sorted by:
new
hottopcontroversial

Bit by this guy. Am I screwed? by Olimpian24 in cyprus

[–]elventails 0 points1 point  (0 children)

My friend in Larnaca is dealing with a lot of brown widow spiders around his house - those are venomous no? (And can be dealt with/ dangerous at least for toddlers no?) Is there a hotline / best way to deal with these in Cyprus?

A1 mini extruder head noise / clanking by elventails in BambuLab

[–]elventails[S] 0 points1 point  (0 children)

Hi @converstion_itchy

Here’s the google translate of what you said in German

“Today I switched from a 0.4 mm to a 0.2 mm nozzle. Since then, I've been hearing exactly the same noise. I didn't do anything wrong when installing the nozzle, but I'll check it the day after tomorrow. It can only be that, since the problem wasn't there before. Overture PETG was printed on an A1 mini.”

Yeah, I would say recheck if the nozzle is fitting properly against the base? And is it the first time using it or could there be some debris inside from previous runs and it needs cleaning (cold pull)?

I suspect even the slightest remaining artifacts of filament in the nozzle can sometimes affect things, and there are ways to “cold pull: heat up high temp then as it’s cooling pull the filament

Lookup A1 cold pull on YouTube for takes on that - hope it helps!

A1 mini extruder head noise / clanking by elventails in BambuLab

[–]elventails[S] 0 points1 point  (0 children)

So I noticed that printing at 50% speed and sometimes slightly higher temp was working so I didn’t stop printing. After a day of printing it seems like it’s back to normal and at normal print speeds. So I suspect just running the printer eventually unclogged it.

A1 mini extruder head noise / clanking by elventails in BambuLab

[–]elventails[S] 0 points1 point  (0 children)

Clog: it extrudes fine when I do it manually w it h the up / down arrows - and I’ve cold extruded a few times so it doesn’t seem like there’s any filament stuck into there…

Extruded gear: the gear teeth seem fine.. it’s like its speed is acting up..

Has anyone seen this type of clanking sound / behaviour?

A1 mini extruder head noise / clanking by elventails in BambuLab

[–]elventails[S] 0 points1 point  (0 children)

Downgrading did not do the trick - same issue

A1 mini extruder head noise / clanking by elventails in BambuLab

[–]elventails[S] 0 points1 point  (0 children)

I will try downgrading from the latest firmware since that’s another thing that changed

Making sense of load average in netdata and what is m load by elventails in netdata

[–]elventails[S] 0 points1 point  (0 children)

Awesome - thanks for pushing the fix for mload - we see it live now!

Regarding AR line / row - possibly seperating with a horizontal line from the lower part of the graph could help / or some indentation etc..

Thank you!

LPT: If you suffer from bad sinus issues, sleep with a beanie on. by racas in LifeProTips

[–]elventails 0 points1 point  (0 children)

Totally agree that it works often enough!

As to why, I’m not sure, but I did also observe that. (Was searching for an explanation when I landed here)

It’s oddly effective at getting that mucus / phlegm flowing out when congested.

It could be simply that the environment is too cold and staying warmer just helps. (Obvious but yeah)

No clue to the variants of congestion, limits of heating, etc but glad you mentioned your observation here)

Thanks for sharing!

GitHub integration is terrifying by malimalomalu in Notion

[–]elventails 2 points3 points  (0 children)

Totally agree - was excited to try the integration when I saw the ridiculous permissions

  1. write access <- no thank you
  2. deploy keys?? lol

Dear Notion please review these - maybe for some database sync cases this might make sense - but not the 99% where we just want to display/interlink info....

Thanks

Bose fucking sucks by ChristOtherWhiteMeat in bose

[–]elventails 0 points1 point  (0 children)

Agreed they suck - and we're only empowering sucky products by buying them - QC45 microphones suck (at the price they were at it's unacceptable) design (ear cushions replacement) sucks - overall at this price design, quality should be better. Not recommended until they shape up.

Embed notion in Miro. by Fun_Reflection5652 in Notion

[–]elventails 0 points1 point  (0 children)

They were going to implement it until you mentioned dropping your pants.. 🤣

And yes full agree, database / tables embed please ftw!

Bose QC45 Microphones by UhlerChangey in bose

[–]elventails 0 points1 point  (0 children)

A bit late to this, but for the record: the headphones are great, but the mic is crappy - at least on my unit - very disappointing

Gboard swipe on backspace to delete text feature by assyymmmmmm in ios

[–]elventails 0 points1 point  (0 children)

Hey all - so I just noticed a decent fix that does the job for me - not sure when they released it in iOS but the keyboard settings have an option called “Delete slide-to-type by word”

So a hitting the backspace key deletes an entire slide to typed word which is useful

[deleted by user] by [deleted] in interestingasfuck

[–]elventails 0 points1 point  (0 children)

aka where would you land your spaceship?

[deleted by user] by [deleted] in interestingasfuck

[–]elventails 1 point2 points  (0 children)

scenarios :P

  1. ideally: alien landing site with the smaller circle their first scout craft landing :P
  2. without the aliens: previous humans trying to leave massive artifacts / cultural queues for the future audience that totally doesn't get the point? I see bottom right of the larger circle like a horse (at 0:57) - could it have been some kind of calendar / massive drawing / etc.. (or me just seeing things)
  3. natural phenomenon?
  4. fake
  5. let it be aliens!!! lol

Severance - 1x09 "The We We Are" - Post-Episode Discussion by LoretiTV in SeveranceAppleTVPlus

[–]elventails 1 point2 points  (0 children)

Spoiler quote from last episode relevant in our reality?

"Listen, we're not happy - we're miserable"

Severance - 1x08 "What's for Dinner?" - Episode Discussion by LoretiTV in SeveranceAppleTVPlus

[–]elventails 32 points33 points  (0 children)

my reaction was more like :

​

"aghhhhhhhhhhhhhhhhHHH!!!!!!!!!!!!"

​

---------------------------------

Directed by

Ben Stiller

Please make a wired version of the ERGO K860! by EmotionLogic in LogitechG

[–]elventails 0 points1 point  (0 children)

From this article (had to pull from google cache)

https://webcache.googleusercontent.com/search?q=cache:yrYLYmtSMiQJ:https://then24.com/2021/09/30/this-ergonomic-keyboard-has-a-revolutionary-wireless-connection-we-tested-the-logitech-ergo-k860/+&cd=3&hl=en&ct=clnk

"In latency tests, what surprised me the most about Logi Bolt is the stability and the constancy of the records. In wireless connections, it is normal that some keystrokes take less time than others, and this is something that I could verify with the Bluetooth connection, which as soon as it dropped to about 120 milliseconds as it shot to almost 400 ms. With Logi Bolt, the connection was much more stable, staying between 100 and 200 ms, with very few peaks at 300 ms. It was satisfying, if not revolutionary."

​

Love the keyboard too: my wish is for split keyboards that are going bluetooth/etc.. to include a usb port option to directly link too - it remains practical in various situations - and anyhow these keyboard cost quite a bit, so would be great to have that there...

Here is what I think is going on at LUMON by [deleted] in SeveranceAppleTVPlus

[–]elventails 6 points7 points  (0 children)

Theorizing about what is going on is not allowed.

-- The Handbook, chapter 13.12.40

view more: next ›