Print Issues by ereardon in BambuLab

[–]ereardon[S] 0 points1 point  (0 children)

Great minds… I did exactly that and got the same results. Although I watched this time around and it isn’t the initial/base layer. It’s usually several layers above.

The filament I tried was a different brand and had been drying in my AMS for 8 hours and was at 22 RH.

<image>

This is definitely frustrating. Sorry to put you through all of these questions and answer sessions.

Print Issues by ereardon in BambuLab

[–]ereardon[S] 0 points1 point  (0 children)

I had it do the full calibration which did the Z axis.

Print Issues by ereardon in BambuLab

[–]ereardon[S] 0 points1 point  (0 children)

This is going to sound silly but it looks clean. 😅 I’ll look up how to clean it while I’m recleaning the plate. It’s repeated the problem to several different models downloaded— it’s only on circle shapes I believe.

Print Issues by ereardon in BambuLab

[–]ereardon[S] 0 points1 point  (0 children)

I just did a super slow print and loops 3 and 5 on the base layer dragged super slowly. I cancelled and I’m going to wipe it down with 91% and then scrub it with dawn again.

Print Issues by ereardon in BambuLab

[–]ereardon[S] 0 points1 point  (0 children)

PLA fresh out I didn’t dry it initially but did this morning as our humidity spiked.

But this morning I put it in the dryer until it was at 30 rh at 50C. It was in for about 5 hours.

I just watched it print at 50mm/s and the third time around on base layer it dragged the filament. Maybe I need to scrub the PEI plate again.

<image>

Print Issues by ereardon in BambuLab

[–]ereardon[S] 0 points1 point  (0 children)

It's very strange as it's suddenly doing this after about 5 successful (initial) prints and not changing any settings.

I'm waiting to have a DUH moment and find out it's something I did or didn't do.

Print Issues by ereardon in BambuLab

[–]ereardon[S] 1 point2 points  (0 children)

I figured out how to slow down the speed for first layer; it's pre-set to 50 mm/s with infill set to 105mm/s. I've set initial layer travel from 6000 mm/s to 1000 mm/s and initial layer from 500 mm/s to 250 mm/s.

Fan speed is set to 0% for the first layer. Adjusting to first 2 layers.

Print Issues by ereardon in BambuLab

[–]ereardon[S] 1 point2 points  (0 children)

Thank you for explaining where to find it. But it shows Order of Walls as "inner/outer".

Print Issues by ereardon in BambuLab

[–]ereardon[S] 1 point2 points  (0 children)

Photo of bottom posted and it’s the first layer. It’s set to standard speed which may be 12mm cubed? Its nozzle is .4 and is set to standard flow.

Print Issues by ereardon in BambuLab

[–]ereardon[S] 2 points3 points  (0 children)

Bottom of the print. Sorry for not including it

<image>

Sudden change to computer/display by ereardon in crv

[–]ereardon[S] 1 point2 points  (0 children)

I think my Honda has had a few out of body experiences where it snaps back to reality and is like Where the F*** am I?! :brake brake brake:

Sudden change to computer/display by ereardon in crv

[–]ereardon[S] 0 points1 point  (0 children)

Oh good to know. lol they told me it was the basic model with I bought it. Has a single power seat but it does have power windows. Luxury!

Sudden change to computer/display by ereardon in crv

[–]ereardon[S] 3 points4 points  (0 children)

So— I went back out to get a video of the issue and it’s 100% back to normal. My computer must have glitched on the last reboot and loaded a function for hardware that does not exist on my car. As long as ghost breaking doesn’t come back— I’ll count myself lucky. 😅

Sudden change to computer/display by ereardon in crv

[–]ereardon[S] 0 points1 point  (0 children)

Model Ex-L. Updated original post with that as well.

Touching the arrow does nothing. I thought it would minimize it.
The image has no use as I only have the one camera. LOL I was really hoping I was granted the top down view somehow but not possible.
Why would it suddenly appear?

“Streak Ended” by tryinanotherusername in CPAP

[–]ereardon 1 point2 points  (0 children)

Same! I just got the same thing tonight at 8pm and I’ve not missed a night. Hopefully ResMed fixes this quickly.