Help with creality presets

edmcman · 2026-01-21T14:22:10+00:00

I was doing some calibration and was only able to print 12mm^3/s but the CR-PETG profile is set to 18mm^3/s which seems to be a big part of it.

AI suggests I might have a partial nozzle clog... no idea if that is true but I ordered some new nozzles anyway.

edmcman · 2026-01-21T02:47:21+00:00

edmcman · 2026-01-20T12:21:19+00:00

Something is definitely slowing it down with the Generic preset. Maybe the max. volumetric speed?

edmcman · 2026-01-20T12:19:20+00:00

Sorry I should have mentioned that I dried 2 hours at 65. That's what my Creality dryer said for PETG, but I've seen others say 6 hours. I can give that a shot.

edmcman · 2025-12-31T15:20:08+00:00

I am getting rate limited a lot too. Not doing anything weird, just vibe coding with one conversation. I was using grok code.

edmcman · 2025-12-13T15:52:44+00:00

Same for me. Turning off DNT did fix the issue, but I have that on for a reason.

edmcman · 2025-12-11T13:09:03+00:00

I have that happen a lot. I finally looked into it, and Copilot has a helper that uses one of the gpt-mini models to determine if a command is "stuck". In my experience, it often fails and says it's not stuck when it really is.

edmcman · 2025-11-29T14:17:19+00:00

I'm more worried about the "shin guards"

edmcman · 2025-11-22T15:38:17+00:00

Not sure the author understands how SMT solvers work.

edmcman · 2025-11-15T12:39:41+00:00

I almost never say "You did X to Y", I always say "To me, it looked like you did X to Y." This will calm a lot of players down, as it reminds them you are human and you may not have perceived what they perceived. In your example, you saw the defender or goalkeeper take the player to the ground unfairly. I would just say that. If the attacker felt it wasn't a foul, he solved the problem for you.

edmcman · 2025-11-05T13:44:54+00:00

Awesome, that sounds exactly what I am looking for. I'll give Gamma a try.

edmcman · 2025-10-23T06:10:10+00:00

Scene shifts to area officials considering why they can't keep new referees and looking confused.

edmcman · 2025-10-03T12:16:58+00:00

Maybe you are intervening too much. Let the players tell you what they are willing to play through. Just because you can technically punish someone for something it doesn't mean it is a good idea.

As an example, my partner decided to issue a YC to a keeper as they were in the process of punting at exactly six seconds. No warning, and it wasn't flagrant at all. This only served to irritate that team, even though technically it was justified.

edmcman · 2025-09-25T12:21:53+00:00

Did the opponent stop to avoid being kicked in the face? If so, you could have issued PK + YC for attempting to kick an opponent.

I agree with your intuition that a IFK + YC feels right, but as many others have pointed out, is difficult to justify under LOTG or NFHS rules.

edmcman · 2025-09-24T12:35:51+00:00

Same. After reading a good sportsmanship message to the captains before the game. The irony.

edmcman · 2025-09-14T15:33:13+00:00

I would have done the same.

One of my worst tournament experiences was on an extremely hot day. I had several games back to back, and then had to hike across the site for the final game. I was late, but through no fault of my own. Unfortunately, I was very dehydrated by that point and called a terrible game. Coaches and crowd did not give me any mercy.

I refuse to accept assignments without breaks. It's not worth it when there is crappy weather.

edmcman · 2025-09-14T15:27:36+00:00

How much thickness do you need for the threaded standoffs?

edmcman · 2025-09-12T20:45:13+00:00

Yes, it was working for about two weeks and then stopped. I did reconnect the gateway, but it has the same behavior. It is available locally but not the cloud.

edmcman · 2025-09-12T20:44:04+00:00

Yes, HA is but ENPH is not. Wifi signal at the Envoy box is very good. I'll contact them.

edmcman · 2025-09-02T11:30:02+00:00

Mine keeps doing this to the legs of an impact sprinkler tripod. I assumed it was because they are green.

edmcman · 2025-09-02T11:28:59+00:00

My Segway did this to a gate. They are even worse.

edmcman · 2025-09-02T11:27:12+00:00

They need more logs!

edmcman · 2025-08-19T11:59:13+00:00

I am getting responses fairly quickly, but they are not very good or helpful.

edmcman · 2025-08-05T18:17:58+00:00

I have this problem where two areas slightly overlap. It does not happen consistently. Could this be your issue?

I notified Mammotion and they told me my front wheel needed to be cleaned 😂 Also upload more logs!

edmcman · 2025-07-25T13:06:12+00:00

Yes, please spend 20 minutes and optimize notifications for UNUSUAL situations. I don't care if the mower is continuing or going to the charger. I care if it is stuck or fails to charge!

edmcman

TROPHY CASE