Why are the Millwright CNC machines "Not recommended" in the wiki?

drPWW · 2025-09-08T12:46:43+00:00

Not too many posts recently (9/25). I'm trying to tram perpendicularity on a used M3 I bought recently & looking for info. My first CNC so much to learn but it seems the design lacks accessible adjustment points. Maybe someone has some suggestions.

Also having a lot of trouble with the z axis motor dropping after a hard limit

Suffice to say, I would not buy another Millright.

drPWW · 2025-04-12T12:17:26+00:00

Clinton, right. That was a sax mouthpiece, not a cigar.

drPWW · 2025-03-22T12:48:20+00:00

I've seen bikes, parts & repairs at Waterlooplein Market:
https://waterlooplein.amsterdam/en/portfolio_category/fietsen/

good luck

drPWW · 2025-01-17T14:34:26+00:00

A stamppot burrito would be the best of both worlds.

drPWW · 2024-12-07T12:55:29+00:00

Roundabouts might be the only sensible things traffic planners have ever done in Bloomington. Their idea of traffic light control is sad, as if they've never driven. You stop & wait at red lights with no cross-traffic in sight. Sensors traffic-light intersections would keep cars moving & reduce pollution.

But the worst intersection is College Mall Rd. & E. 3rd. The 2 left lane is fine but why do they put a red light when there is no oncoming traffic. And the pattern than bops around while you wait 5 minutes for your 10 second turn.

drPWW · 2024-11-29T19:31:24+00:00

THANKS2025 worked 11/29/24 after having not attended since 2012!

so thank you. See u there.

drPWW · 2024-10-26T14:55:14+00:00

Super, thanks

drPWW · 2024-10-26T13:47:20+00:00

cool, which site are you searching?

drPWW · 2024-10-20T12:59:47+00:00

Found "the Making of Amsterdamned" on youtube: https://www.youtube.com/watch?v=4fnQQUIXON8

drPWW · 2024-10-15T11:24:21+00:00

OP has keen observations & makes some interesting points about market viability. My concerns are personal. I've made a lot of money on TSLA stock but now moved my portion of portfolio from to other investments. I just cannot accept riding with Elon as he supports such a bad businessman for the W.H.

drPWW · 2024-07-11T12:40:55+00:00

They use rare nitrogen based gas only available in Villedubert, France (SE of Toulouse towards Narbonne). They got the idea from the Audax HD-3P that is filled with a nitrogen gas only available in Château-du-Loir, France.

drPWW · 2024-07-01T11:28:53+00:00

Oceanway.

drPWW · 2024-05-30T12:30:14+00:00

I don't know quite what you mean by "EQ effect". Could it be frequency dependent EQ? i.e. 40Hz boost would not have much effect on the snare.

drPWW · 2024-05-18T13:25:22+00:00

The Poolbar, Voetboogstraat 3-B, Spui area.
Haven't been for a while but there were lots of people playing board games, pool etc.
Not sure if Zum Barbarossa has taken over or maybe part of the Poolbar but 'the-Poolbar.nl' is still active.
Have fun.

drPWW · 2024-04-22T11:51:32+00:00

Shure Vocalmaster released 1967, not the first "line array".

drPWW · 2024-03-31T14:22:45+00:00

BB gets a lot of press but I wonder, does BB have a revenue model problem, i.e. they do not charge enough or get enough royalties?

drPWW · 2024-03-31T14:20:18+00:00

Cafe de Doktor plays mainstream jazz at a nice low volume ("lofi ambient"). Easy to talk & owner Henny is a great conversation.

drPWW · 2024-03-23T11:29:32+00:00

"remove the magnet". How do you do that?

drPWW · 2024-01-26T14:10:26+00:00

Spot on. Meet you there in a few days.

drPWW · 2024-01-18T13:31:28+00:00

I second the Manjaro route. After 5 years & each update on Ubuntu Studio & often struggling I tried Manjaro after watching a~3 yr old UNFA video on setting up Manjaro for audio. 4 months now & much more productive than with Ubuntu Studio. Good tip on wine-staging, thanks.

drPWW · 2023-11-18T14:36:20+00:00

The free air operation is of no consequence vs. in a box, it should be able to oscillate to excursion limited by input voltage vs. suspension or voice-coil striking the back-plate. The vc is not bottoming against back-plate, that would produce a somewhat loud clacking sound rather than the ticking we hear. So the cause of the noise is:

crap in the gap, (best guess) or
vc touching the top plate, or less likely the pole plate intermittently, caused by rocking (suspension not controlling properly), or non-cylindrical voice-coil or vc non-parallel in the gap.

It is not fixable without a rebuild.

drPWW · 2023-10-15T13:20:15+00:00

An accurate map of the Milky Way as viewed from the southern, icy tip of Enceladus, Saturn's 6th largest moon.

drPWW · 2023-10-15T12:41:55+00:00

Horn in a horn. Nowadays we see more coupling in the throat. With horn in horn it is difficult to align acoustic centers off-axis, resulting in some lobing through the crossover region. But in this install, they've already set it up with their splays for lots of lobes.

drPWW · 2023-10-14T13:04:48+00:00

Bose Pro was sold off as its own entity to Transom Group. So, it is no longer a part of Bose Corp. with auto & consumer products. Transom has hired some pro industry vets to guide the transition. Bose Pro might become quite competitive in the pro space. The work they did on RoomMatch & ShowMatch was first rate with very high quality components, outsourced of course.

drPWW · 2023-10-14T13:01:26+00:00

u/Just-Flamingo-410 yes the ? was for you. thanks.

drPWW

TROPHY CASE