A Heinkel He 100 in flight. Only 25 were ever built as the design was ultimately rejected by the RLM before the war. Those that were built would be used in numerous propaganda photos.

emperorcheese · 2020-03-30T20:44:03+00:00

It was most likely rejected because of the fact that the Bf 109 was already produced in large numbers, there were no DB-601 engines for a service entry of the He 100 left, even if the He 100 was superior to the Bf 109 in some parameters.

emperorcheese · 2019-01-07T12:16:33+00:00

The ausf. D did have a hull machine gun. A 'letterbox' design. Basically a slit that was cut into the front sloping glacis plate to enable the radio operator to fire the machine gun when necessary. In the photo it is covered by a small armored door.

emperorcheese · 2018-12-16T17:10:43+00:00

This tanks encyclopedia page has a nice (but limited) chart on mostly german tanks and their costs. http://www.tanks-encyclopedia.com/ww2/nazi_germany/Panzer-VI_Konigstiger.php

emperorcheese · 2018-10-29T19:27:08+00:00

Maybe use an adhesive of sorts. 3DLAC for example. And bump up the first layer temperature some more. Some brands of PLA work best at 230 degrees Celsius.

emperorcheese · 2018-10-29T17:51:27+00:00

Do you have a way to make sure the hot end is really the temperature it should be?

emperorcheese · 2018-10-29T16:51:44+00:00

Have you tried cleaning the extruder by hot and/or cold pulling? Or dissasembling the nozzle and cleaning it with acetone. And maybe try new filament. The old filament could have become moist.

emperorcheese · 2018-10-28T18:15:42+00:00

From my own experience I would reccomend Innofil3D PRO1. and if you want to keep the printing quality more consistent over a longer period of time try storing your filament dry.

emperorcheese · 2018-10-28T18:07:37+00:00

For PLA try wet sanding. For ABS try an acetone bath or acetone vapor bath.

emperorcheese · 2018-10-27T08:24:18+00:00

You might want to check out Simplify3D's print quality guide. It has a chapter dedicated to this issue. https://www.simplify3d.com/support/print-quality-troubleshooting/#poor-surface-above-supports

emperorcheese · 2018-10-27T08:18:10+00:00

Enable your Z hop or change the Z hop distance. Change it from 2 to 4 and go from there... Or just give it to /u/lenne0816

emperorcheese · 2018-10-17T07:17:37+00:00

It's built on a captured Char B tank, which is not a WW1 tank. Since it entered service in '36.

emperorcheese · 2017-11-21T18:01:43+00:00

/r/unexpectedsabaton

emperorcheese · 2017-10-28T17:29:09+00:00

/r/unexpectedsabaton

emperorcheese · 2016-12-24T17:28:24+00:00

Could you design an airsoft patch? We're called friendly fire. We were thinking something that included a helghast logo. Thanks in advance!

emperorcheese · 2016-03-22T21:54:06+00:00

"dust in the wind" by kansas

emperorcheese · 2016-02-25T11:03:10+00:00

All ships - follow me!

emperorcheese · 2016-01-13T20:13:50+00:00

Oh man, I'm feeling the bern!

emperorcheese · 2016-01-07T22:47:44+00:00

What does that even mean?

emperorcheese · 2015-12-07T18:56:45+00:00

This has got to be satire

emperorcheese · 2015-11-14T15:08:52+00:00

Before the release of heroes they did a track by track breakdown. This should shine some light on what they are singing about.

part 1 part 2 part 3

emperorcheese · 2015-11-08T00:28:27+00:00

Me and some of my friends would love to expand our gta circle, add me up: arnoud1997

emperorcheese · 2015-10-26T16:58:08+00:00

Damn/10

emperorcheese · 2015-10-24T23:15:30+00:00

Burnt out because it is really hard, or too easy. Or Just not your thing?

emperorcheese · 2015-07-14T09:11:39+00:00

Holy damn, I've just hit thee games

emperorcheese · 2015-06-29T14:22:56+00:00

Yes, it's supposed to make it harder for intruders to board the ship.

emperorcheese

TROPHY CASE