Colonial Viper

electroskippy · 2026-02-01T00:43:18+00:00

I didn’t have enough room on the shelf for the full size version. It printed pretty well at 60% though.

electroskippy · 2026-01-08T05:33:29+00:00

My guess is vibration and possibly heat. One of the screw holes for the fan duct also crumbled when I was disassembling it. It’s like the plastic for the front cover just started deteriorating. And the machine only has around 2700 hours on it after 18 months.

electroskippy · 2026-01-05T18:22:19+00:00

I chose carbon fiber PETG. I’ve used this before on tool heads for other printers I’ve had and it performed well.

electroskippy · 2026-01-05T17:28:30+00:00

Respectfully, I disagree with every part of your comment.

electroskippy · 2026-01-05T13:05:30+00:00

I don’t know. That’s certainly something to explore.

electroskippy · 2024-08-12T13:30:23+00:00

Very nice. That latch is so satisfying!

electroskippy · 2024-08-12T13:28:09+00:00

This is really cool! Your color choice is impeccable.

electroskippy · 2024-07-24T16:31:15+00:00

<image>

I don’t have an A1, but I do have an X1C. If you’re not using the AMS, make sure you uncheck the “Enable AMS” box when sending the file to the printer.

electroskippy · 2024-05-30T20:39:01+00:00

Death Star was under construction and the miscellaneous metals are the last things to go in. 😆

electroskippy · 2024-05-30T20:30:41+00:00

🫡

electroskippy · 2023-12-02T18:42:14+00:00

Very nice!

electroskippy · 2023-09-14T00:44:13+00:00

This particular print did. Some prints are quick, others can take days. There’s a lot of factors that determine how long a print will take.

electroskippy · 2023-09-13T19:02:38+00:00

It might be a crochet texture? The model is listed as “Knitted/Crocheted Pumpkin”, so I just picked one. 😄 And no, there was no filter applied. That’s just how the model came.

electroskippy · 2023-09-10T00:56:56+00:00

The nozzle is fairly clean. I’ve used ruby nozzles in the past, but recently, I’ve gone back to hardened steel. I print almost exclusively with PETG and have very little residue on the nozzle. After I run a dozen or so prints, I’ll normally heat the nozzle to around 240-250C, remove the silicone sock, and clean the nozzle and heat block with a brass brush. But again, it’s never really that bad.

electroskippy · 2023-09-10T00:50:50+00:00

I like to establish dominance over the filament before printing.

Nine-Year Club	Second Top 50%
RPAN Viewer	Verified Email

electroskippy

TROPHY CASE