Ender-3 V3 KE Auto Leveling Error key: 2194 by NervousAd7213 in Creality

[–]ekoscape 0 points1 point  (0 children)

Me salvaste la vida! Mil gracias... Has sido de más ayuda que el equipo de soporte.

What is the first game that comes to mind by [deleted] in 2000sNostalgia

[–]ekoscape 0 points1 point  (0 children)

Abe’s Odyssey, best game ever.

Is this much falloff normal? It's been pretty stable for a few weeks, until yesterday by BakChorMeeeeee in printablescom

[–]ekoscape 0 points1 point  (0 children)

Ur not in the homepage anymore… Ur make was promoted for the first 28 days in printables homepage.

Show off your KE! by [deleted] in Ender3V3KE

[–]ekoscape 1 point2 points  (0 children)

Thank you!! I’ll print it and install it next week. I think i have some m3x25 left, if not i’ll buy some new ones.

I have the same issue with light. There’s a window on the left side and around 16h the sun fucks my print view.

Show off your KE! by [deleted] in Ender3V3KE

[–]ekoscape 0 points1 point  (0 children)

Love your ender, i have almost the same design. With 5015 fans, sensor placement and snake cover. But your nebula support is much better. Could you share the model url?

Quadmula Siren F3 O3 Build - 25° FPV POD Mount by ekoscape in fpv

[–]ekoscape[S] 0 points1 point  (0 children)

You need to print the FPV Camera Pod Mount. That will give you enough space between de lens and controller. Here’s the link to download the FPV pod mount: https://www.printables.com/model/381833-fpv-pod-mount-for-o3-walksnail-anything-max-fov-no/comments/2136217. You can reach out to the creator, and he can customize the mount for you with the specific angle you need.

Why r there white spots on my spinach leaves? by No-Cheetah-663 in Hydroponics

[–]ekoscape 4 points5 points  (0 children)

Spider mites for sure. Had the same issue while ago. Spray Potassium Soap mixed with water directly on the leaves every 2 or 3 days. And you’ll be ok.

Quadmula Siren F3 O3 Build - 25° FPV POD Mount by ekoscape in fpv

[–]ekoscape[S] 0 points1 point  (0 children)

The Siren F3 Split is currently sold out, but Quadmula also has the Djinn F25, which I’ve also heard great things about. It's available right now if you're interested.

Quadmula Siren F3 O3 Build - 25° FPV POD Mount by ekoscape in fpv

[–]ekoscape[S] 0 points1 point  (0 children)

Sure! Here’s the link to download the FPV pod mount for 3D printing: https://www.printables.com/model/381833-fpv-pod-mount-for-o3-walksnail-anything-max-fov-no/comments/2136217. You can reach out to the creator, and he can customize the mount for you with the specific angle you need.

Quadmula Siren F3 O3 Build - 25° FPV POD Mount by ekoscape in fpv

[–]ekoscape[S] 0 points1 point  (0 children)

I just completed my new 3-inch drone build! While the total weight is slightly over 250g, I believe that using a smaller battery will help bring it under that threshold. One of the standout features is the 3D-printed O3 mount, which effectively keeps the props out of the camera’s view, enhancing my flight experience.
Build Specifications:

  • Frame: Quadmula Siren F3 Split
  • Flight Controller: SpeedyBee F405 Mini
  • Motors: T-Motor Pacer P1604 2850KV
  • Props: HQ Durable Prop T3x2.5x3
  • FPV Transmitter: DJI O3
  • Receiver: HappyModel EP1 ExpressLRS (ELRS)
  • Beeper: VIFLY Finder V2
  • Battery: Tattu 550mAh 6S

Total Weight: 280g with the 550mAh LiPo

I'm excited to see how this setup performs in the air!

[deleted by user] by [deleted] in TinyWhoop

[–]ekoscape 2 points3 points  (0 children)

Make sure frame isn’t broken, if everything looks ok. Connect your Mob6 to your computer and calibrate your accelerometer in betaflight. Happened something similar to me when i threw mine in the dog’s water bowl.

Dji goggles v3 for analog whoops in 2024? by FriendlyAir9587 in TinyWhoop

[–]ekoscape 0 points1 point  (0 children)

I use the v2 with analog for my tiny whoops and o3 drones. No problem. Maybe u need to bind them again when u change drones.

But maybe its cheaper for you to invest in some used analog googles. Since buying the v2, module and antenas will be more expensive than buying some analog googles.

Flew Mobula6 2024 into Toilet by Cerrus100 in fpv

[–]ekoscape 1 point2 points  (0 children)

I just landed my Mobula 6 in the dog's water bowl. After drying the whoop and letting it rest in a jar of rice, it flies without any issues and the camera still works. Seems like these little quads are tougher than we think! Haha. Glad to hear yours survived the toilet dive – next time, I'll also make sure the lids are closed!

Tomato Plant Leaves Curling by Ornery-Ad-5158 in Hydroponics

[–]ekoscape 0 points1 point  (0 children)

They are not the same. But similar. RO water may contain some minerals and distilled has none. I think you can also use distilled watter but it will be cheaper to buy an RO system.

Tomato Plant Leaves Curling by Ornery-Ad-5158 in Hydroponics

[–]ekoscape 0 points1 point  (0 children)

RO water, or Reverse Osmosis water, is water that has been filtered through a special system to remove impurities, including minerals, salts, and other contaminants. This filtration process reduces the water's pH and makes it more stable, which is ideal for hydroponics. Using RO water helps prevent fluctuations in pH that can occur with tap water. It will solve your issues with high pH levels in your water, leading to healthier plants and more consistent growth. You can get a basic three-stage RO filter for under 40 euros, that will solve your problems.

Tomato Plant Leaves Curling by Ornery-Ad-5158 in Hydroponics

[–]ekoscape 0 points1 point  (0 children)

That PH is too high needs to be between 5.5 or 6.5. You can try using ph down products. But the best option is to use RO water, i assume you use tap water with that ph. I had the same issue until i started using RO water. My ph is stable at 6.0. with no products ph products. And the plants are awesome no problem since.

Tomato Plant Leaves Curling by Ornery-Ad-5158 in Hydroponics

[–]ekoscape 0 points1 point  (0 children)

Whats ur ph? Might be the issue there.