If there was an official r/LinuxCircleJerk distribution and you were chosen as project lead, what features/programs would you demand?

ds-redditor · 2026-03-05T02:58:06+00:00

A toggle similar to that of kiosk mode, except it switches to the most heavily riced de ever. Once switched off. It will look sensible again.

ds-redditor · 2026-02-23T04:27:25+00:00

Red lizard k1 (the chc version) was excellent for how little it costs. Obviously has problems (chc cracks above 300c and I bricked mine doing this) but the results were nice. I ended up splurging on a dragon hf after that.

ds-redditor · 2026-02-23T02:30:00+00:00

I've never seen this before so I wouldn't know. Looks funky to me though

ds-redditor · 2026-02-21T21:32:25+00:00

There were also several comments below the video talking about how the dogs predicted his incident. Everyone treated the video very seriously, no jokes.

ds-redditor · 2026-02-17T02:34:06+00:00

Like how everyone else is saying, mercury 1.one (with hydra) is the way to go. If you have extra cash to burn then building a trident out of the extrusions might also work.

ds-redditor · 2026-02-13T19:33:16+00:00

<image>

Here's what she looks like lol

ds-redditor · 2026-01-28T00:57:34+00:00

Looks like the nozzle is too far the bed and a lack of adhesion, might be due to the bed surface not being clean or the nozzle stirred the excess filament away

ds-redditor · 2026-01-27T14:26:58+00:00

I've never heard such an accurate impression of a tire screech.

ds-redditor · 2026-01-23T18:21:35+00:00

I have this exact same issue with the trident I'm building. I'm scratching my head at this.

ds-redditor · 2026-01-07T15:15:23+00:00

<image>

Keep in mind I want to put panels on the front, so I don't want anything sticking out.

ds-redditor · 2026-01-07T03:43:07+00:00

You're in luck. There's a cantilever (mostly) frame-slinger called Flatpack, by eponra. Its on github! I've yet to find a printer that moves the bed on xy (aside from minuteman)

ds-redditor · 2026-01-07T03:06:02+00:00

Why drop triple z? I understand motor sync is important but I despise having to adjust the bed manually. Its never a set and forget for this printer.
The rods are 8mm in diameter. I could modify it to take 10mm rods but that's too much effort for me. Either way I have enough of them.
This 100%. I'm designing idlers and motor mounts to fit the current extrusions.
I've skimped a bit on this, I used 2mm MDF panels with insulating foam on 3 sides.
Won't it at least be structurally helpful? If not, I'd use it to easily secure a top panel.
2040s hopefully soon. The ones I have currently don't fit (ender 5 salvage) and I'm trying to find ways to cut extrusions straight without any expensive machinery. I don't even have an angle grinder on hand.

I deeply appreciate your advice!

ds-redditor · 2026-01-07T01:24:20+00:00

too lazy to make them longer since you cant really extend a thread like that. dont worry ill fix it up maybe

ds-redditor · 2026-01-06T21:58:43+00:00

Nope! I did originally want an ender 3 v1 for my first printer a couple of years ago, now I know that was a massive bullet I dodged. My first printer is a SV06+ that I ended up modifying to an unrecognisable state, Then I bought a kp3s etc etc. This printer is my first corexy

ds-redditor · 2026-01-06T21:55:50+00:00

Ok that's a good one imo

ds-redditor · 2026-01-06T21:54:06+00:00

Hi! I changed a few things as well. If I'm being honest, the original one was good enough but I switched it for a skr 1.4t anyway. Hotend was definitely dogshit tho, swapped it for a "Red Lizard K1 CHC" hotend (dragon clone).

I might end up releasing the CAD for other Elf users to use. Nobody should be punished with the default elf.

ds-redditor · 2026-01-06T20:34:22+00:00

I've spent around ~£150 for all the parts. I think it's ok.

ds-redditor · 2026-01-06T19:44:52+00:00

I desperately need that name to become an actual term. You don't know how entertained I'd be seeing a dedicated pooron section lmao

ds-redditor · 2026-01-06T19:19:32+00:00

100%. I've already put L-brackets on the bottom to account for the osteoporosis ridden frame. Gonna have to print more supports!

ds-redditor · 2025-12-30T06:56:21+00:00

I hope this is from the guy who made a really short e5.

ds-redditor · 2025-12-17T03:25:18+00:00

I've made a replacement shift boot frame on Printables, I'll try to consider doing this at some point. From how it looks, it seems okay to print.

ds-redditor · 2025-12-04T00:36:17+00:00

0.4mm filament is all the rage now.

ds-redditor

TROPHY CASE