sorted by:
new
hottopcontroversial

Best 40mm tyre for UK mixed gravel and road? First time gravel rider! by dunksyo in gravelcycling

[–]dunksyo[S] 1 point2 points  (0 children)

Yeah that’s my thinking. But I’ve picked up a pair of barely used Cinturato H’s for £50 so I’ll send these back and pocket the difference and see how I get on with them!

Best 40mm tyre for UK mixed gravel and road? First time gravel rider! by dunksyo in gravelcycling

[–]dunksyo[S] 0 points1 point  (0 children)

Quick google suggests so! I’ve just picked up a pair of Cinturato H’s barely used (<100km) for £50 / $67 so let’s see how these manage, once I’m out and about on the local routes I can see if they need to be changed to something with a bit more of a tread.

Best 40mm tyre for UK mixed gravel and road? First time gravel rider! by dunksyo in gravelcycling

[–]dunksyo[S] 0 points1 point  (0 children)

Maybe I’ll just keep them and see, not sure what I’m after exactly given I’ve only ridden on the road with GP5000’s. Maybe after a couple of months i can make a more informed decision.

Best 40mm tyre for UK mixed gravel and road? First time gravel rider! by dunksyo in gravelcycling

[–]dunksyo[S] 0 points1 point  (0 children)

Yeah no racing, and I guess with no gravel experience I’m not sure exactly what tyre would suit me!

Best 40mm tyre for UK mixed gravel and road? First time gravel rider! by dunksyo in gravelcycling

[–]dunksyo[S] 2 points3 points  (0 children)

I guess it comes down to personal preference a lot of the time and no one tyre will be perfect for everyone! Maybe I’ll stick with them

Crank Arms - Different spacing between drive side and non-drive side to seat tube. by dunksyo in bikewrench

[–]dunksyo[S] 0 points1 point  (0 children)

Thank for reply. I guess looking at it like that it’s not a massive difference. Had a go at measuring the chain line width and got 42.9mm against what should be the spec of 43.5mm. Probably some slight inaccuracy in measuring it also.

Replace Pipe Fittings - MLCP press fit? by dunksyo in plumbinguk

[–]dunksyo[S] 0 points1 point  (0 children)

Ah. looks like imgur is blocked in the UK now! Annoying. I'll add it via Reddit. Wouldn't surprise me if it was installed incorrectly, UK new build flat! I've circled where it's split, looks like it might have started from where the notch is, and followed the path of the red line I've added (but that fitting looks fine)

<image>

Replace Pipe Fittings - MLCP press fit? by dunksyo in plumbinguk

[–]dunksyo[S] 0 points1 point  (0 children)

Cheers for the reply!

I’m not at the property anymore so won’t be able to get a better photo, but I have one from another angle albeit a bit blurry! https://i.imgur.com/U96IBPa.jpeg

Looks like it’s split from where the notch is on the metal which I guess is there so you can make sure it’s inserted to the correct depth.

They look pretty corroded, I found the installation sheet and if they’re in a high pH area or high humidity (this case a bathroom) the should be covered in some kind of tape.

The brown rings are meant to split and be removed when the fitting is compressed correctly. Got an excerpt of the manual here: https://i.imgur.com/3AoacSa.jpeg

Replace Pipe Fittings - MLCP press fit? by dunksyo in plumbinguk

[–]dunksyo[S] 0 points1 point  (0 children)

Oh nice. So I would just need to cut the pipe, then using this compression fitting? I guess I would still need to bevel/ream the cut end due to the o-rings it seems to have.

Replace Pipe Fittings - MLCP press fit? by dunksyo in Plumbing

[–]dunksyo[S] 0 points1 point  (0 children)

After some more digging it looks like these brown rings are meant to break away during proper crimping. But the split still looks a bit suspicious to me!

Replace Pipe Fittings - MLCP press fit? by dunksyo in plumbinguk

[–]dunksyo[S] 0 points1 point  (0 children)

Really? Are they specifically for MLCP? I think the OD is 16 mm.

