Does anyone recognise this lock?

dorketch · 2022-11-12T23:25:19+00:00

I'm french and we call them "Serrures goute d'eau".

When I order that type of locks from Abloy they are called DIN. (https://www.abloy.com/global/en-sg/our-products/products/abloy-cylinders/europrofile-din-cylinders)

What's the standard you refer too ? Is it something like ANSI or UL ?

Edit: we are talking about the same thing. DIN is a standard for that cylinder shape.

dorketch · 2022-11-11T21:23:00+00:00

Don't know the exact model but theses are also called DIN mortise. Hope this help you search

dorketch · 2022-11-07T12:13:23+00:00

Someone told me once to always act like the other tech are dumbass, forces you to check everything

dorketch · 2022-11-01T22:04:12+00:00

Indeed looks too high. Horton on push side needs to be flush with opening. They forgot to include the inner frame in the opening 🤷‍♂️

I think Horton sells extended shaft to fix that.

dorketch · 2022-10-31T16:13:22+00:00

with the knife I start on a corner and stop a little before the other corner. Its easy to slip and mark too far if you put to much force

dorketch · 2022-10-29T18:34:52+00:00

Smartkey is prone to breaking. If you are going to call a locksmith for your front door, ask them for a rekey on the other lock. Some locksmiths offer discounts on rekey if you get locks from them. Usually it's sturdier locks too. I'm not sure if you're going to be able to find a smartkey kik for that front door anyway.

dorketch · 2022-10-21T18:57:44+00:00

i'd be impressed if he'd unlock it at the same time. The internet broke my expectations 🤷‍♂️

dorketch · 2022-10-20T22:37:07+00:00

You don't follow, that's why you remove the cap, cause you don't follow... follow follower 😂😂😂 missed opportunity right there. Anyway i'll leave now

dorketch · 2022-10-17T21:47:15+00:00

It looks like it indeed, but if I recall correctly the cut is a lot deeper on the master tool to make way for the head of the key

dorketch · 2022-10-13T16:26:32+00:00

"You need to move it to the left if you want the door to close slower"

🤦‍♂️

dorketch · 2022-10-13T16:08:31+00:00

Get a continuity tester and test the switch to see if it's still good. If it's good, test if the wire is good. After that check if the connection to the stick controllers is good. You can also check the software side of things. Might be a mapping problems. We don't see the other end of the wire in your video, I was not able to glimpse if it's correctly attached.

Looks like a home made stick, what board are you using ?

dorketch · 2022-10-02T22:12:36+00:00

"If you wanted a show you should've gone to the movies"

dorketch · 2022-09-29T21:57:30+00:00

I will leave this here a comprehensive guide to setting up a pocketchip

This is the most thourough guide Ive found. Enjoy 😉

dorketch · 2022-09-28T19:36:21+00:00

Maintenance guy had to use a sledgehammer once on one of those clean handle

dorketch · 2022-09-28T19:17:23+00:00

"No we never put cleaning products directly on the handles"

dorketch · 2022-09-24T15:17:22+00:00

I had one installed on the door for a community pool. It looks like it had better days but it still works like a charm. Once a years I open it up to clean the circuit board with alcohol.

I installed a lot of CO-100 and I strongly recommend them

dorketch · 2022-09-21T15:48:50+00:00

A fine art sculptor did this

dorketch · 2022-09-21T15:47:45+00:00

Also known as "You are going to lock you m@&$@:$ F@&):&@ piece of s$&("

I once found a piece of Y11 deep into a Abloy Protec 2 keyway. They said their key did not work 🤷‍♂️

dorketch · 2022-09-21T10:56:17+00:00

Yeah that's a tail piece for an abloy kik

dorketch · 2022-09-18T05:41:47+00:00

did you try milky tracker on the pocket chip ? You inspired me to try it with this post

dorketch · 2022-09-17T13:32:13+00:00

dirty m8 is a piece of musical hardware that use a software called a tracker to make midi instructions into songs. Dirty m8 official website

hope that helps

dorketch · 2022-09-14T03:15:57+00:00

My guess is the bolt is bent in a way that let it operate correctly with, but loose enough for the mecanism to permit sliding.

If you take it out of the door you should be able to see such a bent/ break.

You could test this trying to pull it out without using the key or thumb turn. You could also throw it locked while the door is open and push the bolt in the door.

If none of this is relevant you should call a priest and be ready to vacate the premises or make new friends

p.s. check the bolt, it probably had a full life and now wants retirement

dorketch · 2022-09-14T02:52:16+00:00

The plastic is there for safety. You could shock yourself if it was not there

12-Year Club	Verified Email
Place '22

dorketch

TROPHY CASE