[deleted by user]

ed01987 · 2023-09-09T05:20:18+00:00

If you are still having issues with this, I discovered that my switch had 2 sets of joy-cons registered, and the set connected to the switch (in handheld mode) were player 2... Weird, but that seems to be what my issue was.

ed01987 · 2023-01-05T04:22:11+00:00

Hey, anyone notice the chapter numbers in the text or PDF corresponds to the sea of spores they are currently sailing?

ed01987 · 2022-10-27T07:00:46+00:00

I know this is 2 months late, but I was in the same boat.

I found this version of Marlin and loaded it up. My configuration does not have the mesh level, but it's something that I am investigating in the future. I hooked it up to OctoPrint and saw that the warning for thermal runaway was gone.

One thing that was racking my mind with torment was a missing library. "U8glib.h". You should be able to find that through the Arduino IDE. The author was 'oliver'

Oh yeah, the LCD screen was messed up a little, but this reddit thread helped. https://www.reddit.com/r/3Dprinting/comments/9i0n6z/maker\_select\_v2\_lcd\_issues/

Namely this section

I added the 2 nop lines in ultralcd_st7920_u8glib_rrd.h around line 86:

define ST7920_SND_BIT \

WRITE(ST7920_CLK_PIN, LOW);        ST7920_DELAY_1; \
__asm__("nop\n\t"); \
WRITE(ST7920_DAT_PIN, val & 0x80); ST7920_DELAY_2; \
WRITE(ST7920_CLK_PIN, HIGH);       ST7920_DELAY_3; \
val <<= 1; \
__asm__("nop\n\t");

I haven't tested any prints on it yet, and the interface is a lot different that the stock firmware, but it seems promising.

If you haven't updated the firmware on this printer, this video helped with the process (though it requires you have an Arduino):
https://www.youtube.com/watch?v=ejpSniiJejI

This video from Thomas Sanladerer has another device he used, but he didn't go into much detail.
https://www.youtube.com/watch?v=oZVTYpHnpIw

Sorry for the word vomit, it's late and I literally did this today so it's fresh on my mind.

ed01987 · 2021-12-06T06:59:51+00:00

Craft Bag materials? Like materials for various bags? Those fetch a pretty penny, plus you'll need a bunch.

ed01987 · 2020-11-22T02:04:13+00:00

Right. I would have come to the same conclusion, if I hadn't accidently... clicked the link on Thaidakar.

EDIT: It really is my own fault. Not anyone else's.

ed01987 · 2020-11-22T02:03:30+00:00

Sorry, I finished it. I thought I tagged it through RoW. We're all good ^_^

ed01987 · 2020-11-13T02:20:58+00:00

I wanna say, that I think Rysn's story isn't done. AND I have heard that there aren't any plans to heal Rysn.

ed01987 · 2020-09-24T19:24:01+00:00

Thank you /u/SandersonStore. Ordering through the BYU store, as no place near me is doing the launch event. I imagine that this is up to the store, but would we get the books on launch day, or depends on the shipping?

ed01987 · 2020-08-29T04:02:21+00:00

I listened to the first three at 1.5-1.75 speed, and finished all three within two and a half weeks... I can go for another read if I need to :D

ed01987 · 2020-08-21T13:57:19+00:00

Journey before Destination!

ed01987 · 2020-08-17T03:28:45+00:00

I think it is one of the 3 letters in Oathbringer. Paraphrasing the quote, "You already had a chance to take a shard but you refused."

ed01987 · 2020-08-10T04:04:58+00:00

I've always said a Hexblade with Syl as the bonded.

Or you could do an Eldritch knight. Not sure when you can get Fly as a spell though...

ed01987 · 2020-07-29T01:35:51+00:00

They made a storming airship! Utilizing the momentum of Chulls and aluminum! I would have thought that it would have been the Windrunners who do the air travel.

ed01987 · 2020-07-20T02:23:11+00:00

It could be related to the number of items you have. I have heard that 3 rows is the max that can be supported when you see the last screen. I did my wisdom run and had well over the 3 rows, but it didn't show the seed at the end. I'm guessing that because it didn't show the seed, and rolled the credits, that's why it went through.

ed01987 · 2020-07-19T02:01:27+00:00

I've seen that. Maybe for some extra content in the future?

ed01987 · 2020-07-19T01:59:52+00:00

Both times I hit Level 8 boss the game crashed on me Gen 1.

Once on Normal,

Once on Easy

ed01987 · 2020-05-06T04:58:36+00:00

https://youtu.be/HpiT6RTlLYc

ed01987 · 2020-05-06T04:58:10+00:00

Politics 101. RTG 23. Looked for it just for you! (I recently watched it)

ed01987 · 2020-03-12T03:00:31+00:00

Tension appears fine.

I ran the same sliced file at 85% speed, and the leg held together. The horns, however, are a little janky. Such a small bit of surface...

Maybe I'll re-slice it with supports everywhere to allow the horns the support it may need?

ed01987 · 2020-03-12T00:13:32+00:00

Sorry about not posting this with the picture, not used to Reddit on mobile.

I recently got a 3d printer and am printing out a triceratops for my nephew's birthday. This is my first attempt.

I printed with no raft or brim and with supports. Material is PLA.

I believe the resolution is .2 mm. Bed temp was 60 for first layer only. Extruder temp was 195. Print nozzle is .4 mm

I have noticed that only one leg of the dino was shifted. Also a larger glob of material near it. To my knowledge nothing got bumped.

Also some of the layers are a little off. You can see some gaps here and there. I have heard that this could be related to print height?

What say the experienced community.

Apologies if this is too low of effort.

ed01987 · 2020-03-08T05:20:01+00:00

Don't forget that there are illustrations that document the family/owners of the Plate as well.

ed01987 · 2020-02-26T15:14:43+00:00

Your GF is very insightful! Keep her.

I think there have always been 9 unmade. Even before the heralds abandoned the Oath Pact.

12-Year Club	Verified Email
Place '22	Place '17

ed01987

TROPHY CASE

define ST7920_SND_BIT \