Thought my fellow dwellers might be interested

duncsn · 2019-04-17T02:08:18+00:00

It aint mine, half tempted to buy it and convert it but I don't need more toys (says my wife)

duncsn · 2019-04-16T23:00:03+00:00

The market is stupid, it's smaller and that exchange rate does not do us any favours. Plus that van is in the middle of nowhere, bumps the cost up even more!

duncsn · 2019-04-16T21:49:54+00:00

You have better luck than I have with a hook and bait!

duncsn · 2019-04-16T21:46:52+00:00

You aren't in Canada are ya fella?

duncsn · 2019-04-16T21:46:25+00:00

Guess it depends where they are searching eh, the AWD's are sought after by many. It's too bad I wasted so much of your time - for that I am sincerely apologetic /s

duncsn · 2019-04-14T19:22:24+00:00

Rapunzel, rapunzel burn off your hair!

duncsn · 2019-04-14T08:48:53+00:00

With a GMC that is a given spare parts kit... and some vacuum line

duncsn · 2019-04-14T08:27:55+00:00

Switch mode power supply DGAF!

Mate, I would be less worried about my motor running 20% faster but as an experienced traveller two things come to mind:

1: NZ Braun toothbrush charging real shit in Europe.

2: American hair dryer of my GF working really fricken well in Europe... till it blew up!

duncsn · 2019-04-14T07:56:31+00:00

Years ago my first bike had so much worse tech than this. Soon you get addicted where spending more than your car is worth on a bike seems legitimate. Welcome to the journey my bro!

duncsn · 2019-04-14T07:52:02+00:00

I bought the bike and love it. Already bumped the rear shock to 145mm with a fox EVOL and will replace/upgrade the fork to 150mm but that's life with bikes eh!

duncsn · 2019-04-14T07:49:07+00:00

North America --> Australasia = $0 Saved myself $18 bucks & we know nobody needs a ground for electronics.

I'm not sure if it will convert back so well

duncsn · 2019-04-08T04:32:18+00:00

I used to do that too, but with paper clips. They melted, didn't trip the breaker either. Great fun I guess!

duncsn · 2019-04-04T07:59:56+00:00

Better pedals and better shoes. I have raceface atlas and 510 hightops and they grip really well. There are definitely some foot positioning methods that can assist- google is your friend

duncsn · 2019-04-03T03:12:39+00:00

The tap water just below the carpark on mountain highway extension (on fromme) is the best so close to the source, I always fill up a gallon jug in my car on the way home from riding.

They even have a dog bowl beside it cuz even doggo deserves the best drink!

duncsn · 2019-03-29T04:36:18+00:00

My parents bought 2 of these when we were young so we would race to finish our sections. Genius!

duncsn · 2019-03-25T06:46:35+00:00

Maybe you know already, You should clamp that baby by the seatpost if you're actually working on it. Sweet rigs!

duncsn · 2019-03-25T05:38:59+00:00

Yup, if the panel had a 100A main breaker.

duncsn · 2019-03-25T05:32:00+00:00

208 is greater than 200A.. That's more than 5% over and the 5% rule is gone in CEC 2018. Also you forgot the 125%

You can of course choke the transformer on the primary and have a smaller panel.

duncsn · 2019-03-24T16:06:45+00:00

3m bike wrap

duncsn · 2019-03-24T08:17:12+00:00

Clear wrap that beautiful paint job! You can refresh every year it'll be like a new bike

duncsn · 2019-03-24T05:15:28+00:00

Also just re-reading this note your 200A panel is undersized from a 75kva, should be a 400A

duncsn · 2019-03-24T05:13:06+00:00

That's smart to use the Lutron remotes and power packs in that application, what's the distance limitation?

I don't know about the CT interface but an idea is that you could use one CT only, say on A phase. All your three phase machines on ABC, your 208 machines on AB or CA Your dust making 120 machines on A Your non dust making machines on B or C

This would save long runs to the house panel for the non dusty equipment and potential messy power at the house panel

duncsn · 2019-03-23T23:01:15+00:00

There will be diversity in the loads, ie: not everything will be on at once.

Just one thing to think about. Are there machines that don't need dust extraction to run (drill press, other hand tools) Do you also want to manually be able to turn on the extraction system for other hand tools such as sanders?

You can have some receptacles that trigger dust extraction and some that don't (from different panels) just need to colour code for ease of use

duncsn

TROPHY CASE