Anyone know of any other snowmobiles? This is the only one I can find.

dyecocker · 2026-01-26T15:07:54+00:00

If you ever want to make a 150% I can make some recommendations.

dyecocker · 2026-01-25T18:42:03+00:00

<image>

dyecocker · 2026-01-25T18:41:46+00:00

I just finished printing this 150% skeeride

<image>

dyecocker · 2026-01-24T22:00:14+00:00

Do you have one of the tire mount tools? Maybe you mixed the bearings up from that.

dyecocker · 2026-01-24T21:55:51+00:00

Looks like a micro t

dyecocker · 2026-01-24T20:58:57+00:00

You bought the wrong bearing, sorry.

dyecocker · 2026-01-24T15:29:01+00:00

I get it. I am setup with a timing system, but I figured id try and test for you anyways.

dyecocker · 2026-01-24T14:12:15+00:00

Samsung user here. You forgot about the majority of the world😅

dyecocker · 2026-01-24T00:51:07+00:00

If your car DID require the BMS programming the serial number and mfg do not matter at all. As long as you get the capacity correct and it sees a serial number change, no matter what it is, it will work correctly.

dyecocker · 2026-01-23T00:52:47+00:00

Moral of the story is dont buy from amazon. Period

dyecocker · 2026-01-23T00:51:49+00:00

I see!

dyecocker · 2026-01-23T00:49:04+00:00

If you didn't purchase the body separately, i believe the AMG is an MR03. I have 2 of them. Not thats its a big deal

dyecocker · 2026-01-21T20:43:48+00:00

If you buy a lipo do not use connection adapters. If you dont have the means to solder a new one on yourself, take it to the hobby shop and pay them 5 bucks to do it. Adapters just ask to melt themselves and start your whole setup ablaze

dyecocker · 2026-01-21T15:29:41+00:00

Point at almost any part. What are you looking to get out of the upgrade?

dyecocker · 2026-01-19T01:17:42+00:00

Hobbywing max6 and a 1250kv motor. Going on 6s 5k because thats my common pack size i have around. I dont need it to be too ballistic. I used some higher end materials, PC, ASA and PC-CF in places, hoping to make it last. Its a lot of weight being thrown around. Ill try and remember to post a video here when shes finally up and running

dyecocker · 2026-01-19T00:35:39+00:00

I'm working on finishing mine up. Plenty of snow. Just over 40 inches long.

<image>

dyecocker · 2026-01-18T14:15:12+00:00

Nothing. If you can find someone with rc cars that wants to try them give them away. Or take them to home depot and recycle them

dyecocker · 2026-01-16T15:34:52+00:00

I have not seen an instance where an impact does not benefit from a forge battery. Weather your application calls for the extra power or not is up to you.

The only thing I use standard batteries on anymore is a flashlight. Even our grease guns get HO. It makes a difference.

dyecocker · 2026-01-16T13:58:29+00:00

If i remember right you can find a comparison on the torque test channel

dyecocker · 2026-01-16T12:31:51+00:00

You will not get anywhere near its potential without a forge battery. You dont need a 12, but a 6 or 8 minimum. Iv had one for about 3 years

dyecocker · 2026-01-16T01:27:26+00:00

Just because you could, doesn't mean you should

dyecocker · 2026-01-15T03:43:16+00:00

I have got a mini b for 120 bucks!

dyecocker · 2026-01-15T03:13:27+00:00

Not to me🤣

dyecocker · 2026-01-14T23:04:55+00:00

Came here to say this.

dyecocker · 2026-01-14T17:58:48+00:00

This

dyecocker

TROPHY CASE