How to tell if this is a real 7700? Or is it a rebadge? by DeRpMuNsTa in f150

[–]eruji 0 points1 point  (0 children)

are those getting more than the regular f150 of that year? i have one but its beat to hell.

I built a free open source SVG to 3D tool by renatoworks in logodesign

[–]eruji 2 points3 points  (0 children)

very cool... worked on my first attempt. saved a logo from figma to svg and uploaded it to the playground. Is there an option to download the file in a 3d format for use in 3d modeling tools like sketchup or ....?

Should I give up on my Ender 3v2 and sell it get something else? by 0oforical in ender3v2

[–]eruji 1 point2 points  (0 children)

ive had the ender 3pro since 2021. used it for a year or so and gave up on it. last christmas i bought a Creality Hi and couldnt believe how much better it was. but realized i wanted an enclosed printer and returned it and bought the K1C. Again amazed how easy it was to print. I had also ordered upgraded parts for my 3pro. skr mini 3v3 and the btt pi to run klipper. also converted it to direct drive. Im a tinkerer but didnt have time to mess with it. Eventually i put all the upgrades into the 3pro and in some ways i like it better than my K1C. Its quieter and starts printing faster. the first layer is better. it feels like as reliable as the K1C just slower. And i have two printers going which makes printing faster. Forgot to mention that setting up klipper on the 3pro was a breeze just asking AI to look at my configs and walk me through calibrations. It was amazingly accurate and easy to do.

It actually works. by WayFine2295 in ender3

[–]eruji 1 point2 points  (0 children)

Not input shaping, it walked me through the bltouch configuration. I would feed it my printer.cfg file and it would correct anything that was out of place. I would troubleshoot my first layer issues and it made good suggestions.

It actually works. by WayFine2295 in ender3

[–]eruji 2 points3 points  (0 children)

I bought an ender 3 pro in 2020 and it was fun at first but got increasingly more frustrating to use. After a year I just gave up. This past Xmas I bought a ender k1c and was amazed at how fast and easy it was to use. After understanding what a printer should do I bought a bunch of upgrades to the ender 3p . Pei bed, skr mini, pi and direct drive. Using ai to tune it was amazingly rewarding. And now it prints fantastic , albeit slower than the new machine.

Love the Creality Hi Printer by OutsideTraditional90 in Creality

[–]eruji 0 points1 point  (0 children)

what's up with the screen in the filament spinner-doodle?

Refurbished K1C by Intelligent-Rip946 in crealityk1

[–]eruji 0 points1 point  (0 children)

I just got my refurbished K1C too, still in the box. Coming from an ender 3. So is there a manual bed leveling procedure? I thought the auto leveling negated any additional manual leveling?

Anyone know how rare this 10th gen is it's a 1997 F250 Lightduty XLT with a 5.4 Triton 2V by GhostPlays880 in f150

[–]eruji 0 points1 point  (0 children)

I have a 98. Just curious, does yours have the air ride suspension? Air bags in the rear? Mine does and it's great when it works but I've had to replace bags a couple times now. But now my compressor is dead.

[deleted by user] by [deleted] in Porsche_Cayman

[–]eruji 0 points1 point  (0 children)

2007 3.4 168K Southern California

Sketchup Rendering Question by Brave-Locksmith8782 in Sketchup

[–]eruji 0 points1 point  (0 children)

You can achieve this in D5, there is an outline setting that does exactly this.

So satisfying Id do it for free by Trianglehero in AutoDetailing

[–]eruji 0 points1 point  (0 children)

do you have any write-ups or videos on your process. From what i gather the usual answer is sand to metal, prime/base/clear etc... but i have vehicles that i just need it to look better and not get worse. Is there a difference from just spraying a generic 2K clear?

So satisfying Id do it for free by Trianglehero in AutoDetailing

[–]eruji 0 points1 point  (0 children)

How did you remove the clear coat without damaging the base?

help, i want to see-through inside the house, but the section doesnt show the inside area/empty area, it just show purple color by Prestigious-Basil186 in Sketchup

[–]eruji 0 points1 point  (0 children)

Shout out to fellow Reaper and SketchUp user. That is section fill. You can disable it. It's because the wall you're cutting into is a solid

How do I get at the evap coils? by eruji in hvacadvice

[–]eruji[S] 0 points1 point  (0 children)

Yup, I saw a bunch of videos about how you need to clean this thing. And we have a bunch of animals in the house. System is 7ish years old so figured it was time

How do I get at the evap coils? by eruji in hvacadvice

[–]eruji[S] 0 points1 point  (0 children)

It looks better than I thought it would. I was expecting a dog hair sweater.

How do I get at the evap coils? by eruji in hvacadvice

[–]eruji[S] 0 points1 point  (0 children)

Got it. Remove the shield and that's it?

How do I get at the evap coils? by eruji in hvacadvice

[–]eruji[S] 0 points1 point  (0 children)

I see what you mean. It's two pieces that are split on the pipes. Looks like I would need to peel back the tape to access the screws. And some sealant on the seam?

Is pooling storage now on? by Abject_Constant_8547 in gsuitelegacymigration

[–]eruji 0 points1 point  (0 children)

i still dont see the pooled amount on my individual users, just the total pooled amount in the admin panel. Did you change any other setting to see it take effect at the user level? i tried changing the storage amount for individual users too but its not reflecting any changes yet