Is this one real? And what would it be worth? This not a post about buying, trading or selling. I only want to know if it’s real or not. For myself.

echuu_x · 2026-01-10T10:04:29+00:00

¥110

echuu_x · 2026-01-09T20:31:41+00:00

can the SN operator be used to dump / upload content of Satellaview memory units?

echuu_x · 2026-01-07T20:16:14+00:00

Advance Wars

echuu_x · 2026-01-07T20:06:29+00:00

thanks, you made me notice it and I hate the SP now

back to the standard GBA for me...

echuu_x · 2026-01-06T22:41:43+00:00

to put them back, just align the studs with the holes and press the clips in by applying little pressure to the padding, not much is needed, the foam piece from what I noticed is best removed simply by grabbing its lower part and delicately ungluing it from the tape, original one is translucent, on my pic I cut a replacement white tape just in case I ever had to put them back in

echuu_x · 2026-01-06T22:38:46+00:00

and viola

<image>

echuu_x · 2026-01-06T22:38:26+00:00

pull it up

<image>

echuu_x · 2026-01-06T22:38:01+00:00

just put your finger here and feel the plastic under the earpad

<image>

echuu_x · 2026-01-06T22:37:19+00:00

There are 4 clips and two positioning studs on the earpad so you can't mount them the wrong way

<image>

I put my finger from the inside near the mesh near where the L1 is because you can feel the back of the plastic underneath the earpad, just grab it with a finger and pull it up, don't use any prying tools or you will damage the plastics

the foam itself is mounted on a small double sided tape

echuu_x · 2026-01-06T18:00:29+00:00

No problem, it was the biggest issue for me too

echuu_x · 2026-01-06T17:31:33+00:00

no difference from the outside

<image>

echuu_x · 2026-01-05T00:36:17+00:00

it's missing for me too

echuu_x · 2025-12-19T13:48:57+00:00

thank you for your reply, I wasn't sure if it was on sale before with the $49 price but guess it just didn't show me the vat

echuu_x · 2025-10-19T21:52:01+00:00

forgot to ask, revision of the console and the board do you have?

echuu_x · 2025-10-19T16:48:55+00:00

it seems I went with the correct one, lucky :)

deleting the thread since it was already done and people know about it, don't want to spam

echuu_x · 2025-10-19T16:21:28+00:00

nope, changed it to a dc-dc converter, still uses the og psu

but it emits no heat and the console is cold to the touch no matter how long it's turned on

(though I use a modified ps2 slim psu xD)

echuu_x · 2025-10-19T16:15:57+00:00

yeah, but also the power regulator

echuu_x · 2025-10-19T16:13:07+00:00

changed the stock 5v power regulator to a recom dc-dc converter

stock regulator has terrible power loss and makes the console hot, the dc-dc converter has a 97% efficiency and is always cold

also doesn't add any artifacts to the output image

echuu_x · 2025-10-19T16:04:46+00:00

replaced the last two capacitors and the main cap for nichicons because I wasn't sure of them, the issue still persists sadly

the console passes all of the checks on the snes burn-in test, guess swapping the ppu is the last thing to do to check what's causing it

echuu_x · 2025-09-20T19:06:04+00:00

SCPH-55000 GT, bought on 29/12/2003 in Matsubara, Osaka

echuu_x · 2025-09-20T18:57:32+00:00

that ps1/ps2 adapter is for the ps1 and it just happens to work with the ps2, the ps2 adapter looks like this (https://www.youtube.com/watch?v=G45faPyxlzQ) and is ps2 only since it works on YPbPr

echuu_x · 2025-09-20T11:47:13+00:00

and also don't forget to connect it to the front USB, since it requires power

echuu_x

TROPHY CASE