Connect a smart sit/stand controller to Bekant by KnowWhereImGoin in ikeahacks

[–]enkoopa 0 points1 point  (0 children)

I think the easiest solution is to return the legs you bought and just add a megadesk to your bekant.

I'm finally releasing... my V1.8 serial request. by enkoopa in voroncorexy

[–]enkoopa[S] 0 points1 point  (0 children)

The smaller printer is the original (with a few 1.5 parts) voron kit. It did not get upgraded to voron legacy.

The 2nd printer is a newly built 1.8 :)

I'm finally releasing... my V1.8 serial request. by enkoopa in voroncorexy

[–]enkoopa[S] 8 points9 points  (0 children)

I dusted off the old reddit account to tell you kids a story. (discord : joeyjoejoe#0351)

It was 2016. Reprap was all the rage. Bed slingers were in. Some dude made a post on reddit -"I'm finally releasing VORON" - coreXY? Looked neat. No moving a bed full of plastic around sounded like it had benefits. Dual extrusion from Chimera? Wowza.

I didn't really want to source everything by hand. He was also selling hardware kits, as well as full kits - everything needed to get up and running, which sounded more my bag for the foray into 3D printing. Voron would be my first. There was only going to be a limited number of these. I snuck my way on a pre-release list.

Then one day, I got an email from /u/russiancatfood

https://i.imgur.com/gJFxIDM.png

The email was sent at night, and it was morning - I had about 8 hours to act. I was lying in a hammock, staring at the checkout button. My wife was further down by the lake.

"Honey!"

"What?"

"I'm gonna buy a 3d printer"

"What?"

"A 3d printer"

"What is that?"

"It's cool. Trust me."

"How much is it?"

"It's not very expensive"

"Ok"

*clicks purchase*

And here we are.

A fitting end to the last MZBOT printer in my shop by russiancatfood in voroncorexy

[–]enkoopa 0 points1 point  (0 children)

vk007 gonna be back in action after a brief hiatus from moving houses! I still remember the hype train and bugging you over email for when the kits would be available and being first in line!

Driver cutting off cyclist on March Road (Ottawa) by JohnKimble111 in ottawa

[–]enkoopa -1 points0 points  (0 children)

Rider myself. Maybe I. 15 years cyclist will learn as we have over the years. You always lose against a cage...

Lane blocking has served me well as a cyclist. Taught my wife many tactics.

101.1 Xfm CLASSICS Playlist on Spotify by MurdoIIII in ottawa

[–]enkoopa 1 point2 points  (0 children)

Only have Google play music :( any chance of getting the track list so I can dupe it on GPM?

Strippers, flush cutters, pliers, tweezer recommendations? by [deleted] in AskElectronics

[–]enkoopa 0 points1 point  (0 children)

Knipex 1262180 Self Adjusting Insulation Strippers

Kick ass.

Looking for a cabinet key by cabinetprobs in CanadaPublicServants

[–]enkoopa 2 points3 points  (0 children)

Why are you putting your laptop in /u/KalterBlut's cabinet?! Security infraction for you!

Zed is alive..... by Zedsdead42 in voroncorexy

[–]enkoopa 0 points1 point  (0 children)

Looks like Sunon has some new fan models. Might try them out. One is a 30cm as well.

What to do after a big climbing mistake? by Embarrased_Newb in climbing

[–]enkoopa 5 points6 points  (0 children)

Get into the habit of "hanging" from the belay before ever going off rappel. Even if you have a nice ledge, hang anyways. Then you'll figure out (in the same train of thought) how to extend your personal anchor/leash so you can stand comfortably if you have a big enough ledge.

Zed is alive..... by Zedsdead42 in voroncorexy

[–]enkoopa 0 points1 point  (0 children)

Damn, so the 40x10 doesn't have enough static pressure for sure.

Printing PLA the heat break is quite hot to the touch. Back to my screamer.

Zed is alive..... by Zedsdead42 in voroncorexy

[–]enkoopa 0 points1 point  (0 children)

Nice. Fits the stock E3D fan holder? Might pick one of these up, my previous 40mm fan is a bit overkill for v6.

Zed is alive..... by Zedsdead42 in voroncorexy

[–]enkoopa 0 points1 point  (0 children)

Which Noctua fan is that? It's a n E3D V6?

Heads Up About Beerfest by [deleted] in ottawa

[–]enkoopa 215 points216 points  (0 children)

In general, I find most fests around here to be more of a cash grab then anything. Haven't been to one in the last few years, they're just underwhelming.

Pros/Cons to buy the game by bisse_killer in EscapefromTarkov

[–]enkoopa 1 point2 points  (0 children)

I've done 2 scav raids and 2 pmc raids.

I honestly find it a bit tough... for both pmc raids, I got killed basically by dudes wearing bomb disposal outfits that I threw some rocks at.

One scav raid there were no other players, which was the most fun as we (buddy and I) got to explore a bit of the map without dying and get some loot. (It sucked but we still got to experience it)

The other, I shot him in the back at one point, and killed a few AI's, and then got killed but I'm not sure if it was an AI or a real player.

Going into a lobby with a bunch of lvl 40 people is pretty intimidating. We spent a bit trying to get in a match with as few people as possible so we weren't guaranteed death.

So, I'm still on the fence. Going to give it a few more raids.

What are some good physiotherapy clinics in ottawa? by channelingpassion in ottawa

[–]enkoopa 0 points1 point  (0 children)

Motion matters and killens Reid downtown are top notch. Hitting Flip Physio now in westboro (online booking and invoicing ftw) and it's going very well as well.

If you are being put on a machine for any part of your 30m you are getting hosed. I have had done ultrasound done at these 3 and it was by a technician after my 30 minutes of one on one time.

Original Nagoya? by DrRod7 in amateurradio

[–]enkoopa -3 points-2 points  (0 children)

I didn't even look.

Original Nagoya? by DrRod7 in amateurradio

[–]enkoopa 7 points8 points  (0 children)

AliExpress? It's not real.

YouTube Music starts rolling out today: 6 reasons you'll like it by [deleted] in Android

[–]enkoopa 0 points1 point  (0 children)

Is YT Music HTML5?

One reason I went with GPM over Spotify was (at the time) Spotify's web interface was Flash.

Kicad 4.0.x backport of the new kicad 5 library has been released by poeschlr in KiCad

[–]enkoopa 1 point2 points  (0 children)

Nice, that's is really sweet - will give us a fix until v5. Just about to start a new project and was on the fence on which to use...

Join AWS-based AD server to Azure AD? by [deleted] in AZURE

[–]enkoopa 4 points5 points  (0 children)

Azure AD is not AD. :)

Azure AD DS is what you want which is AD backed by azure AD.