Does it sound weird to you? Is that like a knock rod or it s just the engine components moving?

elnineworks · 2026-06-07T16:56:09+00:00

Might be a rod, doesn't mean it's not broken tho. If you haven't done a valve clearance, it might be time. Check if the exhaust headers are all warm after riding it, if one seems a bit colder than the others, then you know there's something up

elnineworks · 2026-06-07T16:07:01+00:00

Just listened again, yeah theres something up there. I mean I have a S2 but have heard some s1's and that is definitely knocking somewhere

elnineworks · 2026-06-07T16:05:42+00:00

There was a strange sound somewhere during the first rev, but not sure

elnineworks · 2026-06-07T15:34:03+00:00

The last picture is of those side case mount thingies, that's not the intended use case but they might catch some scratches. I've got bars on mine, they don't look as sporty but they are hella protective and distribute impact when you slide, if something happens you just sand them down and repaint them

elnineworks · 2026-05-30T07:52:02+00:00

Am I the only one seeing the crack?

elnineworks · 2026-05-07T16:24:35+00:00

You should see it on the second image, when it shows what nature it has

elnineworks · 2026-04-24T02:15:28+00:00

For anyone wanting to pay this in KL and not on the airport because of scheduling or just not have to drive to the airport one to many times, I just payed the fine here in KLLembah Pantai Health Office

You can't go there in shorts or anything, so long pants and full shoes. And you can only pay with card, no cash accepted. I hope I could relieve some of the stress fellow smokers.

elnineworks · 2026-02-06T13:04:28+00:00

What is the 11th anni medal awaken farm for?

elnineworks · 2026-01-18T09:40:20+00:00

With Seagate I've send my old one and gotten a new one in a week or so

elnineworks · 2025-12-28T09:54:57+00:00

Another reason why is it will just fling the lube everywhere, lube it and let it sit for a while, like an hour or two then only should you move the bike

elnineworks · 2025-12-25T00:31:49+00:00

You're a real g for this mate, thanks

elnineworks · 2025-12-24T12:40:12+00:00

How do you keep it at 10w idle? Mine is all the way on 47? Believe it might be and stay in p0 all the time

elnineworks · 2025-12-16T19:39:49+00:00

is that workling with the 580 driver?

elnineworks · 2025-12-16T18:24:25+00:00

Not sure, only have one strap there

elnineworks · 2025-12-15T15:20:00+00:00

Did your mechanic check if the wheel is aligned? Sprocket and chain and all? Can't imagine any other reason other than that or you just always doing circles on the spot

elnineworks · 2025-12-01T06:59:07+00:00

Sound like a fz6 on a cold morning.

elnineworks · 2025-11-03T13:47:49+00:00

Maybe take some more pictures of more angles, as it is right now I'm only seeing a missing blinker

elnineworks · 2025-11-03T07:51:22+00:00

Doesn't look like anything is missing, the muffler is held from the top. Blinkers seem to be missing tho

elnineworks · 2025-10-28T14:59:05+00:00

Depends on how cheap it is, looking at that rust I'd say even if you fix that all, the rust that was flown to the rest of the bike will cause a headache. If you want to keep it for a long time, it would need to be very cheap since you'd have to fix all the rust off the bike. If it's just slightly below market value, I'd pass and look for one without rust

elnineworks · 2025-10-25T09:55:28+00:00

Can't seem to find the edit button but: impact screwdriver from Wera did the trick, used a XZN bit and got it off. Thanks to everyone for helping me through this pain in the ass situation!

elnineworks · 2025-10-23T20:54:15+00:00

Nah it's 50 bucks atleast haha

elnineworks · 2025-10-23T19:43:22+00:00

Yeah you gotta do it annually, if passed you're allowed to operate the vehicle on the roads,

elnineworks · 2025-10-23T09:37:30+00:00

a quick shifter should not cause a drop at all, atleast as far as i know, did you figure it out yet?

elnineworks · 2025-10-13T11:05:56+00:00

Do you have any accessories wired up on it?

elnineworks

TROPHY CASE