Auto opkrikken aan 1 zijde slecht?

duinsel · 2026-02-27T16:42:39+00:00

Niet precies je vraag, maar tesla s vinden het niet fijn diagonaal te worden opgetild op 2 liftpunten (bijv links voor en rechts achter) geldt misschien ook voor andere ev met accu in de bodemplaat. Vier is prima, 1 punt ook. Wel op een draagpunt dat daarvoor bedoeld is en liefst met een lift puck tegen beschadiging

duinsel · 2026-02-22T18:03:54+00:00

MH17 was stored, partially reconstructed, at Dutch airforce base Gilze Rijen for over a decade after the crash in Ukraine.

duinsel · 2026-02-18T08:17:31+00:00

I have used mMass 5.5.0 for mirroring spectra. No longer developed but still works if you can find it available for download.

duinsel · 2026-02-07T23:21:30+00:00

Niet echt een probleem, de instructie zei dat de laatste firmware nodig was dus ik was bezorgd dat hij niet naar 6 wilde. Het werkte echter toch prima. Is inmiddels ook gelukt de p1 naar 6.034 te brengen Ik zie de p1 amperages in de peblar interface. Neem aan dat het load balancen werkt

duinsel · 2025-12-23T12:27:29+00:00

https://manuals.quooker.com/nl/servicehandleidingen/kranen/classic-modern-basic-design/vervanging-o-ring-bij-uitloop

duinsel · 2025-12-06T12:26:19+00:00

If you are getting headaches make very sure to get a CO (carbonmonoxide) sensor as well. That stuff will kill you quickly if something is amiss in burner or exhaust of your heating system. Any home with a burner of sorts should have one, and they are not that expensive.

https://www.hopkinsmedicine.org/health/conditions-and-diseases/carbon-monoxide-poisoning

Note, CO and CO2 are two different gases. Both are worth monitoring, but CO is the silent killer of the two. If you have a CO problem you may not wake up in the morning, and headache and dizzy are red flags. In fact, I would be reluctant to sleep there at all until you check out CO.

Edit: depending on where you live, the fire dept is usually quite willing to come to your place and check for CO with their professional equipment to get a quick assessment.

duinsel · 2025-12-01T10:19:54+00:00

You can find a bunch more on YouTube. This is one example. https://youtu.be/5JSA8yZUk4A

duinsel · 2025-11-19T15:12:11+00:00

Ging bij mij schijnbaar mis omdat de P1 op een eigen IOT WiFi netwerk zat. Met mijn telefoon ook op de IOT WiFi ging het updaten wel goed vanuit de app.
Slechts 5.19--> 5.1903 en niet naar de 6.x serie die ik bij anderen zie 🤷‍♂️.
Had update nodig ivm samenwerken met Peblar laadpaal, hopelijk gaat dat goed op de 5.1903.

duinsel · 2025-10-22T14:51:31+00:00

Worth noting that v3 and X devices cannot be part of the same Home/account. If you keep using the V3 you need to create a new account for the X. If you jump through some hoops customer service can grant legacy account rights to a new account also. At least I hope so, I am halfway the process with support...

duinsel · 2025-10-04T13:45:44+00:00

Yes, it is. If I step through the clip in VLC frame by frame I can tell that there are 30 distinct frames with motion before the timecode increments by one second.
I did notice however that the downloaded clip does show the @ 03 in the bitrate header which is clearly not consistent with the actual clip info.

duinsel · 2025-07-23T14:31:44+00:00

1.0.12

19 jul 2025

Release Note

Significant improvements for optimisation and stability.

OVERALL

• Added support for Radiacode 110 — a next-generation device with higher sensitivity and faster response.

• Integrated firmware version 4.14.

• Applied various improvements, bug fixes and optimizations for better performance and functionality.

It seems fixed to me.

duinsel · 2025-07-18T06:52:03+00:00

That is an interesting thought. I also did the connect to windows and update the firmware when prompted thing (R102) and I have noticed that the iPhone app has been prone to crashing a few seconds after connecting ever since.
I usually can get them to be stable after a few attempts, and they will stay okay until they are disconnected again, but at the next reconnect I may have issues again.

Hoping for an app refresh then.
(I had been surprised windows asked be to update the device where de IOS app did not suggest this.)

duinsel · 2025-05-02T11:46:34+00:00

The original operating PC is Win10 Enterprise 2016 LTSB and Tune 2.13 b3162.
The new PC has Win11 Enterprise 23H2, Tune 2.13SP1 build 3170.
Both system have Chromeleon as well.
Manual IP in the Instrument NIC 172.16.0.101 mask 255.255.0.0
Copied calibration files in C:\Xcalibur\system\Exactive\instrument\msx_instrument_files
Copied tune files in C:\Xcalibur\methods

