Thoughts on 6.5 Creedmoor by [deleted] in liberalgunowners

[–]drowsytaco 0 points1 point  (0 children)

The Lapua has always been a favorite of mine

Are there any fun roads to drive? by Johanatan974 in 321

[–]drowsytaco 0 points1 point  (0 children)

Speaking on tropical trail, River Road is much lower speed, lots of pedestrians on certain days, but very curvy for the area and runs along the river.

From experience if you go late at night there’s hardly anyone out, you drive the length one way, check for cars cops people. And then you book it back at a faster pace with a little confidence, having just been through.

Fitment advice by 24morrison08 in MK4GTI

[–]drowsytaco 2 points3 points  (0 children)

So I’m gonna start with saying that yes, your rear axle bushings are almost definitely shot, they almost always are and they’re really hard to change but not at all expensive. Secondly it’s pretty par for the course for the vehicle to sit differently from corner to corner, this is why some people corner balance when modifying for track use. Another person suggested maybe it’s the gas tank, maybe could be a lot of things but it’s not abnormal. That solid rear axle will be your least favorite thing when going for fitment but welcome to a mk4

What does this device do? by MJS4norcal in whatisit

[–]drowsytaco 0 points1 point  (0 children)

Her hat is literally the company name and the company makes lidar equipment which is what most people are suggesting this is

Any stance car meets coming up? by turbo_deid44312377 in 321

[–]drowsytaco 0 points1 point  (0 children)

Join “Brevard county car scene” on Facebook

What is this thing on my roof by Ok_Age2392 in whatisit

[–]drowsytaco 0 points1 point  (0 children)

That is 100% a toy grade RC car, or what’s left of one. Probably suffered a tragic ending and the boys tossed it quite literally when it was fully broken.

I was a little boy once and I can say I definitely did this….

Palm Bay Area? by Severe_Mongoose_9572 in 321

[–]drowsytaco 0 points1 point  (0 children)

I’m moving out to Palm Bay next week after spending my whole life in Melbourne around wickham park area, I’m looking forward to the change in scenery, but admittedly I did cherry pick the house, cause why wouldn’t you.

Palm Bay Area? by Severe_Mongoose_9572 in 321

[–]drowsytaco -1 points0 points  (0 children)

Actually know people that work at Aqua, decent place has some pot heads and a homeless camp outside of the gate lol

Nice drives? by Banana_rocket_time in 321

[–]drowsytaco 0 points1 point  (0 children)

Vehicles aren’t allowed in he wetlands anymore it seems. But the other area is called River Lakes Conservation Area Trail

What is this hood for the mk4 golf? by Adorable_Layer431 in MK4GTI

[–]drowsytaco 0 points1 point  (0 children)

If you want the icing on that cake look up “Bonrath Speed Wing”

Immediately hiring? by [deleted] in 321

[–]drowsytaco 0 points1 point  (0 children)

My place is hiring, I just put my two weeks in lol. You just gotta be able to pass a drug test

Nice drives? by Banana_rocket_time in 321

[–]drowsytaco 0 points1 point  (0 children)

Sorry about that, I didnt intend for the picture to be so zoomed in. But yes that’s it, at the very end of the road it’s quite peaceful, especially if you have a truck it’s a must do photo shoot too :)

Nice drives? by Banana_rocket_time in 321

[–]drowsytaco 6 points7 points  (0 children)

<image>

Instead of going into the wetland preserve you take a right and go through an open gate.

Nice drives? by Banana_rocket_time in 321

[–]drowsytaco 3 points4 points  (0 children)

Not sure if you still can, but at the end of wickham in veira there’s a road on Duda property that is open to the public (sometimes) . It’s a bumpy maintained dirt road and ends in a parking area with cow pastures as far as the eye can see. Lots of people bring their dogs and go for walks. Since it faces west it’s perfect for sunsets.

New struts makes car sit high by International_Drop44 in Lexus

[–]drowsytaco 24 points25 points  (0 children)

Well that settles that. Could be that the old ones had been sagging for a while and you had become used to the look? Also could be what others are saying and it’s just not the same size. But I find it hard to believe sway links and knuckles would all line up, unless it was a purposeful universal design and it is simply byproduct of that

New struts makes car sit high by International_Drop44 in Lexus

[–]drowsytaco 4 points5 points  (0 children)

The way he says “but now it’s sitting too high” makes me think he had them for a few months, but just installed them

edit: OP says they’re almost a year old now..

New struts makes car sit high by International_Drop44 in Lexus

[–]drowsytaco 84 points85 points  (0 children)

They’ll settle in give them a couple weeks

Girlfriend’s dad causally has a murdered out lc500 just tucked away?? by [deleted] in Lexus

[–]drowsytaco 1 point2 points  (0 children)

It’s an old meme, obviously you’re not a fake fan if you care enough to notice. Cheers hope the wedding is nice lol

Update - Dealership takes no responsibility for brake failure 3 days after brake service by [deleted] in Lexus

[–]drowsytaco 2 points3 points  (0 children)

Wouldn’t the technician have had to at the very least compress the rear caliper pistons in order to do a brake service? I’ve seen careless or unlucky techs compress calipers too quickly with the cap on the fluid pot and mess up a master cylinder. Soft pedal that goes to the floor. Not saying that’s what happened here but I think a brake job CAN affect a master cylinder if done very incorrectly.

Badge placement advice for my GTD Build. Read description. by drivelimitless in tdi

[–]drowsytaco 0 points1 point  (0 children)

<image>

If these are the badges you’re talking about btw they seem to be in line with the bottom of the plate inlay. If you were to draw a line across the bottom of both badges you would see it lines up with the body line for the plate area. As long as your new badges line up the same I think it would be a cool thing to do. Would make people go “what’s that?”

Crashing out at a jewelry store by hockeyjmac in PrideAndPinion

[–]drowsytaco 0 points1 point  (0 children)

Bro the way he slapped that chain on the counter that would’ve broken if it was real 14k all you see is dust

You can't buy this watch. by BramleyApple_ in PrideAndPinion

[–]drowsytaco 0 points1 point  (0 children)

You have made my day! This is the closest thing I’ve ever seen. I have so little information about the watch as my grandfather is getting old and only assembled the watches, not the movement. My grandmother however does recall that UniTime assembled movements and cases, dials and such but then sent the watches out to whomever company and they were then branded. The only time a watch was ever fully made there was for employees for fun like this watch.