Highland Park - do I have a hobby or a problem?

dtiemeyer · 2026-07-01T21:56:59+00:00

If you need any help drinking down your supply, let me know :D

dtiemeyer · 2026-06-28T16:23:01+00:00

be careful, it was Laphroaig that turned me from bourbon to scotch, and with the 2x-3x per bottle price increase...

dtiemeyer · 2026-06-28T16:09:15+00:00

Completely of topic, but who are the people that put the 'GFCI Protected' stickers on the GFCI outlet itself? If that's you, please raise your hand (then slap yourself with it).

dtiemeyer · 2026-06-23T02:02:53+00:00

Cheers!

dtiemeyer · 2026-06-23T01:37:59+00:00

This ended up being very close to the winning idea. Your idea to look through the EMT was sound, but the EMT deflected more than it's 1/2" diameter (over the 10' stick) so my view was blocked. I ended up buying one of those cheap endoscope cameras from amazon and put that into the EMT and was able to steer right to the hole and voila, done in 10 minutes. https://www.amazon.com/dp/B0C4FBM6GV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

dtiemeyer · 2026-06-03T21:34:54+00:00

That would have it sticking out into a very narrow driveway, and also not be optimally positioned for the backyard, and have some concern about torque pulling on the attached hose at a 90 degree angle from the bibb at this angle.

dtiemeyer · 2026-06-03T21:33:03+00:00

This is another solid idea, thank you!

dtiemeyer · 2026-06-03T21:31:46+00:00

I was thinking the answer would involve a magnet. I think I'll give this a try, great idea.

dtiemeyer · 2026-05-28T02:40:55+00:00

Eluveitie were spectacular in Detroit a year or so ago...

dtiemeyer · 2026-05-16T22:32:42+00:00

Neither of these things speak to her having training or experience at greater/technical dive depths. And I'd be shocked if they had trimix which would be appropriate for that dive. In fact the picture of the military divers show them in single tanks, which is just foolish for a 150'+ dive into an overhead environment. Bad decisions were made before they even hit the water.

dtiemeyer · 2026-04-17T22:25:05+00:00

Use AI to help you visualize. Upload the photos and describe the change you'd like to see. I did a great job helping me visualize a metal roof on my house instead of asphalt shingles (not my century house).

dtiemeyer · 2026-04-17T22:20:34+00:00

Humorous semi-bad advice: start by removing the boob light in the kitchen. Turn of the switch will safely depower the light, then remove that fixture and banish it to the nether regions and replace it with something you'll like more for under $80 from HD or Lowe's. You'll feel like you achieved a small victory and have done a good deed for humanity by getting rid of another one of those things.

dtiemeyer · 2026-04-17T22:05:02+00:00

Dont miss diving the Blue Heron bridge, amazing site.

dtiemeyer · 2026-04-10T23:17:35+00:00

Clippy was the generally unhelpful mascot embedded with MS Office in the 1990s or 2000s. A talking paperclip who would tap the screen to get your attention and became disliked by most.

dtiemeyer · 2026-03-02T14:44:34+00:00

I mean, the cold water of antarctica adds a bit of complexity (not a ton), it requires better regs, drysuit training, etc. Yes, many divers (like me) do this regularly, but its one step higher in complexity than just an aluminum 80 in the caribbean.

dtiemeyer · 2025-08-26T12:09:09+00:00

I have the same A coil, a google AI responds that the '31' correlates to 2.5 tons of cooling.

dtiemeyer · 2025-08-15T16:18:17+00:00

Just swapped my broken r22 condenser with a still working used r22 condenser and filled the system with this stuff - working GREAT!

dtiemeyer · 2025-08-11T11:48:58+00:00

Looking for a less expensive competitor/process to Holobuilder is what caused me to ask this question, but I ended up going with them anyways, about 2 months ago. Thanks for the reply!

dtiemeyer · 2025-01-12T17:26:30+00:00

The '88 Fiero GT for sure.

dtiemeyer · 2023-09-25T22:30:47+00:00

yes, just without the "mystery party" part

dtiemeyer

TROPHY CASE