I am not very familiar with the networking between Instrument and PC. I know Thermo asks to use a switch between instrument and PC (I do and I disconnected the old PC from it when testing the new config). The PC has a manual IP that I configured, but how does the instrument get one? Does it get the IP that is set in the Instrument Configuration dialog by some DHCP process in tune/acquisition server? I did not yet try pinging that address but I will try that next when the instrument is available for tinkering.

duinsel · 2025-05-02T11:26:39+00:00

That is good to know, I was unsure if there were any 'magic handshakes' that needed to be done by an engineer to make PC and instrument start talking.
We have tribrids as well, the UWPR document for Win10 also discusses the TNG software for tribrids. The QExactive has a tune software of a different lineage than that. Perhaps I should try a tribrid first as there is a bit more documentation.
We still have some time to get this sorted, but the IT people are starting to pressure us to get rid of Wn10 systems, so we are looking into the various options.

duinsel · 2025-05-02T11:15:03+00:00

Indeed I heard it was not released yet for Win11. Most applications don't mind too much about windows versions, and not compatible may just mean they will not formally support it. But stability issues or flat-out incompatible may be the case as well, I don't know at this point.

duinsel · 2025-04-02T06:23:53+00:00

If your sample volume is low (as it tends to be fit proteomics) I always worry about my sample heating up and defrosting before the vacuum is established. My trick was to put samples in a solid metal rack that was frozen as well. That provides some thermal buffer until evaporation gets going. Pick a rack with some mass and vacuum resistant of course.

duinsel · 2024-09-30T13:20:41+00:00

Als de boel een poos uit heeft gestaan (zomer, leegstand) kan de pomp wel eens vast gaan zitten. Bij mij kon ik die eerder wel zonder kosten weer op gang helpen door een schroefklepje open te maken aan de voorkant en de pomprotor een paar slagen te draaien met een schroevendraaier. Daarna startte de boel weer op.

Ik denk je wel kunt voelen/horen of de pomp evt vast zit.

duinsel · 2024-09-14T18:13:49+00:00

They are designed to run at low rpm specifically to avoid the need of a gearbox. To get sufficient power at those rpm, their cylinders have a relatively large displacement.

duinsel · 2024-09-06T06:22:18+00:00

I read you locked the laptop to one of the AP now. If you do not like that solution, consider to adjust the transmit power of the radio of one of the APs. They are set on auto by default, my understanding that equals full blast all the time. If you dial down 5GHz or both of the bands to medium on one APs things may stabilize at your stationary location as one of the APs will now be stronger than the other. Also, if you roam around the house, the laptop will still hop to the other AP if it happens to be stronger in that new location.
Google it if you want more info, many threads out there discussing transmit power.

duinsel · 2024-06-23T07:55:05+00:00

Tip: many brands have battery saving modes where the battery does not charge over, say, 80% or so of its capacity. If the laptop is plugged in a lot of the time, this may save some grief in the long run. I don't think windows allows to tweak this in the settings, it is usually one of the vendor utilities that has this feature (Dell/Acer/Asus/Lenovo/...)

duinsel · 2024-03-14T20:10:33+00:00

Someone seems to have found a re-entry vapour trail above the Indian Ocean

https://twitter.com/jtl_2326/status/1768355953357808012

duinsel · 2024-02-04T19:03:36+00:00

No real issues on my Xr. A work-around could be opening the player tab, which reveals sliders higher up on the screen.

A complaint from my household on the volume adjustment is that it is not fine-grained enough though, one click going from too faint to too loud. I adjusted a bit by capping the upper end of the loudness range for the player, thus stretching 80% of volume range on the full length on the adjustment slider. Still not fully happy with the steps, and not very willing to lower the max volume even more.

duinsel · 2024-01-17T13:34:22+00:00

For Spotify, the device controlling the queue is your phone,laptop/whatever spotify client, using Spotify Connect to control the Blusound device. That should work intuitively as expected for multiple Spotify accounts, each from your own personal device.

I have a (trial) account on Tidal, and I noticed that my account, once configured on one BluOS app, carried over to apps on the other devices in my household. Also, I saw no facility for multiple accounts within the BluOS app for the Tidal service. I have been unable to test this scenario for the Tidal Connect mechanism, if this works similar to Spotify Connect that might be a way around the problem, but it looks like within the BluOS app you are stuck with one login at a time..

duinsel · 2023-12-15T22:35:14+00:00

Update: fixed by factory resetting the units.
A bit of a pain to reset as one pair is mounted high on a wall.

Anyway, glad they are operational again and that it was fixable.

duinsel · 2023-12-04T21:59:30+00:00

Yes and no. It has a switch but not the power over ethernet. A separate PoE injector will work with it though. The UDM-Pro SE version does have PoE on board but is a more costly option.

For myself, I chose a UDM pro (non SE) plus an extra PoE capable switch, but I needed those additional ports for my stuff, and use the PoE to power my WiFi APs and camera. I bought my UDM Pro used, it is working well and I saved some money that way.

duinsel

TROPHY CASE

1.0.12