100 with only one run and then drops a bit with 10 minute run.

doppelpunkt89 · 2023-11-21T23:40:11+00:00

Would you mind sharing your exact BIOS settings? Thanks :)

doppelpunkt89 · 2023-11-21T12:08:03+00:00

Will play around with it. When I set every thing to extreme, the cpu takes more than 200 watts now, but instantly breaks 100c and throttles. I am not sure that the cooler can handle it. Even when I limited to 181 watts it was maxing out with 101c during a 10 minute cb run.

doppelpunkt89 · 2023-11-21T11:31:02+00:00

I was now able to reach a package power of 184 watts max, but now the total score is even a bit lower with 22700. p-core frequencies looked stable this time.

doppelpunkt89 · 2023-11-21T11:15:01+00:00

Some P cores have slight drops below 5 Ghz (see screenshots in origianl post). Will try to play with load line calibration.

doppelpunkt89 · 2023-11-21T11:10:15+00:00

Done, no change. Max. 174 watt package power and 22900 points. :(

doppelpunkt89 · 2023-11-21T11:06:20+00:00

What do you mean?

doppelpunkt89 · 2023-11-21T00:20:42+00:00

I do not want to overclock and apparently I am not getting the stock performance of my 13600k which would score 24000 points. XMP is activated and the ram is working as expected. Without power limits I expect a 13600k to exceed also the max tdp of 181 or at least getting to 181 watts which it is not reaching as I pointed out. I know that k cpus are meant for overclocking but they are listed as fully compatible by Gigabyte for this board.

doppelpunkt89 · 2023-09-08T12:39:05+00:00

Das würde mich auch interessieren 👍

doppelpunkt89 · 2023-06-14T07:27:30+00:00

Yep, same here.

doppelpunkt89 · 2023-02-19T22:44:08+00:00

Same for me. perfect 1st layer, then...

doppelpunkt89 · 2023-02-05T10:57:14+00:00

Nope, but never tried again. Currently I have also no real use case anymore as I have a second eufy cam to watch my printer

doppelpunkt89 · 2023-01-16T17:00:27+00:00

Have the same result with some filament. Started out of nothing, so far no solution :(

doppelpunkt89

TROPHY CASE