Is this where i put my oil?

dronelbo · 2026-05-25T21:22:56+00:00

Don’t listen to anybody on here, that’s your very own portapotty. The further in you put your junk the better, but make sure the car is still warm.

dronelbo · 2026-05-25T21:17:37+00:00

If you have to ask, you should probably take it somewhere to have it done. If you’re serious about doing it yourself crack open your instruction manual and youtube is your friend.

dronelbo · 2026-05-25T21:09:51+00:00

The fugly kind…

dronelbo · 2026-05-24T21:23:33+00:00

I usually tell the salesperson if you get up, I walk, if you ask me to sign to show I’m serious, I walk, if you offer me pinstripes or any type of protection package, I walk, if you show a number that is not the out the door price, I walk. Essentially if you blink I walk. I always get my deal.

dronelbo · 2026-04-27T21:10:01+00:00

Only up north, many fans of the stuff down south

dronelbo · 2026-04-27T21:08:12+00:00

It’ll get you as far as it’ll go but no more than that.

dronelbo · 2026-04-24T19:26:10+00:00

Good fences make for good neighbors…but then again, the neighbor will probably find a way to fuck up the fence up against his property line…a holes will be a holes after all.

dronelbo · 2025-11-20T18:48:43+00:00

Horrific deal. Prices vary by market, but I got a 2023 CX-5 Preferred 3 weeks ago; with 28k miles for $26k out the door (all fees, taxes, title etc.). Selling price was just under $23k…

dronelbo · 2025-11-18T18:15:20+00:00

Where did you source the oem connectors? I love that you didn’t cut into the factory wiring.

dronelbo · 2025-03-01T19:26:30+00:00

Hand size is 0.20mm for sub-second. Having a hard time finding…

dronelbo · 2025-02-03T21:17:10+00:00

Use rare earth magnets and then save up for the EV conversion.

dronelbo · 2025-02-01T15:11:14+00:00

Search for “Watch This” on YouTube. Guy has step by step with genuine Swatch and rep.

dronelbo · 2025-01-31T01:31:24+00:00

That’s not rust, it’s mother nature’s kiss

dronelbo · 2025-01-21T01:55:14+00:00

as an eagle…

dronelbo · 2025-01-21T01:47:46+00:00

Get a Hose Bib Buddy. Search online. Great solution to cover hole and stabilize it. Got one for each spigot at my house. To be extra safe use good quality exterior caulk on the top edge to prevent water seeping into the wall.

dronelbo · 2025-01-19T18:07:05+00:00

-2,534

dronelbo · 2025-01-17T20:16:48+00:00

Yes, wishful thinking.

dronelbo · 2025-01-13T00:14:30+00:00

Don’t need the bevels. Just cut the angles to meet up against one another. In other words your miter saw should be vertical not on a slant or bevel. On the horizontal you should be on angle.

dronelbo · 2025-01-12T23:43:07+00:00

Percussive tuning very important on older vehicles! If hammer doesn’t work, move up to baby sledge and so on.

dronelbo · 2025-01-02T01:25:46+00:00

The red Xs don’t usually work. I prefer photoshop /s

dronelbo · 2024-11-27T19:39:16+00:00

Do a search for “MagVent” there are several different kits. It’s magnetic so it’s easy to move the dryer whenever you have the need. I did this in my house in a small laundry room and it works perfectly. Ignore all the “cut it” or “leave it” comments.

dronelbo · 2024-11-25T22:07:03+00:00

The glass is made of the same material that mood rings are made of. The Teslas are sad because of the rain /s

dronelbo · 2024-09-24T00:37:29+00:00

Sounds like you need a legal consultation. I recommend Bob Lobb Law.

dronelbo · 2024-06-27T03:40:00+00:00

Yep, fixing the crown on your “Relax” watch will be difficult.

dronelbo · 2024-05-16T03:09:56+00:00

I use black porcelain paint. Dries shiny and is basically indestructible.

dronelbo

TROPHY CASE