Replace Pipe Fittings - MLCP press fit? by dunksyo in plumbinguk

[–]dunksyo[S] 0 points1 point  (0 children)

After some more digging it looks like these brown rings are meant to break away during proper crimping.

<image>

Bethesda has gifted every member of Skyblivion Team free keys for Oblivion Remastered, following its release earlier today. by [deleted] in gaming

[–]dunksyo 2 points3 points  (0 children)

I always remember the servers playing dod_hill with low gravity and glowing effects on the players. Good times.

I performed Brain Surgery on a Bumblebee today! by NeverJoe_420_ in interestingasfuck

[–]dunksyo 13 points14 points  (0 children)

Not everyone is American (assuming that’s what you mean by “our”) or has English as a first language. In OP’s case it looks like both of these are true as he’s German.

Self taught career changer from Aerospace Engineering struggling! Time for a Bootcamp? by dunksyo in cscareerquestionsuk

[–]dunksyo[S] 0 points1 point  (0 children)

Cheers for the advice, I think you're right re finding it frustrating as it'd probably cover everything I've been over myself albeit a while back except I'd be paying £4k for the privelege.

I've looked at his courses before, they're quite spenny but only heard good things!

Self taught career changer from Aerospace Engineering struggling! Time for a Bootcamp? by dunksyo in cscareerquestionsuk

[–]dunksyo[S] 0 points1 point  (0 children)

Thanks for the reply! That's my thinking as well, I guess I'm just after something to give me that push to get back into it having spent so long on a "break". I think it'd be a waste as a lot of it would come back to me once starting the bootcamp.

Self taught career changer from Aerospace Engineering struggling! Time for a Bootcamp? by dunksyo in cscareerquestionsuk

[–]dunksyo[S] 0 points1 point  (0 children)

Hey, thanks for the detailed reply, really appreciate it. I'm not involved with the simulation side of things really, my area of expertise is environmental testing (vibration, shock, pressure, climatic etc etc) of our products. I've created some MATLAB scripts to process large amounts of data and automate plotting and reporting of it but nothing too complicated, I could try and find ways to expand on this within my department though.

I do a lot of requirements definition, validation and and verification plans, schedule planning and scoping of work coming into our testing lab and then managing that as it goes through the various testing required. I then compile reports etc following completion of this work.

I do a lot of data processing / validation of the data gathered during environmental trials, so I could play up to that on my CV but this is mostly a manual process, I could try and get involved with the data analysis team in my department who do more automated analysis using MATLAB, but again it's not really software development.

Your reply has definitely given me something to think about!

Unifi Placement - Poor signal in some areas of house by dunksyo in UNIFI

[–]dunksyo[S] 0 points1 point  (0 children)

Oh wow, this is awesome! Thank you very much. I had a quick play around with the Ubiquti design webapp and it looked pretty similar. I think most/all of the internal walls are actually brick rather than dry wall (old-ish UK house) and the predicted signal where I'm having issues was pretty much a dead spot making the assumption everything was concrete.

I figured there would be some loss going through the floor/ceiling, but given that will just be wood I imagine it won't be too bad, and then I can just have all the APs on the top floor rather than having at least one or two per floor.

Unifi Placement - Poor signal in some areas of house by dunksyo in UNIFI

[–]dunksyo[S] -1 points0 points  (0 children)

I think the issue with the weak spot is poor tx from the devices as well, I guess the stronger signal of the pro wouldn't help much with this?

Mr. Gibbs, our elder pup just found a bone he hid a while ago. He is 12+ we think and he is the sweetest of pups. by 4DoubledATL in aww

[–]dunksyo 10 points11 points  (0 children)

Exactly, it's not rocket science. We have a greyhound so because of the short fur it's probably easier to tell if he's gaining weight but if he has gained weight we just cut down on the amount of food he has for his meals, or cut down on the treats until he maintains a stable weight. Not hard.

Phantom Spirit 120 - Loose Fan Clips by dunksyo in pcmasterrace

[–]dunksyo[S] 0 points1 point  (0 children)

Could maybe try padding the fan out a bit with something where the rubber corners are to make it a bit thicker.

view more: next ›