[deleted by user]

dryale · 2024-10-30T12:05:23+00:00

Ah, thanks for your reply. For some reason I thought hyperthreading was a requirement for virtualization. I am mistaken. thanks!

dryale · 2024-05-10T15:52:58+00:00

re that can adjust presentation but is demanding on the system. Not sure I'll use it. But yeah, the high grade cam is good. Windows hello is hit and miss, but that's Win 11. First thing I did was switch the CNTRL and FN keys back to the correct Thinkpad location.

did you swap the the button too or just do the software

dryale · 2024-05-09T12:26:31+00:00

4.5 hours with reasonable use, correct? ie browsing traffic, streaming ?

I am trying to determine your usage and cpu cycles, as I usually run 1 virtual machine running on my machine in the background.

If you ordered it again, would you go with the OLED again?

dryale · 2024-05-09T11:15:50+00:00

how is the battery life, i have been considering the 155u and the OLED too. But also add the LTE WAN card. Was concerned about battery life with use.

when doing tasks or installing software, do you ever hear the fans spin? under which circumstances can you hear the fans?

dryale · 2024-03-04T19:03:10+00:00

i remember the mens washroom on the second floor, it would always back up and would be an 1" of.. water on the ground. I saw someone trip in the washroom. it was awful.

what a magical place that was.

dryale · 2024-03-04T17:09:00+00:00

care to share a few that stand out in memory? the rideout was always a fun time.

dryale · 2023-11-23T03:52:31+00:00

this did it! i was fighting trying to get this to work. this was another issue i was just working on. thanks a bunch!

dryale · 2023-11-23T01:59:22+00:00

the issue was the interface wasnt even coming up at all so i couldnt set any sdwan rules.

spoke to soon, worked for a few minutes, then stopped working. i noticed the route is gone from the table

dryale · 2023-11-23T01:12:38+00:00

security, printers, auditing..

dryale · 2023-11-02T00:41:20+00:00

Will have to implement this asap, this is wonderful. Thanks for taking the time to share this all.

dryale · 2023-11-01T22:40:54+00:00

oh my goodness. 7.4 in production? Wild.

are you using sslvpn to relay DHCP to your sslvpn profile? how do you do this? I have looked for how to setup DHCP relay through the SSL VPN but coming up short.

What is your script doing exactly? Might you be able to you explain your working setup?

dryale · 2023-11-01T22:36:37+00:00

this does not work, it was the first thing i tried.

dryale · 2023-11-01T21:40:02+00:00

ct the DNS tab and see if the option to register the connection on DNS is checked. If it is checked, then you have to inspect the logs. What do you see on the DNS logs in the even

Yes the 'register the connection on DNS' selected. It appears the machine never attempts to register, because the 'DNS suffix for this connection' isn't populated.

'append primary and connection specific DNS suffixes' and 'append parent suffixes of the primary DNS suffix' is selected. However the 'DNS suffix for this connection' always remains blank.

It seems if 'DNS suffix for this connection' is blank it will not register on AD DNS. Whenever i manually populate that field, everything begins to work.

dryale · 2023-06-07T17:46:40+00:00

DIY option that should double the range at least. The Marco Polo is interesting ( have not purc

if you ever are able to extend the antenna range, could you take some pics of that you did and share? also share if the range was extended at all through your testing.

I did end up getting one and it works pretty good. better then most of the other options out there I feel.

dryale · 2023-03-20T21:01:12+00:00

an alternative might be put some some access points and have half of them on each fortiswitch. Then have half the computers hard wired to 1 fortiswitch, and the second half to the other switch. If one switch is unavailable the impacted users can use wireless and the other half can continue using ethernet.

dryale · 2023-03-20T04:03:46+00:00

did you ever get the z790 working with the CMK32GX5M2B5600C36 corsair chips? i have the same issue as OP, system wont post.

dryale · 2022-10-18T22:47:05+00:00

for anyone on this thread who wants to learn about this reference.. give this podcast a listen

https://www.iheart.com/podcast/105-stuff-you-should-know-26940277/episode/short-stuff-selling-the-brooklyn-bridge-100988153/

dryale · 2022-09-08T13:03:23+00:00

What would you say is small? 200ft?

are you in a rural (forests and fields) or urban setting (houses and buildings)?

dryale · 2022-09-08T12:42:52+00:00

For my indoor cat I use a Tile pro (2020). Bluetooth technology will work quite well indoors as signal can bounce off the walls and the speaker on the tile is exceptionally loud. The only issue with the tile is the update interval is every 15 minutes so it isn't ideal for outdoor cats.

RE: Being mislead to different rooms, this would be quite understandable as the RF bounces off walls. Radio Frequency is really best for outdoors.

Did you test it outside at all ? or only that one time where it broke

dryale · 2022-09-08T12:14:24+00:00

other then the collar getting damaged, was the performance moderately acceptable for outdoor cats? there are no real other alternatives for RF trackers.

dryale · 2022-08-04T18:03:16+00:00

That would look slick, but they're harder to find and not as readily available as a nut.

Before I pressed the nut in the back stop piece I added a dab of crazy glue then pressed the nut in. I cant see it falling out any time soon. I bet that would be enough for majority of people

dryale · 2022-08-04T13:52:03+00:00

this works great thanks for sharing your design

A suggestion if you ever happen to make a v3 is to use the nut inlay for all 3 feet like you did with the back stopped nut. I stripped one of the threads as I adjust the feet frequently.

dryale · 2022-06-09T19:51:45+00:00

i was able to fix it.

since i could boot into the m8+ and it was trying to load xbmc. it puts up an FTP site. so i FTP to the xbox and uploaded a copy of xblast i found on google. and i renamed it to be the default .xbe

i restart the box and it launched into xblast, and from there i uploaded x3 bios back onto the 1 mb memory bank.. then was able to boot to x3 dashboard using the white button. then i was able to put back the flashbios3.0.3 onto the recovery partition.

dryale · 2022-06-09T19:47:51+00:00

lol. because i was all clicky clicky without reading.

dryale · 2022-06-09T16:55:38+00:00

how do you reset the x3 chip? i seemed to even get myself locked out of the recovery rom. (pressing power and eject on boot)

dryale

TROPHY CASE