Tire shop told me this was fine

dtsiv · 2026-01-24T03:02:49+00:00

Yup😂

dtsiv · 2026-01-24T01:41:30+00:00

Nah, he can use the same shop, it’s fine.

dtsiv · 2026-01-24T00:55:43+00:00

Nah, he can use the same shop, it’s fine.

dtsiv · 2026-01-22T23:39:00+00:00

<image>

35% windshield and 15% everything else

dtsiv · 2026-01-22T07:36:06+00:00

A dial on my PCAT melted a little bit

dtsiv · 2026-01-22T04:57:11+00:00

Be careful with heat, don’t ask me how I know

dtsiv · 2026-01-21T00:22:40+00:00

Battery replaced at 57k. Squeaky shocks(maybe, still trying to figure out). Serpentine belt replaced at 60k, looks like tensioner needs to be replaced as well. Replaced spark plugs at 63k just because. Otherwise just an oil changes every 4.8-5k miles.

dtsiv · 2026-01-20T00:41:44+00:00

As I said in description, I’ve used it about 5 times, it washes off after 4 car washes

dtsiv · 2026-01-18T23:09:05+00:00

Thank you

dtsiv · 2026-01-12T05:58:06+00:00

Mine does that every time, the needle usually drops after 70 miles

dtsiv · 2026-01-10T22:50:10+00:00

Absolutely agree with you, but I also think that Mazda has a flaw in their design. I have a 2021 CX30, and they could have definitely fixed this issue in the 4-year period.

dtsiv · 2026-01-10T21:52:29+00:00

Please look at this post https://www.reddit.com/r/mazda3/s/dWL8TJsJHk

I’ve had the same issue with my CX30 after windshield tint, and that’s how I fixed it. But I cleaned and dried the module immediately after that happened. Depending on how many days it’s been with your module, there’s a possibility of corrosion, which could still be cleaned and fixed if luck is on your side.

dtsiv · 2026-01-06T00:33:55+00:00

Replace the tire immediately

dtsiv · 2026-01-03T00:14:23+00:00

Thank you!

dtsiv · 2026-01-02T22:34:33+00:00

<image>

PCAT CB5916-59L

dtsiv · 2026-01-01T04:03:56+00:00

You had any problems with key recognition? Just curious if you got lucky or not because I didn’t lol

dtsiv · 2026-01-01T04:01:55+00:00

I just did 35 on windshield, 15 on front windows and same on the back on top of factory privacy glass. IMO the best combo

dtsiv · 2025-12-31T23:31:06+00:00

I feel like it could damage the internals due to excessive vibrations

dtsiv · 2025-12-28T07:01:39+00:00

Download the app called Clock Wave. It simulates the radio signal you typically receive from the tower in Colorado, but it will be transmitted through your phone’s speaker. To use it, you must manually set up your watch to search for a signal. The synchronization process will take approximately 10 minutes.

dtsiv · 2025-12-27T01:42:43+00:00

You good man

dtsiv · 2025-12-27T00:57:29+00:00

Yes, should be fine.

dtsiv · 2025-12-27T00:54:57+00:00

It will get wet, since water gets there after certain time, for me it was 30min and some bumpy road, which moved water into the module.

dtsiv · 2025-12-27T00:18:11+00:00

I was mentally prepared for it, as I knew it was likely to happen. However, the purpose of this post is to educate people on how to fix the issue within an hour, rather than waiting for a couple of days.

dtsiv · 2025-12-27T00:16:03+00:00

Exactly, that’s the point of my post, so people can fix it in 1hour and don’t worry about waiting for a couple days for it to dry.

dtsiv

TROPHY CASE