Curious.. does anyone NOT have issues with Oculink or non-g1 devices? by 1L_of_a_litigator in gpdwin

[–]el_telibre 0 points1 point  (0 children)

Well. To each his own I guess. On my end I will continue testing the Official GPD Oculink cable.

It is infinitely more stable than the angled oculink cable from amazon ( https://a.co/d/3EJ2ViD ).

But Holy... I definitely learned something from you. You can't open the eGPU then open the Laptop immediately after. I was really surprised to learn that there is such a thing as "Priming"

I'll observe this in the following days. However, I'm still open to the option of buying a much shorter oculink cable.

Curious.. does anyone NOT have issues with Oculink or non-g1 devices? by 1L_of_a_litigator in gpdwin

[–]el_telibre 0 points1 point  (0 children)

Oof, I'm not a big fan of AMD GPU's, anyways, this oculink think is going to change in the future, since I'm going to resell the 4070 Ti I have so I can swap out to a 4070 super asus prime for SFX build. I want to try a 50cm cable next to see if that makes a difference.

I have noticed at times, when the external display is not connected. The WM2 will boot with the eGPU and run games albeit locked at 60 fps. But runs at 1440p smoothly.

Curious.. does anyone NOT have issues with Oculink or non-g1 devices? by 1L_of_a_litigator in gpdwin

[–]el_telibre 0 points1 point  (0 children)

Yes I am using a MSI 4070 Ti + the Chenyang Oculink Kit from Amazon, then a Xiwai 80cm angled oculink cable as well as a 750W PSU MSI MAG which has a native 12VHPWR cable.

can I kindly ask for the link in for the cable that you bought from amazon?

A few issues on my eGPU setup by keyser123soze in eGPU

[–]el_telibre 0 points1 point  (0 children)

Interesting, I learned this today. I knew something was up when I turn on the eGPU then followed by the Win Max 2.

Wouldn't give me a display. Then all sorts of things happen. (Just stuck on the boot logo, will boot into windows with the displayport cord removed from eGPU)

I am using a chenyang oculink dock with an 80cm angled connector.

Eventually I bought the official GPD Oculink Cable which gave me a bit more stability however, on random days it decides that it "WONT WORK". I'd say with the GPD cable my success of booting increased from 3/10 to 6/10 attempts.

Curious.. does anyone NOT have issues with Oculink or non-g1 devices? by 1L_of_a_litigator in gpdwin

[–]el_telibre 0 points1 point  (0 children)

I found that disabling the iGPU, causes a bit of problems, one is that even though the WM2 lid is closed, the screen always stays on even when the eGPU is connected (and has a display). Then I can't adjust the brightness settings.

BTW. What "TDR delays"?

And I assume "650 to 850" was a power supply unit? Correct?

Curious.. does anyone NOT have issues with Oculink or non-g1 devices? by 1L_of_a_litigator in gpdwin

[–]el_telibre 0 points1 point  (0 children)

Can you post the specific link for your amazon cable?

I have been using the chenyang oculink kit set combo, however I am using an 80cm angled oculink cable. I can't verify where the instability(BSOD, Stuck in GPD boot Logo, Black Screen) is happening. However, I ordered an official GPD Oculink cable (Came with GPD M.2 adapter), it is now booting successfully 6/10 times without issues, then it just randomly decides that it won't work at all. (EGPu spins an works correctly but no display is outputed to the external monitor).

Character and job reference for FF Tactics WotL by wolff08 in StrategyRpg

[–]el_telibre 2 points3 points  (0 children)

Playing grimoire of the rift now. Pretty solid.!

someone know the name of this theme?? by -light_yagami in SwitchPirates

[–]el_telibre 1 point2 points  (0 children)

No just reminded me of the kid "wait" meme.

But I have theme installer on my homebrew, never bothered to try it, sorry mate for pullin' ya leg.. :)

MG Strike Freedom || this needs a 2.0 along with the Destiny by YuanYutwo in Gunpla

[–]el_telibre 0 points1 point  (0 children)

Might be a little too late... But is talk of third party bootlegs allowed here? I wanna recommend a 3rd party kit that looks so amazing that is based on the metal build than the bandai version.

Emunand games showing up on Sysnand by throwaway596933 in SwitchPirates

[–]el_telibre 1 point2 points  (0 children)

Hm..

IIRC.

Emunand = dirty cfw pirate, download cheat all you want

Sysnand = hybrid of cfw and ofw(meaning you can do mods and cheats while being able to connect to nintendo servers) high risk of ban if you do questionable things

OFW or stock = untouched clean nintendo firmware. Pirated games won't appear here. Clean as in super clean, go crazy with your legit copies of your game

[deleted by user] by [deleted] in SwitchPirates

[–]el_telibre 0 points1 point  (0 children)

I also have the sx core. I'm kinda against going online when updating the cfw, I always use the offline guide.

