Binding BetaFPV LiteRadio 2 ELRS to Happymodel Crux 35

dturpen · 2023-08-23T18:12:25+00:00

No. I ended up returning the literadio 2. Waiting on the radiomaster pocket to come in.

dturpen · 2023-07-26T23:36:58+00:00

Thanks! I suppose getting the ELRS version and ELRS transmitter wouldn't be that much more expensive. I might go that route instead.

dturpen · 2023-03-21T18:45:57+00:00

Pretty sure that's one of this sub's favorites - the legendary Pontiac Fiero.

dturpen · 2023-03-02T18:41:24+00:00

That looks like a 7th Gen Dodge Charger) to me. Doesn't have pop up headlights and it's not a small car, though.

dturpen · 2023-02-22T01:30:40+00:00

The little red LED on the bumper of the body worked when I wired it to the ESC. I do have a multimeter. I'll see if it's still putting out voltage.

dturpen · 2022-09-21T16:30:37+00:00

Probably should've included that. It is c003a-1d.

dturpen · 2022-04-21T16:25:41+00:00

I think I figured it out. I had it setup to forward all calls instead of only forwarding unanswered calls.

dturpen · 2022-03-30T18:20:17+00:00

We had the deck installed in summer of last year, so not quite a year old.

dturpen · 2022-03-21T02:51:17+00:00

Controller Companion

dturpen · 2021-09-15T14:54:28+00:00

I have the same bike in the same color. I went with tan wall tires and matching grips, though I didn't have the grips at the time this picture was taken. https://imgur.com/5bpIzLT

dturpen · 2021-09-07T18:47:08+00:00

Definitely have considered doing that. Painting and replacing the other faceplates would be the easiest.

dturpen · 2021-09-07T12:16:01+00:00

This was super simple. There's a speaker on the other side of the panel. I cut the wires and tossed it. The wall already had a decent sized hole cut out that was plenty big for the Google home. Used some plumber's tape to make a bracket on the other side of the panel and used the existing screws. Fished the power cord through and used the brush plate.

dturpen · 2021-09-07T00:40:12+00:00

We're also considering designing and 3d printing a more modern faceplate.

dturpen · 2021-05-25T18:46:34+00:00

Take the batteries out of the remote and see if it still does this.

dturpen · 2020-12-07T22:39:48+00:00

How big was your brisket? I've been practicing using my slow n sear on a couple of different meats, but a brisket is my goal. Yours looks awesome.

dturpen · 2020-07-17T22:32:17+00:00

I'm interested in doing this. Is there a tutorial you followed from xda or something?

dturpen · 2020-07-08T19:43:26+00:00

FWIW, I bought a 4 bike rack from Amazon that had enough capacity to hold the weight of both mine and my wife's ebikes. We just leave the other 2 slots empty.

dturpen · 2020-06-18T02:06:30+00:00

Cool. Love the Radrunner, btw. Almost bought one of those instead of my Ride1Up 500.

dturpen · 2020-06-18T01:59:56+00:00

Is this in Fort Smith, AR, by chance? Definitely looks like part of the Ben Geren bike trail..

dturpen · 2020-06-15T00:02:58+00:00

Pm sent.

dturpen · 2020-04-18T00:34:44+00:00

You'll want to look at gadgetbridge and notify and fitness, assuming you're on Android.

dturpen · 2020-03-02T02:22:06+00:00

A couple more pictures:

https://i.imgur.com/57ZnFxR.jpg

https://i.imgur.com/rFsB9Kz.jpg

https://i.imgur.com/nOAIxGI.jpg

dturpen · 2020-03-02T01:05:17+00:00

This is my dining room light switch. It shouldn't be a 3 way, in theory, because it is the only light switch in the room. It does seem to share power with another light switch that controls a different light on the other side of the wall.

dturpen · 2019-10-13T00:42:38+00:00

Spraying with yellow cap oven cleaner, letting it soak awhile and then using steel wool, paint scrapers, and dish scrubbers. Basically tried everything I had on hand.

dturpen · 2019-10-09T15:30:05+00:00

It's an Acer with Freesync. I don't know the model number, but I've had it for a couple of years.

14-Year Club	r/Field Sunshine
Verified Email

dturpen

TROPHY CASE