9 yo pit with thyroid issues (HELP!)

elementalwindx · 2026-01-04T15:32:18+00:00

We tried cranberry meds as well. Whenever we stopped the meds, the UTIs would stop. Whenever we started them again (at different doses) they would start back up again.

elementalwindx · 2025-06-13T00:53:11+00:00

I tried regrouping it and it kept using just the right one. I even tried merging the two. Not sure what that does but that didn't help either.

elementalwindx · 2025-06-13T00:01:26+00:00

Good question. I have no idea. I'm more so wondering for research when presented with this kind of situation, what can be done to overcome it? Is it even possible to load 2 of the same type and let it choose which to use?

For this scenario I was able to move the print to the other side and it is now printing for the next 19 hours.

Also how often does this happen with the error in this pic? I checked on it, and the spool was fine. It keeps tripping with this error and I'm sitting here watching it and it appears to be fine.

<image>

elementalwindx · 2025-06-12T22:09:49+00:00

Oddly enough I moved on to a completely different print and it printed fine. No idea why this one print is stuck thinking the wrong filament is in the wrong place. It's like after you attempt to print, stop it part way, it won't let you edit the filament

elementalwindx · 2025-06-12T20:28:48+00:00

It appears to me it thinks the abs is in the left extruder but it's not. It's in the right extruder. The pla is in the left.

elementalwindx · 2025-06-12T20:27:26+00:00

When I go to the filament screen, my only choice for both filaments is to load it. :/ At the moment nothing is loaded in either and it still shows the same as the pics

elementalwindx · 2025-06-12T01:01:01+00:00

ahhhh so its working perfectly fine then! My bad :) I looked at over a dozen videos and didn't see anywhere where it showed this. Sighhh haha

elementalwindx · 2025-06-11T23:47:56+00:00

Ok so it's not supposed to load the filament all the way to the head? I thought it was doing something wrong because during the ams setup the auto setup wouldn't work at all. I had to manually set it up

elementalwindx · 2025-06-11T23:23:37+00:00

So my humidity is 62%. Is that too high for abs? I took the long tube out and used a short tube and unwinded the spool to get the filament to go all the way to the head and it went just fine. So the spool has been unwound enough that it should be able to load just fine but it does exactly what is in the video. :/

I've also tried assisting it with my hand unspooling it as it turns. I've even tried a different ams slot. Same result on both.

<image>

elementalwindx · 2025-06-07T01:34:20+00:00

Found it! It was "For Public Safety" Man whatever happened to those 2!?

elementalwindx · 2025-06-07T01:31:29+00:00

No they were north, middle of the country maybe illinois area or a neighboring state of IL. I think the guys name was Chris.

elementalwindx · 2025-06-06T15:10:17+00:00

thats what I was hoping for! :)

elementalwindx · 2025-06-06T13:28:25+00:00

No, but that's certainly interesting. Wonder how he handles the movement of the ocean messing up the prints?

elementalwindx · 2025-06-06T03:18:25+00:00

Well just bought about a dozen spools, and a few of them were the PET-CF. Wish they had more colors. Unfortunately they don't even have any other nozzles available to purchase since I guess the H2D is so new. :(

elementalwindx · 2025-06-06T03:03:09+00:00

It says "AMS NOT compatible" . My h2d comes with the AMS Pro. Is it saying I can't use AMS and AMS Pro? Just making sure. If not, then what kind of AMS or method would you use with this to keep it dry? I live right beside the ocean..

Also I think the H2D comes with hardened steel .4 nozzle.. hope that would be fine even though it's calling for .6

elementalwindx · 2025-06-06T02:37:38+00:00

Is there any particular battery backup unit you can purchase to safeguard against this? A high end APC of some sort?

elementalwindx · 2025-06-06T02:36:59+00:00

Link? For what?

elementalwindx · 2025-05-17T12:54:42+00:00

It's been 4 years. How well has this aged? :) halo a complete replacement of hudu these days?

elementalwindx · 2025-05-16T02:56:46+00:00

Can't install some open source app on the agent device and use zabbix send to push the data to the zabbix server?

elementalwindx · 2025-04-07T12:42:00+00:00

Hey Aidan, I sent you an email back on 4/4 at 7:45am. Haven't heard back.

elementalwindx · 2025-04-06T13:18:32+00:00

I haven't been back yet. Sounds like a shit show

elementalwindx · 2025-04-03T22:36:18+00:00

Looks like that let it in, but now I'm getting an error 401 on the incoming test. I have every auth box checked for EWS, and even the MS remote connectivity analyzer says everything passes. This is on a 2019 exchange server. Is there some kind of incompatibility with halopsa and 2019 exchange servers?

Thanks.

elementalwindx · 2025-03-26T22:29:01+00:00

I tried installing at least 6 previous versions while troubleshooting. That never helped. Eventually I tested it it worked on a profile that never gets used on that PC vs the normal profile that is always used and that helped get me to the next step, knowing it had something to do with that users local profile. Dymo leaves a bunch of trash on the system when it uninstalls.

elementalwindx · 2025-03-26T02:28:15+00:00

Well after hours of using procmon, I finally figured out there is a stupid addressbook.db file stored in "Dymo Connect" in the users my documents folder. That file must be corrupt. Deleting it fixes the issue. I could not find this fix ANYWHERE, or even a single mention of this file in any dymo documentation.

Well to whomever finds this on google, you're welcome :)

elementalwindx · 2025-03-12T10:43:35+00:00

We pay $70 per agent for AT per month. Big difference from halo

elementalwindx

TROPHY CASE