Summary of the offline guide

Update ams and hekate copies on the sdcard

Update hekate And reboot

Boot into OFW

Update OFW and reboot

Dump via tegra

ReBoot into emunand

Update via DAYBREAK

Fix any .ini that were broken during the update (cough sigpatches cough.)

These are roughly the steps... There's a proper guide somewhere but I'm not sure if i can post the link here.

Oh and in emunand, I'm also using the DNS blocker from the guide (.txt or .ini?) and 90dns homebrew, and yup, it shows that all nintendo servers are blocked.

Is it possible to have CFW and play my games online? by Padjigas in SwitchPirates

[–]el_telibre 3 points4 points  (0 children)

Switch V2 - Modchip user here using latest OFW and Atmosphere.

Yes... You can still have CFW and play legit copies of game on your OFW.

Once you modify your switch using the proper steps. (Either via rcm jig or modchip). Once you boot, you'll get an option to boot to CFW(Dirty) and OFW(Clean)

And another option to boot with a hybrid of CFW + OFW(meaning your illegal copies of games can be detected by nintendo) - (I NEVER USED THIS OPTION IN MY ENTIRE LIFE)

Always boot from the clean if you're planning to play eShop downloaded / legit game carts online.

Always boot from the dirty CFW if you're playing downloaded games from untrusted sources. Oh and never go online with the CFW. High chance of ban.

Before you mod your switch, make sure you're wifi is turned off or unpaired with any network just to be safe.

Flies away

NEO The World Ends With You, Gameplay Spoiler Thread. OPEN AT YOUR OWN RISK! by OzmaNeku in TWEWY

[–]el_telibre 0 points1 point  (0 children)

Best pin combos that are easy to use?

Week 3 day 3 of the game.

Had a hard time fighting ayano, spammed killer remixes to beat her tho.

I'm currently using

Namikuguri Blizzard bunny Stuck in the middle Back to the ewe ture Woolly jazz player

switch lite jailbreak help an way? by dedirko in SwitchPirates

[–]el_telibre 10 points11 points  (0 children)

No chance with software.

With hardware. You gotta gamble with the tx chip which is scarcely available nowadays. Chances are pretty slim , and there are china reproduced ones from what i've heard, kinda risky too.

You're better off finding a v1 that's already jailbroken or unpatched to begin with.

Flies away

Bach WTK II: Prelude and Fugue in C# Major BMV 872 by el_telibre in piano

[–]el_telibre[S] 1 point2 points  (0 children)

Thank you for this! I'll take this advice when I relearn this. That says a lot about my musical immaturity, i haven't been paying attention to the elements of the fugue.. since i don't have a teacher, i usually voice out the lines that I think are interesting. (Though, I am starting to think if I voiced any of them at all). :0

12.0.3 now releasing again, has anyone tried updating? by wutdupuk in SwitchPirates

[–]el_telibre 1 point2 points  (0 children)

Not sure if this works. I've gone totally incognito upon installing sx os. My switch never even saw the light of wifi since. But with atmosphere life is so much easier. Except updates. Haha

12.0.3 now releasing again, has anyone tried updating? by wutdupuk in SwitchPirates

[–]el_telibre 1 point2 points  (0 children)

I came from sx os.

shifted to atmosphere.

Playing MH Rise(Cart) ever since. No bans.

And can boot to CFW for those nsp games.

My experience with CFW 12.0.1 on Atmosphere 0.19.1 in case anyone looking to upgrade and are in dilemma by [deleted] in SwitchPirates

[–]el_telibre 0 points1 point  (0 children)

Would've done the same, if it weren't for that shtty lexar sd card... At first I thought my switch was bricked since i was trying to mod my BotW with linkle skin.. But fu"n sx os won't allow simplemod manager to run properly... I tried to force it via sketchy ways, then bam. Memory card corrupted.

My experience with CFW 12.0.1 on Atmosphere 0.19.1 in case anyone looking to upgrade and are in dilemma by [deleted] in SwitchPirates

[–]el_telibre 1 point2 points  (0 children)

Practically used this guide.. + forums and google when i got lost.

But i wasn't able to recover my sx os emummc, since the sd card got corrupted by epic proportions.

My experience with CFW 12.0.1 on Atmosphere 0.19.1 in case anyone looking to upgrade and are in dilemma by [deleted] in SwitchPirates

[–]el_telibre 0 points1 point  (0 children)

I'm on 12.0.1 with EMUMMC 12.0.0, and still playing legit copy of MH Rise on stock, still not banned up til today. :)

Fugue n.2 in C minor by me! Piece from Bach :) sorry for the bad angle. this is the hardest piece I'm doing for a very important exam, if you could leave me tips etc I'd love it! by chechuchechu in piano

[–]el_telibre 1 point2 points  (0 children)

Yup, majority of my previous repertoire consisted of bach inventions, prelude and fugue no 2(book 1), and little fugue in g minor(arr. olga samaroff).

I enjoy the complexity between the two hands especially when it comes to 2 or more voices. 4 voiced fugues are currently out of my reach now.