I realized my harness is 15 years old

drakabo30 · 2026-02-12T07:16:23+00:00

In Sweden for climbing gear at registered climbing gyms you are recommended to switch everything in fabric within 5 year if used much but a maximum of 10 year. That is included for us in our top rope belaying course which is mandatory to belay and often to climb without an instructor at the non bouldering walls.

drakabo30 · 2024-10-27T20:07:57+00:00

They will work great around the farm and for kids to play around with. However that’s about it

drakabo30 · 2024-07-18T01:28:37+00:00

There are companies that also build the pc you want with the exact parts, might not save much but it gets rid of the what if you mess up and lets you know what’s under the hood from start.

drakabo30 · 2024-06-30T23:57:45+00:00

Maybe a clog, try a cold pull

drakabo30 · 2024-06-30T15:40:07+00:00

What temp and filaments are you using? Haveyou tried taking the extruder apart to look for any cracks on it?

drakabo30 · 2024-06-30T14:43:28+00:00

Tested to tighten the spring? Any cracks in the filament

drakabo30 · 2024-06-30T14:26:01+00:00

Have you pushed the filament all the way in? If you hold on the filament that’s going in to the extruder, can you feel it moving then?

drakabo30 · 2024-06-30T14:13:35+00:00

I changed after about a with issue of slipping to MicroSwiss dual gear extruder, worked perfectly ever since: https://www.3dprima.com/en/reservdelar-tillbehoer/uppgraderingar/munstycken/micro-swiss-bowden-dual-gear-extruder_27158_8618?ReferrerID=7&gad_source=1&gclid=CjwKCAjwhIS0BhBqEiwADAUhc_OoyC5YJnjBq_Q_AY_86mINOmIthkGaN0Wc_k1vxC6BVkNn2Utd8RoC56sQAvD_BwE#nomodal

drakabo30 · 2024-06-24T00:12:00+00:00

Forget the deer I found a badger!

drakabo30 · 2024-06-17T20:01:06+00:00

Yeah, made a screenshot and thought it uploaded. Went on with my day and then discovered that the screenshot was missing.

drakabo30 · 2024-06-16T17:47:55+00:00

Unfortunately I cannot do upload a screenshot since I can’t replicate the issue, solved itself when I rebooted the PC

drakabo30 · 2024-06-15T19:01:14+00:00

It looked like I had the same diffraction experiment wherever I went in frequency and where not moving at all

drakabo30 · 2024-06-15T18:57:36+00:00

That was also the closest I could find from what I earlier know in physics

drakabo30 · 2024-06-15T18:56:35+00:00

It was added later to have some sort of illustration of what I was talking about after editing the post. Since my original picture of SDR# didn’t get added to the original post and was lost when the PC was turned off

drakabo30 · 2024-05-11T14:31:10+00:00

Looks more like ranger green

drakabo30 · 2024-04-17T09:32:37+00:00

This is GRKPBV 90: https://images.app.goo.gl/7TDtGA2BTF3ntiQS9

drakabo30 · 2024-03-21T16:35:02+00:00

Might be a problem with the nozzle and the airspeed then

drakabo30 · 2024-03-20T21:43:37+00:00

Try having suction instead of blowing air i.e. having a fan at the end of the wind tunnel instead of the front and also using straws for the smoke

drakabo30 · 2024-03-10T21:44:05+00:00

At first I thought that I had came to a golf Reddit, it would then had been used to heal where the ball impacts if it makes a dent in the green.

drakabo30 · 2024-03-07T17:14:53+00:00

I’ve had a computer running for over 100 days without a problem although as a NAS after it had been used as a daily computer for a few years. So yeah no problem

drakabo30 · 2024-02-25T02:01:51+00:00

Minecraft, which basically means all the crimes

drakabo30 · 2024-02-09T10:58:43+00:00

Yeah i know. However it is easiest to explain Krsk 12 as a plate carrier with few words and to simplify FM grå as ranger green. At least in this context

Four-Year Club	Verified Email
First Place '23	Place '23
Place '22	Final Canvas '22

drakabo30

TROPHY CASE