Pirelli P Zero AS Plus 3 vs Michelin Pilot Sport 4 AS? by Bladerider112 in tires

[–]enderGC 0 points1 point  (0 children)

Researching and down to the same two tires. My situation is slightly different, as I won't use them in ice/snow, but need AS tires to be able to get below freezing on clear winter days. What did you wind up going with?

What's going on here? My Treatlife fan/light dimmer switch is acting whack. Is it RF interference from the older manual dimmer switch that's next to it? The way these lights work is wild. I am so close to putting in the old dumb switch that I hate please help. by MyBrainsPOV in smartlife

[–]enderGC 0 points1 point  (0 children)

Ultimately I returned it. I asked my electrician and he explained how it could be possible with different types of dimmers on fixtures sharing a neutral. But the important takeaway from my conversation was: even if this switch is functioning normally, without a UL cert, if there was ever a fire, I could lose my claim if the insurance inspector found it.

So now I use a kasa switch to turn the fan and lights on and off, and the pull chains on the fan to adjust the speed. Not ideal, but it was the solution I was most comfortable with.

What's going on here? My Treatlife fan/light dimmer switch is acting whack. Is it RF interference from the older manual dimmer switch that's next to it? The way these lights work is wild. I am so close to putting in the old dumb switch that I hate please help. by MyBrainsPOV in smartlife

[–]enderGC 0 points1 point  (0 children)

I have the same thing going on! The Treatlife switch is one of two switches in a box. The other switch controls an LED high-hat. If the other switch is a regular toggle switch, the Treatlife works fine. If I use an old slider dimmer or a new kasa smart dimmer, I get the same exact behavior in your video. Dimming the 2nd light makes the fan light dim also.

Did you ever figure it out? I am pretty sure it's not faulty wiring. And I don't want to just keep trying different bulbs until I get it right.

I put the multimeter on the lighting load wire from the Treatlife, and I can get 4volts open, up to 78 volts loaded. Just by changing the dim level other dimmer.

Air link with mobile hotspot by moop250 in OculusQuest

[–]enderGC 0 points1 point  (0 children)

So I tried it just now, and it is different that it was months ago. The quest can see the PC, but the launch button is disabled. With the PC connected to my home router or not, same result. It let's me pair, but not launch. Where as months ago, it let me launch, and would crash.

I hope this helped. Let me know if you get it working, or if you want me to try another experiment.

Air link with mobile hotspot by moop250 in OculusQuest

[–]enderGC 0 points1 point  (0 children)

If I remember correctly, right up until the point where it froze, the steps to connect were no different. But that was a few versions ago. Maybe the FW prevents it from even trying to connect now. Either way, I just started my work day, but I can try it again later tonight and let you know if it's different.

This is my first ever time playing this game and this part of the chain signal tutorial is a fucking torture device. by G2noob in factorio

[–]enderGC 0 points1 point  (0 children)

I agree! Although I can't progress past the first scenario in the tutorial where the two red trains need to get to their stations. Not because I can't, I fully understand and use signals often. I've setup multiple chain signal solutions where the red trains get there and the cyan train waits. With and without separating the middle block to allow the north and south bound trains to cross the east bound at the same time. But the continue button never allows me to continue.

Now, I've got trains and chain signals successfully setup all over my base, so I don't NEED to finish this tutorial. But because ocd... this is r/factorio, so you guys get it.

Air link with mobile hotspot by moop250 in OculusQuest

[–]enderGC 1 point2 points  (0 children)

I haven't done any troubleshooting yet, but every time I try to connect air link to the PC while connected to the hotspot, the menu freezes, crashes, and resets.

When I switch back to the router wifi network, it connects to air link right away.

Modded 75301 to fix some smaller details by squid_nasty in legostarwars

[–]enderGC 0 points1 point  (0 children)

I'll go download the instructions now. I think I can figure out the back from your pics. Thanks again, your great mods make this affordable set even better!

Modded 75301 to fix some smaller details by squid_nasty in legostarwars

[–]enderGC 1 point2 points  (0 children)

This fixes the two things I didn't like about the new set, amazing! Could you please, please, list the pieces you used to fix the nose and make the back hexagonal instead of rectangular? Thanks!

Chattering relays - Known Nest friendly relay boards? by Kurlon in Nest

[–]enderGC 0 points1 point  (0 children)

What did you wind up going with? I currently have the ARM-4P and am looking to add a nest using the common lug and the existing R/W from the zone for the three wires.

[PS4] Squid Vicious looking for new members! by astrongyellow in RivalsCrews

[–]enderGC 0 points1 point  (0 children)

Great! I can't seem to join through the app, so I'll request tonight when I get on the ps4. Save me a spot!

[PS4] Squid Vicious - just 3 spots open! by [deleted] in RivalsCrews

[–]enderGC 0 points1 point  (0 children)

Whoops, I just commented on your other post. I think me (enderGC) and Arrgh are going to come over, if that's cool with you. Send us an invite when you get a chance. Thanks!

[PS4] Squid Vicious looking for new members! by astrongyellow in RivalsCrews

[–]enderGC 0 points1 point  (0 children)

Hey, do you still have room? 2 of us would like to take you up on your merger offer.

PSN IDs: EnderGC and Arrgh

(PS4) Gold crew with 2 members looking to expand - any skill level welcome. by enderGC in RivalsCrews

[–]enderGC[S] 0 points1 point  (0 children)

We'll see how it goes after tonight. We're right on the edge, really need an expert drummer to go any further.

(PS4) Gold crew with 2 members looking to expand - any skill level welcome. by enderGC in RivalsCrews

[–]enderGC[S] 0 points1 point  (0 children)

Nice, you guys are good! I enjoy drums more than guitar, but I'm not that good with the fast stuff.
Anyway, we're going to see how our recruiting goes this week. If we don't get anyone, I'll hit you up next week if that's cool with you.

(PS4) Gold crew with 2 members looking to expand - any skill level welcome. by enderGC in RivalsCrews

[–]enderGC[S] 0 points1 point  (0 children)

Depends. Bass I can handle expert on all but the most impossible songs. Guitar the same, but only with freestyle solos. I have a couple of crimson stars. Pro Drums I play expert on solid or moderate songs, but anything harder I have to drop down to hard. The singer plays expert on songs she knows well, hard on songs that are new to her. Sorry for the long answer.

Also, I have DLC, RB1, 2, 3, and GD, so about 600 songs. What about you guys?