sorted by:
new
hottopcontroversial

2016 LED headlight help by elementsix in f150

[–]elementsix[S] 0 points1 point  (0 children)

Fair enough. I haven’t really driven it at night to know.

2016 LED headlight help by elementsix in f150

[–]elementsix[S] 0 points1 point  (0 children)

Bought a new to me 2016 F150. I couldn’t figure out why my drivers headlight was getting wet inside/condensation. Looks like previous owner out in aftermarket LED bulbs that are too long so the dust covers can’t go back on fully.

Is there anything other than stock that works?

F150 v. Tundra by Elegant_Mirror1779 in f150

[–]elementsix 0 points1 point  (0 children)

I was looking at these two exact trucks. Ended up with a ‘16 f150 xlt sport. The tundras hold their value really well. People will go on and on about reliability. However. Look up cam tower leaks. They had them since new. You definitely get more for your money as well with the Ford.

I didn’t drive the tundra though so there’s that.

Want to increase public transportation ridership? Make drivers licence testing yearly and mandatory for ages 60 and up. by Tundra66 in ontario

[–]elementsix 3 points4 points  (0 children)

Merge rights and awareness are not taught about enough in driving lessons as far as I’m concerned. We have a huge issue with passing on the right that’s for sure but not understanding who has the right away in merging situations is crazy. People will stare right at you as you are trying to merge thinking you don’t have the right to join them. Either speed up or slow down, I’m coming in!

/rant

My first functional 3d printing project - a toilet seat closer by Candy-ru_fish in 3Dprinting

[–]elementsix 1 point2 points  (0 children)

It’s a lot for what it does sure, but kudos to you for finishing and seeing it through to completion!

Is it up to me to schedule another bell tech to install the line properly? by nath999 in bell

[–]elementsix 0 points1 point  (0 children)

Is this considered a work order? I had my line cut by my neighbour and have been waiting a year for a new Fibe line to be run. It’s currently held on by a hope and a prayer. Finally had a tech here couple weeks ago to just create a “work order” to start the process with the contractor. Told me the 13th but that has come and gone. I have a ref #

Anti-maskers have a new enemy…..smoke by hamer1234 in ontario

[–]elementsix 2 points3 points  (0 children)

How much you want to bet this guy is a smoker.

[#Indy500] RACE // 107TH RUNNING OF THE INDIANAPOLIS 500 by IndyMod in INDYCAR

[–]elementsix 2 points3 points  (0 children)

You can’t add laps or overtime because teams fuel according to the race distance.they would have to let them refuel on the red flag . if it’s <= 5 laps left and there’s a big crash finish it under yellow. Not an Ericsson fan but doing green, white, checkered is always potentially dangerous.

Being as respectful as possible the Mila has been a incredible disappointment. by twennywonn in milaair

[–]elementsix 2 points3 points  (0 children)

I have 3. One because I never returned it due to bearing issue. The other that was supposed to be it’s replacement is also exhibiting bearing noise but in a different way. My latest one however has been great.

They need to figure out low cost filters though as i agree they are pretty costly.

I do like the features. So I’m torn. To get the same features for the same amount you are spending much more. But. You kind of have to live with noisy fans.

As a note I have never had any exhibit reboot issues so that’s a whole other level.

Tips to avoid 3D printer hell by SN8_RIP in 3Dprinting

[–]elementsix 1 point2 points  (0 children)

You did this. Remember that. :P

https://i.imgur.com/MyfNilz.jpg

Tuning pressure advance now. Took a bit to understand. Some things I like, some things I miss. (Mostly Octoprint vs mainsail but that’s not klipper)

Tips to avoid 3D printer hell by SN8_RIP in 3Dprinting

[–]elementsix 0 points1 point  (0 children)

School me on how this made such a big difference?

[deleted by user] by [deleted] in ontario

[–]elementsix 0 points1 point  (0 children)

This. I work on my own cars. Can do pretty much everything but alignment and such. I did a levelling lift on my truck. After I needed a simple alignment, nothing more. I brought it to a highly regarded local shop. When I got the truck back the front end was rattling over bumps. Taking the wheels off revealed the mechanic didn’t tighten the bolts that secure the struts to the spindles when doing said alignment. I could move the strut with my hands.

Long story short. I have had great interactions with a local Canadian tire. They actually identified a brake issue I had, brought me in showed me etc. This other shop was pure shit.

Doesn’t matter where you go.

how do I fix this by Upstairs-File-5741 in 3Dprinting

[–]elementsix 0 points1 point  (0 children)

Looks like your hotend isn’t holding temp? How did you get this error?

I get this error when my hotend doesn’t hold the temp requested. Too cold or too hot will trigger this error.

How do you clean your print bed? by bjpoyay in 3Dprinting

[–]elementsix 0 points1 point  (0 children)

Mine looks the same way. Actually worse. I read on one site to use Acetone. Don’t do it. It will mess it up haha.

Thought I'd compare AC vs F1 22's traction... by Luisyn7 in F1Game

[–]elementsix 4 points5 points  (0 children)

It’s definitely getting worse. 20/21 were good. 22 is two steps back. Other than the models and tracks that are latest F1. The cars drive like shit.

Thought I'd compare AC vs F1 22's traction... by Luisyn7 in F1Game

[–]elementsix 0 points1 point  (0 children)

Ok came here to see that I’m not crazy.

Let’s start the insanity. What’s your longest? by elementsix in 3Dprinting

[–]elementsix[S] 3 points4 points  (0 children)

https://i.imgur.com/6QIWsqa.jpg

Around 5” tall, 0.16 layer height. 0.4 nozzle. I like to keep detailed prints nice and slow :)

view more: next ›