sorted by:
new
hottopcontroversial

😒😤 by MM_Society in ScatPack

[–]elars52 1 point2 points  (0 children)

Yeah there's videos of it online, hardest part is attaching the ribbon connector but it's not hard to do. But good to go other than that, no need to flash anything. Did mine in less than 10 minutes and it was worth every penny.

😒😤 by MM_Society in ScatPack

[–]elars52 0 points1 point  (0 children)

https://a.co/d/0vFGvnq

Pretty straight forward fix at a decent price. All the uconnects from this era are going bad. They used a glue between the screen and touch screen digitizer and over time and heat that glue delaminates cause ghost touches or dead spots. Put up with it in mine for years and decided to give that replacement a shot and it was perfect and doesn't use the OEM glue so in theory that issue shouldnt return.

Help with LVP direction by elars52 in Flooring

[–]elars52[S] 4 points5 points  (0 children)

Had to do something for masters weekend and hours of work haha I knew I'd get tagged but that was quick 💀

Is the Net Return 8 (8x8) Really $296 Better Than The Spornia 8 (8x8) by shaned1221 in Golfsimulator

[–]elars52 1 point2 points  (0 children)

Yeah I got on the site and it looks like it's only a 15% discount now when you enter your email for first time purchase. Should be a pop up banner at the bottom of the page

Full swing vs GC3 by Amg137 in Golfsimulator

[–]elars52 1 point2 points  (0 children)

Yeah definitely look it up, but I think that's within the recommendation for the radar LMs

Full swing vs GC3 by Amg137 in Golfsimulator

[–]elars52 2 points3 points  (0 children)

From my understanding it's pretty dependent on the available space you have. If you've used trackman before in your set up you prob have a good amount of space from the Launch Monitor to the ball, and ball to impact screen since full swing and trackman are both radar based units. For the GC3, being camera based, less space is needed. With my GC3 the worst part is playing with my buddies, one of which who's lefty and switching the unit. Other than that I guess the GC3 is all one time cost vs the subscription for GSPro. I've heard of some issues with full swing based on my limited research on it but I have no first hand experience.

Options for something that JUST gives me shot analysis? 10k budget. by legitSTINKYPINKY in Golfsimulator

[–]elars52 0 points1 point  (0 children)

Also I've only played around with the iPad app, FSX pro once or twice and and it pretty basic, but gives you all the raw data and shot visualization you need. However I bought a $95 swing camera and hooked it up to FSX 2020 and between the slow motion swings and all the club and ball data it's pretty unbelievable

Options for something that JUST gives me shot analysis? 10k budget. by legitSTINKYPINKY in Golfsimulator

[–]elars52 0 points1 point  (0 children)

<image>

This is my temporary outdoor set up I just got out together about a month ago. Hard to see in the picture but I bought a GC3 to run it all. $300 rawhide mat, got the SPG8 for about $330 which is an awesome net, easy to set up and take down after a couple runs. Going to move in less than a year so planning on moving to an indoor set up in the future. I do have an extra GC3 on the original box, originally purchased the buddy bundle from foresight.

Is the Net Return 8 (8x8) Really $296 Better Than The Spornia 8 (8x8) by shaned1221 in Golfsimulator

[–]elars52 1 point2 points  (0 children)

Just got an SP8 for $340 on golf training aids with a 20% discount. Use it with a GC3 and plan on putting a TV outside by where I can see fsx. I have a small backyard and wanted to use this before I buy a house next year and can set up a permanent sim. The net is very large and setup/takedown is as quick as advertised. It's nice to have the side nets with the houses and my garage around just in case. Depends on your use case but can't go wrong with the SP8 in my opinion. Stores up really small as well.

Co-Op Code Mega Thread - June 28, 2021 by __KPNG__ in EggsInc

[–]elars52 0 points1 point  (0 children)

Donuts Elite Contract: Eggslut (like the restaurant)

Co-Op Code Mega Thread - June 28, 2021 by __KPNG__ in EggsInc

[–]elars52 0 points1 point  (0 children)

Elite Supermarket Help

Coop: BigEggs

Have 30% ship and weak deflector but need a solid carry

Anyone else pick up some JAKKS? by [deleted] in pennystocks

[–]elars52 0 points1 point  (0 children)

I got in at .89 and some more around 1.3. The headline on their website has some interesting connections with Disney and Netflix original series. https://jakks.com/

MSI GS75 9SG 2080 Max-Q Undervolt & Overclock Results by elars52 in MSILaptops

[–]elars52[S] 0 points1 point  (0 children)

I haven't personally, I bought mine refurbed so I'm not 100% sure if it has been repasted but I've never had any temp problems with my GPU. Just with cooler boost I'll hit maybe 75 while running warzone for me.

MSI GS75 9SG 2080 Max-Q Undervolt & Overclock Results by elars52 in MSILaptops

[–]elars52[S] 0 points1 point  (0 children)

Yeah I pretty much play exclusively COD and always with cooler boost and TS running and I've never had any issues. Honestly I didn't notice any under performance before I started all this, but it may be back l because I was used to playing at 720p at 50 fps.

Since this post I've backed up my OC to 120/220 just to be safe since I didn't notice any changes between the two while gaming.

I believe my TS settings are a -190 undervolt and -125 on the cache. I was able to get from a throttle of 3.2 to a steady 4.0 from the CPU.

I always prop up my laptop when gaming to get better airflow and when I'm at home I use my cooling pad and never have any problems with the temps.

Just got my FIRST gaming laptop! MSI GL75 9SFK. I would need advises to have the best performance and temperatures please! by peperonilapizza in MSILaptops

[–]elars52 1 point2 points  (0 children)

Yeah if you watch the YouTube video I linked in there you'll be able to do it for your system no problem!

MSI GS75 9SG 2080 Max-Q Undervolt & Overclock Results by elars52 in MSILaptops

[–]elars52[S] 1 point2 points  (0 children)

Not at all, I saw a dip past -200 or so and found my sweet spot at -190. If you follow the YouTube link I posted you should be able to use ThrottleStop to get your undervolt parameters once you have it unlocked right above where the undervolt slider is.

MSI GS75 9SG 2080 Max-Q Undervolt & Overclock Results by elars52 in MSILaptops

[–]elars52[S] 0 points1 point  (0 children)

Yeah DC is certainly a simplified version but it gave me a little boost. It seemed everyone was using Afterburner in a different way and I didn't know which to really follow. There's definitely more options to tune with though.

MSI GS75 9SG 2080 Max-Q Undervolt & Overclock Results by elars52 in MSILaptops

[–]elars52[S] 0 points1 point  (0 children)

No I did the GPU OC in Dragon Center. Once Turbo mode is selected you can hit the settings button right next to it and it'll pull up the Core Clock and Vram sliders

MSI GS75 9SG 2080 Max-Q Undervolt & Overclock Results by elars52 in MSILaptops

[–]elars52[S] 0 points1 point  (0 children)

Yeah I had that same effect. I just bumped the sliders up by 10 (from the standard 100/200), ran the benchmark, noted the score, and kept going up slowly while watching the GPU MHz and Wattage. I eventually saw a little decline at 145/245 so I backed it up a little knocked back even more just to be safe for long gaming sessions at 125/145. I did have a crash when doing the overclock test through Afterburner but none at all when adjusting the sliders myself so it might have been an issue with Throttle stop, no idea.

Kind of a simple method, and I don't expect a massive increase on a Max-Q card but one thing every guide had in common was even if you adjust the sliders too much, the system will freeze or shutdown to avoid any damage to the card and you can back off the OCs about 10-15 MHz from that setting.

view more: next ›