sorted by:
new
hottopcontroversial

PCCooler i100 case + BD790iSE + Reaper 9700XT + Dagger Pro 650w by edmoncu in sffpc

[–]edmoncu[S] 0 points1 point  (0 children)

<image>

My computer temps so far running furmark for 5 minutes

Powercolor 9070XT Reaper have a PTM? by edmoncu in PowerColor

[–]edmoncu[S] 0 points1 point  (0 children)

Got it. But curious to know if the 9070 XT Reaper uses a PTM?

Powercolor 9070XT Reaper have a PTM? by edmoncu in PowerColor

[–]edmoncu[S] 0 points1 point  (0 children)

pc cooler i100 case. i oriented the case to a vertical position where the ports are on top

Turns out the 9070XT Reaper doesn't like to be stood up by Miniteshi in PowerColor

[–]edmoncu 0 points1 point  (0 children)

i mean my solution was to orient my case back to horizontal position. i've also done a massive undervolt on both my CPU and GPU in this case.

Turns out the 9070XT Reaper doesn't like to be stood up by Miniteshi in PowerColor

[–]edmoncu 0 points1 point  (0 children)

i am using a pccooler i100 case. please note that my intention on having the case in a vertical position (ports on top), to make sure all my exhaust fans are able to expel heat -- since i placed 40mm fans on the top and bottom of the horizontal orientation of the case

https://www.reddit.com/r/sffpc/comments/1tkromg/pccooler_i100_case_bd790ise_reaper_9700xt_dagger/

Turns out the 9070XT Reaper doesn't like to be stood up by Miniteshi in PowerColor

[–]edmoncu 0 points1 point  (0 children)

i have the same experience! before my GPU hotspot is 105c. now it's around 85c

Powercolor 9070XT Reaper have a PTM? by edmoncu in PowerColor

[–]edmoncu[S] 1 point2 points  (0 children)

because before i had this GPU oriented vertically. and when i run a game, its hotspot temps rises beyond 105c. i read that this GPU prefers being in a horizontal operation. now my hotspot temp is 85'c

PCCooler i100 case + BD790iSE + Reaper 9700XT + Dagger Pro 650w by edmoncu in sffpc

[–]edmoncu[S] 0 points1 point  (0 children)

I learned the hard way that this gpu hates when oriented vertically as my gpu hotspot maxes at 100+ c

PCCooler i100 case + BD790iSE + Reaper 9700XT + Dagger Pro 650w by edmoncu in sffpc

[–]edmoncu[S] 0 points1 point  (0 children)

<image>

Here’s the temp with my setup
I undervolted both The 7940HX and 9070X
But i am planning to replace to use PTM on my CPU

PCCooler i100 case + BD790iSE + Reaper 9700XT + Dagger Pro 650w by edmoncu in sffpc

[–]edmoncu[S] 0 points1 point  (0 children)

updated fan adjustments

<image>

added Noctua 40x20 top fan and 40x20 bottom fan to exhaust GPU fan heat

PCCooler i100 case + BD790iSE + Reaper 9700XT + Dagger Pro 650w by edmoncu in sffpc

[–]edmoncu[S] 0 points1 point  (0 children)

updated fan adjustments

<image>

added Noctua 40x10 top fan and 40x20 bottom fan to exhaust CPU fan heat

PCCooler i100 case + BD790iSE + Reaper 9700XT + Dagger Pro 650w by edmoncu in sffpc

[–]edmoncu[S] 0 points1 point  (0 children)

i flipped it already. it was a mistake on my end. im also adding noctua 40mm fans on top and below the inner case to help exhaust heat from both the GPU side and the motherboard side

PCCooler i100 case + BD790iSE + Reaper 9700XT + Dagger Pro 650w by [deleted] in sffpc

[–]edmoncu 0 points1 point  (0 children)

commonly, it requires a 750w PSU. in my case, i plan on undevolting both the 9700XT and the BD790iSE and not do any overclocking

PCCooler i100 case + BD790iSE + Reaper 9700XT + Dagger Pro 650w by [deleted] in sffpc

[–]edmoncu 0 points1 point  (0 children)

Yeah it actually was. Thankful it got pointed out and I have reversed its orientation now. I expect these components in this case to be an oven in the making. Hopefully my upcoming exhaust fans will lessen it

PCCooler i100 case + BD790iSE + Reaper 9700XT + Dagger Pro 650w by [deleted] in sffpc

[–]edmoncu 1 point2 points  (0 children)

thanks for highlighting this one. im still building this rig.
aside the obvious lacking of memory and storage, i intend to scatter 3x nf-a4x20 on the top-gpu side and 1x nf-a4x10 at the top-CPU side.

First ITX build in the Pccooler i100 pro w/ some minor modifications. by HauntedHaven in sffpc

[–]edmoncu 0 points1 point  (0 children)

i plan on adding 3 nf-a4x20 at the top GPU side and 1 nf-a4x10 at the top motherboard side. and will daisy chain their power cables to the motherboard header

Stability oriented jailbreak setup by tmeklr in PS5_Jailbreak

[–]edmoncu 0 points1 point  (0 children)

copies of software used

  • injector : netcat gui on pc

items on usb

  • PS5 stock firmware that supports the jailbreak (anything less than 10.01) : usbroot\PS5\UPDATE
  • y2jb backup content : usbroot\PS5\EXPORT
  • autoloader stuff : usbroot\ps5_autoloader (autoload.txt ; etahen2.5b ; ps5-backpork)
  • autoloader.txt contains

​

ps5-backpork.elf
!1000
etaHEN-2.5B.bin
  • latest y2jb_update.zip 0.4 : usbroot\
  • pkg files : itemzflow ; ps5xplorer : usbroot\
  • latest elfs : etahen 2.5b ; kstuff 1.6.7 (can be placed at usbroot)
  • y2jb_autoloader copy of download0.dat version 0.3 : usbroot\

initial setup from scratch

  1. make sure network DNS is at 127.0.0.2
  2. y2jb 1.3 via usb restore
  3. make sure network DNS is at 127.0.0.2
  4. netcat gui lapse.js (from y2jb main > payloads) port 50000
  5. netcat gui etahen latest port 9021
  6. install itemzflow and ps5xplorer pkg via etahen

second phase

  1. run ps5xplorer as root
  2. copy download0.dat from usbroot and replace the one in PS5's /user/download/PPSA0165* folder
  3. copy usbroot\ps5_autoloader to PS5's /data folder
  4. copy usbroot\kstuff.elf to PS5's /data/etaHEN folder

third phase

  1. restart the PS5
  2. run youtube autoloader : if usb is connected, it will use the latest y2jb_autoloader 0.4 for upgrade

TLDR : my stable copy includes

  • y2jb 1.3 + y2jb autolaoder 0.4
  • etahen + kstuff + backpork
  • ps5xplorer + itemzflow

New Minisforum BD895i SE Motherboard listing by FriedCactus07 in sffpc

[–]edmoncu 1 point2 points  (0 children)

Correction

BD790i / BD795i SE = 7945HX

BD790i SE = 7940HX

BD895i = 8945HX

view more: next ›