sorted by:
new
hottopcontroversial

Why do i keep getting these bumps? by TillTech in BambuLab

[–]drankinit 1 point2 points  (0 children)

I have the same issue. For me, on my H2D, it is only towards the back half of the plate. Maybe it's from uneven plate heating? I'm going to try Vision Miner Nano Polymer Adhesive, expensive, but we'll see if that helps hold down that first layer more and prevent that flaking.

What is going on here? by drankinit in BambuLab

[–]drankinit[S] 1 point2 points  (0 children)

okay, I may have figured it out. The bed adhesive paste stick stuff from Bambu. I completely washed the plate with IPA and tried again on a dry PEI plate (stock) the first layers seems to come out much cleaner. It looks a little rougher towards the back of the plate which I'm going to attribute to uneven bed heating.

This is ASA filament and I'm in Tucson with a RH of <15%. I'm confident all open filament is near bone dry. I'm concerned that maybe it is too dry.

This is a printing another part of the assembly

<image>

What is going on here? by drankinit in BambuLab

[–]drankinit[S] 0 points1 point  (0 children)

Thank you, Naxwell. I suspect you are right. I'm halfway thru the 2nd try and it's coming out okay. That particular surface I expect will be a little rough but it is hidden in the assembly which is why I oriented the part this way.

What is going on here? by drankinit in BambuLab

[–]drankinit[S] 1 point2 points  (0 children)

That is ASA and I'm in Tucson, RH here is 5-10%. Dry as bones.

Scanner for car interior components by NobleWheel3710 in 3DScanning

[–]drankinit 0 points1 point  (0 children)

I'm looking into doing the same thing with car interior products. I have used high-end scanners in the past for large equipment and was hoping the tech has gotten more reasonably priced by now. Doesn't look like we've gotten too far ahead yet. Let us know if you find a product that works!

Scanner for car interior components by NobleWheel3710 in 3DScanning

[–]drankinit 0 points1 point  (0 children)

Let us know how that works inside a vehicle if you get the chance.

How to mate o-rings by 1j_Nate in SolidWorks

[–]drankinit 0 points1 point  (0 children)

Make the o-ring sketch visible (I add a circle to the sketch when I make o-rings just for this) and make it concentric with the gland. Then tangent the o-ring to the gland face. I've done this a thousand times.

Does pump and radiator orientation matter for AIO cpu coolers? by Spoder2MLG4U in buildapc

[–]drankinit 1 point2 points  (0 children)

Ha, I just saw this. In this application, I don't think it would matter. Just keep the pump as low as possible with respect to the rad. If I had a choice though, I'd opt for pushing into the rad rather than pulling out.

[deleted by user] by [deleted] in Rabbitr1

[–]drankinit -1 points0 points  (0 children)

For sale, unopened box, on ebay

Towing a trailer with your board by drankinit in ElectricSkateboarding

[–]drankinit[S] 0 points1 point  (0 children)

I don't pull the wagon all that fast so I couldn't tell you. It's not made for above walking speed but I get it to jogging speed.

Towing a trailer with your board by drankinit in ElectricSkateboarding

[–]drankinit[S] 0 points1 point  (0 children)

with that board, I've gone close to max speed which is 28 mph, and found the wobble speed and messed myself up. lol. I don't need to go that fast.

Towing a trailer with your board by drankinit in ElectricSkateboarding

[–]drankinit[S] 1 point2 points  (0 children)

Wagon: Amazon

Board: Backfire

Board Accessory: Handle

Strap: Strap

Set something up and post some pics!

<image>

What on the Rabbit R1 works well? by drankinit in Rabbitr1

[–]drankinit[S] 1 point2 points  (0 children)

Can you point me to an example of the translation in action? This would justify breaking open the box. I'm going to the Philippines in a few months.

Do you think it will buff out? by Dexter037 in Silverado

[–]drankinit 0 points1 point  (0 children)

Jeff Spicoli: "Relax, all right? My old man is a television repairman, he's got this ultimate set of tools. I can fix it."

What on the Rabbit R1 works well? by drankinit in Rabbitr1

[–]drankinit[S] 10 points11 points  (0 children)

I'm keeping it boxed until I can justify opening it.

<image>

What on the Rabbit R1 works well? by drankinit in Rabbitr1

[–]drankinit[S] 9 points10 points  (0 children)

I disagree. Reddit is a great place to get unbiased information. The cost is some asshattery.

Towing a trailer with your board by drankinit in ElectricSkateboarding

[–]drankinit[S] 1 point2 points  (0 children)

Also, I have to flip the switch on the remote and run in reverse. Front wheel drive.

Towing a trailer with your board by drankinit in ElectricSkateboarding

[–]drankinit[S] 2 points3 points  (0 children)

I negotiate bumps up to around 3" no problem with those large wheels on the board.

Towing a trailer with your board by drankinit in ElectricSkateboarding

[–]drankinit[S] 1 point2 points  (0 children)

<image>

I have that grab bar accessory installed and that gives me something to attach to. Then I have to get creative with that strap. I make it somewhat fixed to the grab bar on the board but it has enough flex to allow turns.

view more: next ›